Menu
▾
▴
sh: intc - add support for SH7706, SH7707, SH7708, SH7709 V2
|
From: Magnus D. <mag...@gm...> - 2007-07-25 08:40:56
|
sh: intc - add support for SH7706, SH7707, SH7708, SH7709 V2
This patch unifies the cpu specific interrupt setup code for sh7706, sh7707,
sh7708 and sh7709 and moves the code into a new file called setup-sh770x.c.
It makes sense to share the setup code between these processors because most
hardware blocks are identical from a software point of view. With this patch
the sh770x processors now have a complete set of vectors that match with the
information provided by the data sheets. This is a big improvement for sh7708.
Vectors for IRQ4 and IRQ5 are enabled by default. Use plat_irq_setup_pins() if
pins IRQ0-3 should be used in IRQ mode.
This patch also unifies the platform device setup code which means that the
rtc driver now has platform data for all sh770x processors.
Version two of this patch cleans up the ifdefs in setup-sh770x.c.
Signed-off-by: Magnus Damm <da...@ig...>
---
The code is untested but compiles.
arch/sh/kernel/cpu/sh3/Makefile | 8 -
arch/sh/kernel/cpu/sh3/setup-sh7708.c | 43 ------
arch/sh/kernel/cpu/sh3/setup-sh7709.c | 145 ----------------------
arch/sh/kernel/cpu/sh3/setup-sh770x.c | 212 +++++++++++++++++++++++++++++++++
arch/sh/mm/Kconfig | 6
5 files changed, 220 insertions(+), 194 deletions(-)
--- 0001/arch/sh/kernel/cpu/sh3/Makefile
+++ work/arch/sh/kernel/cpu/sh3/Makefile 2007-07-25 17:18:33.000000000 +0900
@@ -6,10 +6,10 @@ obj-y := ex.o probe.o entry.o
# CPU subtype setup
obj-$(CONFIG_CPU_SUBTYPE_SH7705) += setup-sh7705.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh7709.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh7709.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh7708.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh7709.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setup-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh770x.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o
obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o
obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o
--- 0001/arch/sh/kernel/cpu/sh3/setup-sh7708.c
+++ /dev/null 2007-07-17 09:16:46.626928230 +0900
@@ -1,43 +0,0 @@
-/*
- * SH7708 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <asm/sci.h>
-
-static struct plat_sci_port sci_platform_data[] = {
- {
- .mapbase = 0xfffffe80,
- .flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCI,
- .irqs = { 23, 24, 25, 0 },
- }, {
- .flags = 0,
- }
-};
-
-static struct platform_device sci_device = {
- .name = "sh-sci",
- .id = -1,
- .dev = {
- .platform_data = sci_platform_data,
- },
-};
-
-static struct platform_device *sh7708_devices[] __initdata = {
- &sci_device,
-};
-
-static int __init sh7708_devices_setup(void)
-{
- return platform_add_devices(sh7708_devices,
- ARRAY_SIZE(sh7708_devices));
-}
-__initcall(sh7708_devices_setup);
--- 0001/arch/sh/kernel/cpu/sh3/setup-sh7709.c
+++ /dev/null 2007-07-17 09:16:46.626928230 +0900
@@ -1,145 +0,0 @@
-/*
- * SH7707/SH7709 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <asm/sci.h>
-
-static struct resource rtc_resources[] = {
- [0] = {
- .start = 0xfffffec0,
- .end = 0xfffffec0 + 0x1e,
- .flags = IORESOURCE_IO,
- },
- [1] = {
- .start = 20,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = 21,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 22,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct plat_sci_port sci_platform_data[] = {
- {
- .mapbase = 0xfffffe80,
- .flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCI,
- .irqs = { 23, 24, 25, 0 },
- }, {
- .mapbase = 0xa4000150,
- .flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCIF,
- .irqs = { 56, 57, 59, 58 },
- }, {
- .mapbase = 0xa4000140,
- .flags = UPF_BOOT_AUTOCONF,
- .type = PORT_IRDA,
- .irqs = { 52, 53, 55, 54 },
- }, {
- .flags = 0,
