linuxvm-developer

[Linuxvm-dev] New card, can't get driver to install

[Matthew J. D. <mda...@se...>]

Ben,

I replaced the old card with a newer and am unable to get the driver to
install.  insmod vpb - returns 'no module by that name can be found'

The old card has 'RR177' on it and 4-3-02.  I assume your future drivers
will be backwards compatible with the older openline cards.

Can you please ssh in and if you can find anything.  If someone here locally
figues it out they will send you an email.

Aloha,
Matt

Re: [Linuxvm-dev] New card, can't get driver to install

[Vince H. <li...@ml...>]

On Wed, Jul 30, 2003 at 08:48:35AM -1000, Matthew John Darnell wrote: 
> I replaced the old card with a newer and am unable to get the
> driver to install. insmod vpb - returns 'no module by that name
> can be found'

I had to specify the full path. I updated the startup script to
load and unload the module with the start/stop options.

-Vince

Re: [Linuxvm-dev] New card, can't get driver to install

[Matthew J. D. <mda...@se...>]

> On Wed, Jul 30, 2003 at 08:48:35AM -1000, Matthew John Darnell wrote:
> > I replaced the old card with a newer and am unable to get the
> > driver to install. insmod vpb - returns 'no module by that name
> > can be found'
>
> I had to specify the full path. I updated the startup script to
> load and unload the module with the start/stop options.


I can't connect to any of the ports 1200-1203 and 'ctserver status' retuens
'ctserver dead but subsys locked'
The echo program in unittest returns 'exception caught:
VPBREG_NO_VPB_DEVICES_DETECTED, file: vpbreg.cpp line:369'

All this happened after the reboot when I changed the card.  The echo
program and walk test programs were working fine last night.
This has nothing to do with ctserver, these programs talk directly to the
driver.

I wonder if it got hosed with all the beta drivers we have installed.  I
could have a clean install by this evening.
I would be able to back up the entire home directory using the winscp
program, I would just drag the folder on to a local hard drive here.

Let me know,
Matt

Re: [Linuxvm-dev] New card, can't get driver to install

[Vince H. <li...@ml...>]

On Wed, Jul 30, 2003 at 10:15:57AM -1000, Matthew John Darnell wrote: 
> I can't connect to any of the ports 1200-1203 and 'ctserver
> status' retuens 'ctserver dead but subsys locked' The
> echo program in unittest returns 'exception caught:
> VPBREG_NO_VPB_DEVICES_DETECTED, file: vpbreg.cpp line:369'

It looks like the module loads clean, but ctserver segfaults.

-Vince

Re: [Linuxvm-dev] New card, can't get driver to install

[Ben K. <be...@vo...>]

Hiya,

well I just logged onto your machine and it looks like you have the
driver insmod'ed ok.
Is there still an issue ?

Cheers,

Ben.


On Thu, 2003-07-31 at 05:45, Matthew John Darnell wrote:
> 
> > On Wed, Jul 30, 2003 at 08:48:35AM -1000, Matthew John Darnell wrote:
> > > I replaced the old card with a newer and am unable to get the
> > > driver to install. insmod vpb - returns 'no module by that name
> > > can be found'
> >
> > I had to specify the full path. I updated the startup script to
> > load and unload the module with the start/stop options.
> 
> 
> I can't connect to any of the ports 1200-1203 and 'ctserver status' retuens
> 'ctserver dead but subsys locked'
> The echo program in unittest returns 'exception caught:
> VPBREG_NO_VPB_DEVICES_DETECTED, file: vpbreg.cpp line:369'
> 
> All this happened after the reboot when I changed the card.  The echo
> program and walk test programs were working fine last night.
> This has nothing to do with ctserver, these programs talk directly to the
> driver.
> 
> I wonder if it got hosed with all the beta drivers we have installed.  I
> could have a clean install by this evening.
> I would be able to back up the entire home directory using the winscp
> program, I would just drag the folder on to a local hard drive here.
> 
> Let me know,
> Matt
-- 
Ben Kramer <be...@vo...>

Re: [Linuxvm-dev] New card, can't get driver to install

[Matthew J. D. <mda...@se...>]

Were you able to get the echo or walk program to work?

I still get this error 'exception caught: VPBREG_NO_VPB_DEVICES_DETECTED,
file: vpbreg.cpp line:369'
'walk 0' just aborts.

