Re: [linuxsh-dev] How to link sh-IPL+g

[Stuart M. <stu...@st...>]

Fabio

The only thing sh-stub needs to know is where RAM and ROM are.
Your board uses the standard Hitachi layout, so you can use the same
file as the SH4 SolutionEngine (sesh3.mem).

You will probably need to modify the init-xxx.S file you use though,
to set up the right memory timings for your board.

Stuart

On Tue, 19 Mar 2002 09:18:03 +0100
fg...@ti... wrote:

> I have a sh-3 7709a based board with the following memory map:
> 00000000h	Area0	Flash ROM
> 04000000h	Area1	SH7709A Internal Registers
> 08000000h	Area2	SH Bus
> 0C000000h	Area3	SDRAM
> 10000000h	Area4	Companion Chip
> 14000000h	Area5	SED 1355
> 18000000h	Area6	PCMCIA/ISA
> 1C000000h	Area7	SH7709A Internal Registers
> 
> 
> How I have to set .mem file to execute the sh-stub form Area 0.
> 
> 
> Thanks a lot.
> 
> Fabio Giovagnini
> 
> _______________________________________________
> linuxsh-dev mailing list
> lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linuxsh-dev


-- 
Stuart Menefy                                        stu...@st...
STMicroelectronics Ltd                         ST Intranet: mo.bri.st.com
Bristol, UK                         Rest of the World: www.linuxsh.st.com