Re: [Linuxwacom-discuss] Re: WacomOpenTablet: Connection timed out

[Emile de K. <e.d...@me...>]

Hi,

I get this:
cat: /dev/ttys0: input/output error
The same for ttys1.
When I login into windows (on the same computer), it reports having the 
tablet on com1.

Unplugging does not help either.

Anything?

Regards,
Emile


On Thursday, Oct 30, 2003, at 01:31 Europe/Amsterdam, Ping Linux wrote:
> cat /dev/ttyS0  (or cat /dev/ttyS1 if you use serial port 2). Move the 
> tool (pen or puck) on the tablet. You should see outputs from the 
> console you launched the cat command. If you don't see anything, there 
> might be two cases:
>
> 1.  The port is not the right one: Try another one;
>
> 2.  Something's wrong in the tablet serial connection: unplug the 
> tablet and power off the tablet ( not the system, physicallly unplug 
> the power cable to the tablet). Then plug them back in and try cat 
> again.
>
> Ping
>
> -----Original Message-----
> From: Emile de Kleine
> To: lin...@li...
> Sent: 10/29/03 5:27 AM
> Subject: [Linuxwacom-discuss] Re: WacomOpenTablet: Connection timed out
>
> Hi,
>
> I am experiencing exactly the same errors. :-(
> Did you make some progresion?
>
> Is there a way to find out to what serial port the tablet is actually
> connected?
>
> Regards,
> Emile
>
>
> Ruben Loef <rubenloef@ho...> wrote:
>>  'm using redhat 9 and I have a serial Graphire Tablet
>>  connected to ttyS1. When using wacdump I recieve the
>>  following error:
>>
>>  12:17:17.225 INFO: Opening log
>>  12:17:17.226 INFO: Setting baud rate to 38400
>>  12:17:17.226 INFO: Sending reset
>>  12:17:17.574 INFO: Setting baud rate to 19200
>>  12:17:17.574 INFO: Sending reset
>>  12:17:17.924 INFO: Setting baud rate to 9600
>>  12:17:17.924 INFO: Sending reset
>>  WacomOpenTablet: Connection timed out
>>
>>  This was discussed <a
>>   href="https://sourceforge.net/mailarchive/ 
>> message.php?msg_id=5508252">before
>>  </a>, but this didn't solve the problem. I've tried all
>>  the options mentioned and still recieve the error. I
>>  also tried to connect to ttyS0, but the same error
>>  occured. I hope someone can help me solving this problem.
>>
>>  Ruben
>
> _________________________________________________________________
> The new MSN 8: advanced junk mail protection and 2 months FREE*  
> http://join.msn.com/?page=features/junkmail
>