-Matt


----- Original Message ----- 
From: "Ben Kramer" <be...@vo...>
To: "Matthew John Darnell" <mda...@se...>
Cc: <lin...@so...>
Sent: Wednesday, July 30, 2003 1:24 PM
Subject: Re: [Linuxvm-dev] New card, can't get driver to install


>
> Hiya,
>
> well I just logged onto your machine and it looks like you have the
> driver insmod'ed ok.
> Is there still an issue ?
>
> Cheers,
>
> Ben.
>
>
> On Thu, 2003-07-31 at 05:45, Matthew John Darnell wrote:
> >
> > > On Wed, Jul 30, 2003 at 08:48:35AM -1000, Matthew John Darnell wrote:
> > > > I replaced the old card with a newer and am unable to get the
> > > > driver to install. insmod vpb - returns 'no module by that name
> > > > can be found'
> > >
> > > I had to specify the full path. I updated the startup script to
> > > load and unload the module with the start/stop options.
> >
> >
> > I can't connect to any of the ports 1200-1203 and 'ctserver status'
retuens
> > 'ctserver dead but subsys locked'
> > The echo program in unittest returns 'exception caught:
> > VPBREG_NO_VPB_DEVICES_DETECTED, file: vpbreg.cpp line:369'
> >
> > All this happened after the reboot when I changed the card.  The echo
> > program and walk test programs were working fine last night.
> > This has nothing to do with ctserver, these programs talk directly to
the
> > driver.
> >
> > I wonder if it got hosed with all the beta drivers we have installed.  I
> > could have a clean install by this evening.
> > I would be able to back up the entire home directory using the winscp
> > program, I would just drag the folder on to a local hard drive here.
> >
> > Let me know,
> > Matt
> -- 
> Ben Kramer <be...@vo...>
>
>
>
> -------------------------------------------------------
> This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> Data Reports, E-commerce, Portals, and Forums are available now.
> Download today and enter to win an XBOX or Visual Studio .NET.
>
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
> _______________________________________________
> Linuxvm-developer mailing list
> Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linuxvm-developer
>

Re: [Linuxvm-dev] New card, can't get driver to install

[Ben K. <be...@vo...>]

Hi Matt,

I just had a look on your machine again. The board isnt showing up in
/proc/pci ! You should see something like this:
  Bus  0, device  12, function  0:
    Bridge: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 2).
      IRQ 11.
      Non-prefetchable 32 bit memory at 0xf0800000 [0xf080007f].
      I/O at 0xa400 [0xa47f].
      Non-prefetchable 32 bit memory at 0xf0000000 [0xf00000ff].

Remove the card, and clean the edge connector and try again.

Cheers,

Ben.

On Thu, 2003-07-31 at 10:44, Matthew John Darnell wrote:
> Were you able to get the echo or walk program to work?
> 
> I still get this error 'exception caught: VPBREG_NO_VPB_DEVICES_DETECTED,
> file: vpbreg.cpp line:369'
> 'walk 0' just aborts.
> 
> -Matt
> 
> 
> ----- Original Message ----- 
> From: "Ben Kramer" <be...@vo...>
> To: "Matthew John Darnell" <mda...@se...>
> Cc: <lin...@so...>
> Sent: Wednesday, July 30, 2003 1:24 PM
> Subject: Re: [Linuxvm-dev] New card, can't get driver to install
> 
> 
> >
> > Hiya,
> >
> > well I just logged onto your machine and it looks like you have the
> > driver insmod'ed ok.
> > Is there still an issue ?
> >
> > Cheers,
> >
> > Ben.
> >
> >
> > On Thu, 2003-07-31 at 05:45, Matthew John Darnell wrote:
> > >
> > > > On Wed, Jul 30, 2003 at 08:48:35AM -1000, Matthew John Darnell wrote:
> > > > > I replaced the old card with a newer and am unable to get the
> > > > > driver to install. insmod vpb - returns 'no module by that name
> > > > > can be found'
> > > >
> > > > I had to specify the full path. I updated the startup script to
> > > > load and unload the module with the start/stop options.
> > >
> > >
> > > I can't connect to any of the ports 1200-1203 and 'ctserver status'
> retuens
> > > 'ctserver dead but subsys locked'
> > > The echo program in unittest returns 'exception caught:
> > > VPBREG_NO_VPB_DEVICES_DETECTED, file: vpbreg.cpp line:369'
> > >
> > > All this happened after the reboot when I changed the card.  The echo
> > > program and walk test programs were working fine last night.
> > > This has nothing to do with ctserver, these programs talk directly to
> the
> > > driver.
> > >
> > > I wonder if it got hosed with all the beta drivers we have installed.  I
> > > could have a clean install by this evening.
> > > I would be able to back up the entire home directory using the winscp
> > > program, I would just drag the folder on to a local hard drive here.
> > >
> > > Let me know,
> > > Matt
> > -- 
> > Ben Kramer <be...@vo...>
> >
> >
> >
> > -------------------------------------------------------
> > This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> > Data Reports, E-commerce, Portals, and Forums are available now.
> > Download today and enter to win an XBOX or Visual Studio .NET.
> >
> http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
> > _______________________________________________
> > Linuxvm-developer mailing list
> > Lin...@li...
> > https://lists.sourceforge.net/lists/listinfo/linuxvm-developer
> >
-- 
Ben Kramer <be...@vo...>

Re: [Linuxvm-dev] New card, can't get driver to install

[Matthew J. D. <mda...@se...>]

You were right on, the new openline4 card does not sit correclty in the
chassis!  Good call.