- }
-};
-
-static struct platform_device sci_device = {
- .name = "sh-sci",
- .id = -1,
- .dev = {
- .platform_data = sci_platform_data,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static struct platform_device *sh7709_devices[] __initdata = {
- &sci_device,
- &rtc_device,
-};
-
-static int __init sh7709_devices_setup(void)
-{
- return platform_add_devices(sh7709_devices,
- ARRAY_SIZE(sh7709_devices));
-}
-__initcall(sh7709_devices_setup);
-
-static struct ipr_data ipr_irq_table[] = {
- { 16, 0, 12, 2 }, /* TMU TUNI0 */
- { 17, 0, 8, 4 }, /* TMU TUNI1 */
- { 18, 0, 4, 1 }, /* TMU TUNI1 */
- { 19, 0, 4, 1 }, /* TMU TUNI1 */
- { 20, 0, 0, 2 }, /* RTC CUI */
- { 21, 0, 0, 2 }, /* RTC CUI */
- { 22, 0, 0, 2 }, /* RTC CUI */
-
- { 23, 1, 4, 3 }, /* SCI */
- { 24, 1, 4, 3 }, /* SCI */
- { 25, 1, 4, 3 }, /* SCI */
- { 26, 1, 4, 3 }, /* SCI */
- { 27, 1, 12, 3 }, /* WDT ITI */
-
- { 32, 2, 0, 1 }, /* IRQ 0 */
- { 33, 2, 4, 1 }, /* IRQ 1 */
- { 34, 2, 8, 1 }, /* IRQ 2 APM */
- { 35, 2, 12, 1 }, /* IRQ 3 TOUCHSCREEN */
-
- { 36, 3, 0, 1 }, /* IRQ 4 */
- { 37, 3, 4, 1 }, /* IRQ 5 */
-
- { 48, 4, 12, 7 }, /* DMA */
- { 49, 4, 12, 7 }, /* DMA */
- { 50, 4, 12, 7 }, /* DMA */
- { 51, 4, 12, 7 }, /* DMA */
-
- { 52, 4, 8, 3 }, /* IRDA */
- { 53, 4, 8, 3 }, /* IRDA */
- { 54, 4, 8, 3 }, /* IRDA */
- { 55, 4, 8, 3 }, /* IRDA */
-
- { 56, 4, 4, 3 }, /* SCIF */
- { 57, 4, 4, 3 }, /* SCIF */
- { 58, 4, 4, 3 }, /* SCIF */
- { 59, 4, 4, 3 }, /* SCIF */
-};
-
-static unsigned long ipr_offsets[] = {
- 0xfffffee2, /* 0: IPRA */
- 0xfffffee4, /* 1: IPRB */
- 0xa4000016, /* 2: IPRC */
- 0xa4000018, /* 3: IPRD */
- 0xa400001a, /* 4: IPRE */
-};
-
-static struct ipr_desc ipr_irq_desc = {
- .ipr_offsets = ipr_offsets,
- .nr_offsets = ARRAY_SIZE(ipr_offsets),
-
- .ipr_data = ipr_irq_table,
- .nr_irqs = ARRAY_SIZE(ipr_irq_table),
-
- .chip = {
- .name = "IPR-sh7709",
- },
-};
-
-void __init plat_irq_setup(void)
-{
- register_ipr_controller(&ipr_irq_desc);
-}
--- /dev/null
+++ work/arch/sh/kernel/cpu/sh3/setup-sh770x.c 2007-07-25 17:24:52.000000000 +0900
@@ -0,0 +1,212 @@
+/*
+ * SH3 Setup code for SH7706, SH7707, SH7708, SH7709
+ *
+ * Copyright (C) 2007 Magnus Damm
+ *
+ * Based on setup-sh7709.c
+ *
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <asm/sci.h>
+
+enum {
+ UNUSED = 0,
+
+ /* interrupt sources */
+ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+ PINT07, PINT815,
+ DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3,
+ SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI,
+ SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI,
+ SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI,
+ ADC_ADI,
+ TMU0, TMU1, TMU2_TUNI, TMU2_TICPI,
+ RTC_ATI, RTC_PRI, RTC_CUI,
+ WDT,
+ REF_RCMI, REF_ROVI,
+
+ /* interrupt groups */
+ RTC, REF, TMU2, DMAC, SCI, SCIF2, SCIF0,
+};
+
+static struct intc_vect vectors[] = {
+ INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+ INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
+ INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
+ INTC_VECT(RTC_CUI, 0x4c0),
+ INTC_VECT(SCI_ERI, 0x4e0), INTC_VECT(SCI_RXI, 0x500),
+ INTC_VECT(SCI_TXI, 0x520), INTC_VECT(SCI_TEI, 0x540),
+ INTC_VECT(WDT, 0x560),
+ INTC_VECT(REF_RCMI, 0x580),
+ INTC_VECT(REF_ROVI, 0x5a0),
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+ INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
+ INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
+ INTC_VECT(ADC_ADI, 0x980),
+ INTC_VECT(SCIF2_ERI, 0x900), INTC_VECT(SCIF2_RXI, 0x920),
+ INTC_VECT(SCIF2_BRI, 0x940), INTC_VECT(SCIF2_TXI, 0x960),
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
+ INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
+ INTC_VECT(SCIF0_BRI, 0x8c0), INTC_VECT(SCIF0_TXI, 0x8e0),
+#endif
+};
+
+static struct intc_group groups[] = {
+ INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI),
