Menu
▾
▴
sh: intc - add support for sh7619
|
From: Magnus D. <mag...@gm...> - 2007-08-16 10:29:15
|
sh: intc - add support for sh7619
This patch converts the cpu specific interrupt setup code for sh7619 from ipr
to intc. New vectors are also added to match the information provided by the
datasheet.
Signed-off-by: Magnus Damm <da...@ig...>
---
Compiles just fine but could use some testing on real target hardware.
arch/sh/kernel/cpu/sh2/setup-sh7619.c | 93 +++++++++++++++++++--------------
arch/sh/mm/Kconfig | 2
2 files changed, 57 insertions(+), 38 deletions(-)
--- 0001/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ work/arch/sh/kernel/cpu/sh2/setup-sh7619.c 2007-08-15 19:10:57.000000000 +0900
@@ -12,6 +12,61 @@
#include <linux/serial.h>
#include <asm/sci.h>
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+ WDT, EDMAC, CMT0, CMT1,
+ SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+ SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI,
+ SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
+ HIF_HIFI, HIF_HIFBI,
+ DMAC0, DMAC1, DMAC2, DMAC3,
+ SIOF,
+
+ /* interrupt groups */
+ SCIF0, SCIF1, SCIF2,
+};
+
+static struct intc_vect vectors[] __initdata = {
+ INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+ INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+ INTC_IRQ(IRQ4, 80), INTC_IRQ(IRQ5, 81),
+ INTC_IRQ(IRQ6, 82), INTC_IRQ(IRQ7, 83),
+ INTC_IRQ(WDT, 84), INTC_IRQ(EDMAC, 85),
+ INTC_IRQ(CMT0, 86), INTC_IRQ(CMT1, 87),
+ INTC_IRQ(SCIF0_ERI, 88), INTC_IRQ(SCIF0_RXI, 89),
+ INTC_IRQ(SCIF0_BRI, 90), INTC_IRQ(SCIF0_TXI, 91),
+ INTC_IRQ(SCIF1_ERI, 92), INTC_IRQ(SCIF1_RXI, 93),
+ INTC_IRQ(SCIF1_BRI, 94), INTC_IRQ(SCIF1_TXI, 95),
+ INTC_IRQ(SCIF2_ERI, 96), INTC_IRQ(SCIF2_RXI, 97),
+ INTC_IRQ(SCIF2_BRI, 98), INTC_IRQ(SCIF2_TXI, 99),
+ INTC_IRQ(HIF_HIFI, 100), INTC_IRQ(HIF_HIFBI, 101),
+ INTC_IRQ(DMAC0, 104), INTC_IRQ(DMAC1, 105),
+ INTC_IRQ(DMAC2, 106), INTC_IRQ(DMAC3, 107),
+ INTC_IRQ(SIOF, 108),
+};
+
+static struct intc_group groups[] __initdata = {
+ INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
+ INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI),
+ INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+ { 0xf8140006, 0, 16, 4, /* IPRA */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+ { 0xf8140008, 0, 16, 4, /* IPRB */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+ { 0xf8080000, 0, 16, 4, /* IPRC */ { WDT, EDMAC, CMT0, CMT1 } },
+ { 0xf8080002, 0, 16, 4, /* IPRD */ { SCIF0, SCIF1, SCIF2 } },
+ { 0xf8080004, 0, 16, 4, /* IPRE */ { HIF_HIFI, HIF_HIFBI } },
+ { 0xf8080006, 0, 16, 4, /* IPRF */ { DMAC0, DMAC1, DMAC2, DMAC3 } },
+ { 0xf8080008, 0, 16, 4, /* IPRG */ { SIOF } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, groups,
+ NULL, NULL, prio_registers, NULL);
+
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xf8400000,
@@ -52,43 +107,7 @@ static int __init sh7619_devices_setup(v
}
__initcall(sh7619_devices_setup);
-static struct ipr_data ipr_irq_table[] = {
- { 86, 0, 4, 2 }, /* CMI0 */
- { 88, 1, 12, 3 }, /* SCIF0_ERI */
- { 89, 1, 12, 3 }, /* SCIF0_RXI */
- { 90, 1, 12, 3 }, /* SCIF0_BRI */
- { 91, 1, 12, 3 }, /* SCIF0_TXI */
- { 92, 1, 8, 3 }, /* SCIF1_ERI */
- { 93, 1, 8, 3 }, /* SCIF1_RXI */
- { 94, 1, 8, 3 }, /* SCIF1_BRI */
- { 95, 1, 8, 3 }, /* SCIF1_TXI */
- { 96, 1, 4, 3 }, /* SCIF2_ERI */
- { 97, 1, 4, 3 }, /* SCIF2_RXI */
- { 98, 1, 4, 3 }, /* SCIF2_BRI */
- { 99, 1, 4, 3 }, /* SCIF2_TXI */
-};
-
-static unsigned long ipr_offsets[] = {
- 0xf8080000, /* IPRC */
- 0xf8080002, /* IPRD */
- 0xf8080004, /* IPRE */
- 0xf8080006, /* IPRF */
- 0xf8080008, /* IPRG */
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-sh7619",
- },
-};
-
void __init plat_irq_setup(void)
{
- register_ipr_controller(&ipr_irq_desc);
+ register_intc_controller(&intc_desc);
}
--- 0006/arch/sh/mm/Kconfig
+++ work/arch/sh/mm/Kconfig 2007-08-15 19:12:43.000000000 +0900
@@ -50,7 +50,7 @@ choice
config CPU_SUBTYPE_SH7619
bool "Support SH7619 processor"
select CPU_SH2
- select CPU_HAS_IPR_IRQ
+ select CPU_HAS_INTC_IRQ
# SH-2A Processor Support
|
