Re: rts7751r2d cf_ide rework

[Magnus D. <mag...@gm...>]

On Nov 13, 2007 12:15 AM, shinkoi2005 <shi...@gm...> wrote:
>  > I'm glad that it works on your R2D-1. Both my R2D-1 boards do not have
>  > working CF. Just to double-check - are using a R2D with one or two pci
>  > slots?
> My R2D-1 has two pci slots.
> The picture is the following.
> <http://tree.celinuxforum.org/pubwiki/moin.cgi/RTS7751R2DHandlingManual>

Ok, that looks like the same model as I have.

> > Can you please post the BVERREG and VERREG register values from your
> > R2D-1? Then I'll post mine when I get back into the office.
> My R2D-1's VERREG and BVERREG is the folloing.
> R2D VERREG:0x0033, BVERREG:0x0011

My two R2D-1 boards say:
R2D VERREG:0x0033, BVERREG:0x0011 (00:00:e1:6b:5f:c2)
R2D VERREG:0x0034, BVERREG:0x0011 (00:00:87:6b:af:69)

The boards do not work with the only CF card we have in the office at
the moment. I'll bring a pile of different CF cards from home tomorrow
to check if the actual CF card is strange. I've seen interrupt
problems with certain older CF cards on other platforms earlier so
this wouldn't surprise me at all.

Thanks for your help!

/ magnus