Re: [linuxsh-dev] help CF

[Fabio G. <fg...@ti...>]

I think this is strange:
probing for hda: present=0, media=32, probetype=ATAPI
return 3
probe_for_drive()
do_probe()
probing for hdb: present=0, media=32, probetype=ATA
return 3
do_probe()
probing for hdb: present=0, media=32, probetype=ATAPI
return 3
probe_hwif_t()
probe_for_drive()
do_probe()
probing for hdc: present=0, media=32, probetype=ATA
return 3
do_probe()
probing for hdc: present=0, media=32, probetype=ATAPI
return 3
probe_for_drive()
do_probe()
probing for hdd: present=0, media=32, probetype=ATA
return 3
do_probe()
probing for hdd: present=0, media=32, probetype=ATAPI
return 3

Do you have really hda, hdb,hdc,hdd, or only hda but do you have a i/o 
mapping trouble?

And what  is the snapshot when you perform mount command?



On Tuesday 07 May 2002 19:40, akira wrote:
> I have forgotten:
>  file err.txt
> ----- Original Message -----
> From: "Fabio Giovagnini" <fg...@ti...>
> To: "akira" <aki...@ho...>; "lin...@m1..."
> <lin...@m1...>; <lin...@li...>
> Sent: Tuesday, May 07, 2002 7:31 PM
> Subject: Re: [linuxsh-dev] help CF
>
> > Should be usefull a snapshot of the output during the action you
> > performe. The patch are ok. What's the output?
> >
> > On Tuesday 07 May 2002 19:09, akira wrote:
> > > boot message:
> > >     err.txt
> > > add printk() message:
> > >     ide.patch
> > >     ide-probe.patch
> > >     ide-disk.patch
> > >
> > > ----- Original Message -----
> > > From: "Fabio Giovagnini" <fg...@ti...>
> > > To: "akira" <aki...@ho...>;
> > > <lin...@li...>; "lin...@m1..."
> > > <lin...@m1...>
> > > Sent: Tuesday, May 07, 2002 4:26 PM
> > > Subject: Re: [linuxsh-dev] help CF
> > >
> > > > test with a printk the function read_intr and write_intr of
> > > > ide-disk.c
> > >
> > > file
> > >
> > > > and let me know the output.
> > > >
> > > > On Tuesday 07 May 2002 16:10, akira wrote:
> > > > > The fstab file is:
> > > > >
> > > > > /dev/hda       /mnt/cf vfat  defaults 0 0
> > > > >
> > > > > /dev/hda1     /mnt/cf vfat  defaults 0 0
> > > > >
> > > > > /dev/hda1     /mnt/cf ext2 defaults 0 0
> > > > >
> > > > > When I try to mount the CF:
> > > > >
> > > > > # mount -a
> > > > >
> > > > > mount: Mounting /dev/hda on /mnt/cf failed: No such device or
>
> address
>
> > > > > mount: Mounting /dev/hda1 on /mnt/cf failed: No such device or
>
> address
>
> > > > > mount: Mounting /dev/hda1 on /mnt/cf failed: No such device or
>
> address
>
> > > > > When i try to format the CF
> > > > >
> > > > >
> > > > >
> > > > > # mkfs.minix /dev/hda
> > > > >
> > > > > mkfs.minix: /dev/hda: No such device or address
> > > > >
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > >
> > > > > From: "Fabio Giovagnini" <fg...@ti...>
> > > > > To: "akira" <aki...@ho...>; "lin...@m1..."
> > > > > <lin...@m1...>; <lin...@li...>
> > > > > Sent: Tuesday, May 07, 2002 9:02 AM
> > > > > Subject: Re: [linuxsh-dev] help CF
> > > > >
> > > > > > Whne you try to mount or format the CF, what is the message you
> > >
> > > receive
> > >
> > > > > from
> > > > >
> > > > > > the system?
> > > > > >
> > > > > > On Monday 06 May 2002 20:47, akira wrote:
> > > > > > > Hello to everyone!
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > I have a MS7727SE01 Solution Engine board. I use the kernel
>
> 2.4.18
>
> > > with
> > >
> > > > > the
> > > > >
> > > > > > > patch  from the CVS.sourceforge.net. The kernel boot correctly
>
> from
>
> > > a
> > >
> > > > > NFS
> > > > >
> > > > > > > server.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Now I have a Compact Flash (32 MByte) and a PCMCIA<>CF adapter
>
> and
>
> > > > > > > I
> > > > >
> > > > > will
> > > > >
> > > > > > > try to boot kernel from CF. I don't have a Notebook and so I
>
> can't
>
> > > > > format
> > > > >
> > > > > > > the CF card with a linux file system.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > I tried to format the CF card from the Solution Engine but I am
>
> not
>
> > > > > > > successful.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > I think the ide driver can't detect/mount the CF card.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > I had choose in the file .config:
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > CONFIG_CF_ENABLER=y
> > > > > > >
> > > > > > > CONFIG_CF_AREA6
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > CONFIG_IDE=y
> > > > > > >
> > > > > > > CONFIG_BLK_DEV_IDE=y
> > > > > > >
> > > > > > > CONFIG_BLOK_DEV_IDEDISK=y
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Someone can help me?
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Athac file:
> > > > > > >
> > > > > > > .config
> > > > > > >
> > > > > > > boot.txt
> > > > >
> > > > > _______________________________________________________________
> > > > >
> > > > > Have big pipes? SourceForge.net is looking for download mirrors. We
> > >
> > > supply
> > >
> > > > > the hardware. You get the recognition. Email Us:
> > >
> > > ban...@so...
> > >
> > > > > _______________________________________________
> > > > > linuxsh-dev mailing list
> > > > > lin...@li...
> > > > > https://lists.sourceforge.net/lists/listinfo/linuxsh-dev