sh: simplify board specific interrupt code for solution engine 7780

[Magnus D. <mag...@gm...>]

sh: simplify board specific interrupt code for solution engine 7780

The new intc code handles IRQ3 and IRQ7 in the cpu specific code already,
so there is no reason to duplicate that here.

Signed-off-by: Magnus Damm <da...@ig...>
---

 arch/sh/Kconfig              |    1 -
 arch/sh/boards/se/7780/irq.c |   28 +---------------------------
 2 files changed, 1 insertion(+), 28 deletions(-)

--- 0001/arch/sh/Kconfig
+++ work/arch/sh/Kconfig	2007-07-30 12:18:22.000000000 +0900
@@ -258,7 +258,6 @@ config SH_7780_SOLUTION_ENGINE
 	bool "SolutionEngine7780"
 	select SOLUTION_ENGINE
 	select SYS_SUPPORTS_PCI
-	select CPU_HAS_INTC2_IRQ
 	depends on CPU_SUBTYPE_SH7780
 	help
 	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
--- 0001/arch/sh/boards/se/7780/irq.c
+++ work/arch/sh/boards/se/7780/irq.c	2007-07-30 12:16:31.000000000 +0900
@@ -16,32 +16,6 @@
 #include <asm/io.h>
 #include <asm/se7780.h>
 
-static struct intc2_data intc2_irq_table[] = {
-	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT1 */
-	{ 4,  0, 30, 0, 30, 3 }, /* daughter board EXTINT2 */
-	{ 6,  0, 29, 0, 29, 3 }, /* daughter board EXTINT3 */
-	{ 8,  0, 28, 0, 28, 3 }, /* SMC 91C111 (LAN) */
-	{ 10, 0, 27, 0, 27, 3 }, /* daughter board EXTINT4 */
-	{ 4,  0, 30, 0, 30, 3 }, /* daughter board EXTINT5 */
-	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT6 */
-	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT7 */
-	{ 2,  0, 31, 0, 31, 3 }, /* daughter board EXTINT8 */
-	{ 0 , 0, 24, 0, 24, 3 }, /* SM501 */
-};
-
-static struct intc2_desc intc2_irq_desc __read_mostly = {
-	.prio_base	= 0, /* N/A */
-	.msk_base	= 0xffd00044,
-	.mskclr_base	= 0xffd00064,
-
-	.intc2_data	= intc2_irq_table,
-	.nr_irqs	= ARRAY_SIZE(intc2_irq_table),
-
-	.chip = {
-		.name	= "INTC2-se7780",
-	},
-};
-
 /*
  * Initialize IRQ setting
  */
@@ -68,5 +42,5 @@ void __init init_se7780_IRQ(void)
 	/* FPGA + 0x0A */
 	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
 
-	register_intc2_controller(&intc2_irq_desc);
+	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
 }