Menu
▾
▴
sh: intc - irl mode update for sh7780 and sh7785
|
From: Magnus D. <mag...@gm...> - 2007-09-06 04:38:02
|
sh: intc - irl mode update for sh7780 and sh7785
This patch contains the following fixes and improvements:
- Fix address typo for INTMSK2 / INTMSKCLR2 registers on sh7780.
- Adds IRQ_MODE_IRLnnnn_MASK using intc controller for IRL masking.
- Good old IRQ_MODE_IRLnnnn should not register any intc controller.
- plat_irq_setup_pins() now selects IRL or IRQ mode.
- the holding function is now disabled using ICR0.
By default all external pin interrupts are disabled.
Signed-off-by: Magnus Damm <da...@ig...>
---
arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 43 ++++++++++++++++++++++++++++--
arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 45 +++++++++++++++++++++++++++++++-
include/asm-sh/hw_irq.h | 1
3 files changed, 85 insertions(+), 4 deletions(-)
--- 0001/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ work/arch/sh/kernel/cpu/sh4a/setup-sh7780.c 2007-09-05 12:43:57.000000000 +0900
@@ -10,6 +10,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
+#include <linux/io.h>
#include <asm/sci.h>
static struct resource rtc_resources[] = {
@@ -239,7 +240,7 @@ static struct intc_vect irl_vectors[] __
};
static struct intc_mask_reg irl3210_mask_registers[] __initdata = {
- { 0xffd00080, 0xffd00084, 32, /* INTMSK2 / INTMSKCLR2 */
+ { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
{ IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH,
@@ -247,7 +248,7 @@ static struct intc_mask_reg irl3210_mask
};
static struct intc_mask_reg irl7654_mask_registers[] __initdata = {
- { 0xffd00080, 0xffd00084, 32, /* INTMSK2 / INTMSKCLR2 */
+ { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH,
IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH,
@@ -261,8 +262,28 @@ static DECLARE_INTC_DESC(intc_irl7654_de
static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors,
NULL, NULL, irl3210_mask_registers, NULL, NULL);
+#define INTC_ICR0 0xffd00000
+#define INTC_INTMSK0 0xffd00044
+#define INTC_INTMSK1 0xffd00048
+#define INTC_INTMSK2 0xffd40080
+#define INTC_INTMSKCLR1 0xffd00068
+#define INTC_INTMSKCLR2 0xffd40084
+
void __init plat_irq_setup(void)
{
+ /* disable IRQ7-0 */
+ ctrl_outl(0xff000000, INTC_INTMSK0);
+
+ /* disable IRL3-0 + IRL7-4 */
+ ctrl_outl(0xc0000000, INTC_INTMSK1);
+ ctrl_outl(0xfffefffe, INTC_INTMSK2);
+
+ /* select IRL mode for IRL3-0 + IRL7-4 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+ /* disable holding function, ie enable "SH-4 Mode" */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
register_intc_controller(&intc_desc);
}
@@ -270,12 +291,28 @@ void __init plat_irq_setup_pins(int mode
{
switch (mode) {
case IRQ_MODE_IRQ:
+ /* select IRQ mode for IRL3-0 + IRL7-4 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0);
register_intc_controller(&intc_irq_desc);
break;
case IRQ_MODE_IRL7654:
- register_intc_controller(&intc_irl7654_desc);
+ /* enable IRL7-4 but don't provide any masking */
+ ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
+ /* enable IRL0-3 but don't provide any masking */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ break;
+ case IRQ_MODE_IRL7654_MASK:
+ /* enable IRL7-4 and mask using cpu intc controller */
+ ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ register_intc_controller(&intc_irl7654_desc);
+ break;
+ case IRQ_MODE_IRL3210_MASK:
+ /* enable IRL0-3 and mask using cpu intc controller */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_irl3210_desc);
break;
default:
--- 0001/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ work/arch/sh/kernel/cpu/sh4a/setup-sh7785.c 2007-09-05 12:41:44.000000000 +0900
@@ -10,6 +10,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
+#include <linux/io.h>
#include <asm/sci.h>
static struct plat_sci_port sci_platform_data[] = {
@@ -282,24 +283,66 @@ static DECLARE_INTC_DESC(intc_desc_irl01
static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567,
NULL, NULL, mask_registers, NULL, NULL);
+#define INTC_ICR0 0xffd00000
+#define INTC_INTMSK0 0xffd00044
+#define INTC_INTMSK1 0xffd00048
+#define INTC_INTMSK2 0xffd40080
+#define INTC_INTMSKCLR1 0xffd00068
+#define INTC_INTMSKCLR2 0xffd40084
+
void __init plat_irq_setup(void)
{
+ /* disable IRQ3-0 + IRQ7-4 */
+ ctrl_outl(0xff000000, INTC_INTMSK0);
+
+ /* disable IRL3-0 + IRL7-4 */
+ ctrl_outl(0xc0000000, INTC_INTMSK1);
+ ctrl_outl(0xfffefffe, INTC_INTMSK2);
+
+ /* select IRL mode for IRL3-0 + IRL7-4 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) & ~0x00c00000, INTC_ICR0);
+
+ /* disable holding function, ie enable "SH-4 Mode" */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00200000, INTC_ICR0);
+
register_intc_controller(&intc_desc);
}
void __init plat_irq_setup_pins(int mode)
{
+ ctrl_outl(0xc0000000, INTC_INTMSKCLR1);
+ ctrl_outl(0xfffefffe, INTC_INTMSKCLR2);
+ return;
+
switch (mode) {
case IRQ_MODE_IRQ7654:
+ /* select IRQ mode for IRL7-4 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00400000, INTC_ICR0);
register_intc_controller(&intc_desc_irq4567);
break;
case IRQ_MODE_IRQ3210:
+ /* select IRQ mode for IRL3-0 */
+ ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00800000, INTC_ICR0);
register_intc_controller(&intc_desc_irq0123);
break;
case IRQ_MODE_IRL7654:
- register_intc_controller(&intc_desc_irl4567);
+ /* enable IRL7-4 but don't provide any masking */
+ ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ ctrl_outl(0x0000fffe, INTC_INTMSKCLR2);
break;
case IRQ_MODE_IRL3210:
+ /* enable IRL0-3 but don't provide any masking */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
+ ctrl_outl(0xfffe0000, INTC_INTMSKCLR2);
+ break;
+ case IRQ_MODE_IRL7654_MASK:
+ /* enable IRL7-4 and mask using cpu intc controller */
+ ctrl_outl(0x40000000, INTC_INTMSKCLR1);
+ register_intc_controller(&intc_desc_irl4567);
+ break;
+ case IRQ_MODE_IRL3210_MASK:
+ /* enable IRL0-3 and mask using cpu intc controller */
+ ctrl_outl(0x80000000, INTC_INTMSKCLR1);
register_intc_controller(&intc_desc_irl0123);
break;
default:
--- 0001/include/asm-sh/hw_irq.h
+++ work/include/asm-sh/hw_irq.h 2007-09-04 17:04:28.000000000 +0900
@@ -95,6 +95,7 @@ int intc_set_priority(unsigned int irq,
void __init plat_irq_setup(void);
enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
+ IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
void __init plat_irq_setup_pins(int mode);
|