I have the old one back in, but I am experencing the same symptom with the
old card, it will go to wait for ring, but not past that.

Could that be because of the older card

-Matt


----- Original Message ----- 
From: "Ben Kramer" <be...@vo...>
To: "Matthew John Darnell" <mda...@se...>
Cc: <lin...@so...>
Sent: Wednesday, July 30, 2003 3:21 PM
Subject: Re: [Linuxvm-dev] New card, can't get driver to install


>
> Hi Matt,
>
> I just had a look on your machine again. The board isnt showing up in
> /proc/pci ! You should see something like this:
>   Bus  0, device  12, function  0:
>     Bridge: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 2).
>       IRQ 11.
>       Non-prefetchable 32 bit memory at 0xf0800000 [0xf080007f].
>       I/O at 0xa400 [0xa47f].
>       Non-prefetchable 32 bit memory at 0xf0000000 [0xf00000ff].
>
> Remove the card, and clean the edge connector and try again.
>
> Cheers,
>
> Ben.
>
> On Thu, 2003-07-31 at 10:44, Matthew John Darnell wrote:
> > Were you able to get the echo or walk program to work?
> >
> > I still get this error 'exception caught:
VPBREG_NO_VPB_DEVICES_DETECTED,
> > file: vpbreg.cpp line:369'
> > 'walk 0' just aborts.
> >
> > -Matt
> >
> >
> > ----- Original Message ----- 
> > From: "Ben Kramer" <be...@vo...>
> > To: "Matthew John Darnell" <mda...@se...>
> > Cc: <lin...@so...>
> > Sent: Wednesday, July 30, 2003 1:24 PM
> > Subject: Re: [Linuxvm-dev] New card, can't get driver to install
> >
> >
> > >
> > > Hiya,
> > >
> > > well I just logged onto your machine and it looks like you have the
> > > driver insmod'ed ok.
> > > Is there still an issue ?
> > >
> > > Cheers,
> > >
> > > Ben.
> > >
> > >
> > > On Thu, 2003-07-31 at 05:45, Matthew John Darnell wrote:
> > > >
> > > > > On Wed, Jul 30, 2003 at 08:48:35AM -1000, Matthew John Darnell
wrote:
> > > > > > I replaced the old card with a newer and am unable to get the
> > > > > > driver to install. insmod vpb - returns 'no module by that name
> > > > > > can be found'
> > > > >
> > > > > I had to specify the full path. I updated the startup script to
> > > > > load and unload the module with the start/stop options.
> > > >
> > > >
> > > > I can't connect to any of the ports 1200-1203 and 'ctserver status'
> > retuens
> > > > 'ctserver dead but subsys locked'
> > > > The echo program in unittest returns 'exception caught:
> > > > VPBREG_NO_VPB_DEVICES_DETECTED, file: vpbreg.cpp line:369'
> > > >
> > > > All this happened after the reboot when I changed the card.  The
echo
> > > > program and walk test programs were working fine last night.
> > > > This has nothing to do with ctserver, these programs talk directly
to
> > the
> > > > driver.
> > > >
> > > > I wonder if it got hosed with all the beta drivers we have
installed.  I
> > > > could have a clean install by this evening.
> > > > I would be able to back up the entire home directory using the
winscp
> > > > program, I would just drag the folder on to a local hard drive here.
> > > >
> > > > Let me know,
> > > > Matt
> > > -- 
> > > Ben Kramer <be...@vo...>
> > >
> > >
> > >
> > > -------------------------------------------------------
> > > This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> > > Data Reports, E-commerce, Portals, and Forums are available now.
> > > Download today and enter to win an XBOX or Visual Studio .NET.
> > >
> >
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
> > > _______________________________________________
> > > Linuxvm-developer mailing list
> > > Lin...@li...
> > > https://lists.sourceforge.net/lists/listinfo/linuxvm-developer
> > >
> -- 
> Ben Kramer <be...@vo...>
>
>
>
> -------------------------------------------------------
> This SF.Net email sponsored by: Free pre-built ASP.NET sites including
> Data Reports, E-commerce, Portals, and Forums are available now.
> Download today and enter to win an XBOX or Visual Studio .NET.
>
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
> _______________________________________________
> Linuxvm-developer mailing list
> Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linuxvm-developer
>

Re: [Linuxvm-dev] New card, can't get driver to install

[Matt D. <mda...@se...>]

That is great news Ben!

I knew you could do it!!

-Matt


----- Original Message ----- 
From: "Ben Kramer" <be...@vo...>
To: "Matthew John Darnell" <mda...@se...>
Sent: Thursday, July 31, 2003 7:50 PM
Subject: Re: [Linuxvm-dev] New card, can't get driver to install


> Heya,
> 
> I fixed the problem :) I wil lhave a new release of the driver and
> ctserver for later today!
> 
> Cheers,
> 
> Ben.
>