+ INTC_GROUP(TMU2, TMU2_TUNI, TMU2_TICPI),
+ INTC_GROUP(REF, REF_RCMI, REF_ROVI),
+ INTC_GROUP(DMAC, DMAC_DEI0, DMAC_DEI1, DMAC_DEI2, DMAC_DEI3),
+ INTC_GROUP(SCI, SCI_ERI, SCI_RXI, SCI_TXI, SCI_TEI),
+ INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI),
+ INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI),
+};
+
+static struct intc_prio priorities[] = {
+ INTC_PRIO(DMAC, 7),
+ INTC_PRIO(SCI, 3),
+ INTC_PRIO(SCIF2, 3),
+ INTC_PRIO(SCIF0, 3),
+};
+
+static struct intc_prio_reg prio_registers[] = {
+ { 0xfffffee2, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } },
+ { 0xfffffee4, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } },
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ { 0xa4000016, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+ { 0xa4000018, 16, 4, /* IPRD */ { 0, 0, IRQ4, IRQ5 } },
+ { 0xa400001a, 16, 4, /* IPRE */ { DMAC, 0, SCIF2, ADC_ADI } },
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ { 0xa4000018, 16, 4, /* IPRD */ { PINT07, PINT815, } },
+ { 0xa400001a, 16, 4, /* IPRE */ { 0, SCIF0 } },
+#endif
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups,
+ priorities, NULL, prio_registers, NULL);
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+static struct intc_vect vectors_irq[] = {
+ INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+ INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+};
+
+static DECLARE_INTC_DESC(intc_desc_irq, "sh770x-irq", vectors_irq, NULL,
+ priorities, NULL, prio_registers, NULL);
+#endif
+
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = 0xfffffec0,
+ .end = 0xfffffec0 + 0x1e,
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = 21,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = 22,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
+static struct plat_sci_port sci_platform_data[] = {
+ {
+ .mapbase = 0xfffffe80,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCI,
+ .irqs = { 23, 24, 25, 0 },
+ },
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ {
+ .mapbase = 0xa4000150,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 56, 57, 59, 58 },
+ },
+#endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ {
+ .mapbase = 0xa4000140,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_IRDA,
+ .irqs = { 52, 53, 55, 54 },
+ },
+#endif
+ {
+ .flags = 0,
+ }
+};
+
+static struct platform_device sci_device = {
+ .name = "sh-sci",
+ .id = -1,
+ .dev = {
+ .platform_data = sci_platform_data,
+ },
+};
+
+static struct platform_device *sh770x_devices[] __initdata = {
+ &sci_device,
+ &rtc_device,
+};
+
+static int __init sh770x_devices_setup(void)
+{
+ return platform_add_devices(sh770x_devices,
+ ARRAY_SIZE(sh770x_devices));
+}
+__initcall(sh770x_devices_setup);
+
+void __init plat_irq_setup_pins(int mode)
+{
+ if (mode == IRQ_MODE_IRQ) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7709)
+ register_intc_controller(&intc_desc_irq);
+ return;
+#endif
+ }
+ BUG();
+}
+
+void __init plat_irq_setup(void)
+{
+ register_intc_controller(&intc_desc);
+}
--- 0002/arch/sh/mm/Kconfig
+++ work/arch/sh/mm/Kconfig 2007-07-25 17:18:33.000000000 +0900
@@ -71,19 +71,21 @@ config CPU_SUBTYPE_SH7705
config CPU_SUBTYPE_SH7706
bool "Support SH7706 processor"
select CPU_SH3
- select CPU_HAS_IPR_IRQ
+ select CPU_HAS_INTC_IRQ
help
Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
config CPU_SUBTYPE_SH7707
bool "Support SH7707 processor"
select CPU_SH3
+ select CPU_HAS_INTC_IRQ
help
Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.
config CPU_SUBTYPE_SH7708
bool "Support SH7708 processor"
select CPU_SH3
+ select CPU_HAS_INTC_IRQ
help
Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or
if you have a 100 Mhz SH-3 HD6417708R CPU.
@@ -91,7 +93,7 @@ config CPU_SUBTYPE_SH7708
config CPU_SUBTYPE_SH7709
bool "Support SH7709 processor"
select CPU_SH3
- select CPU_HAS_IPR_IRQ
+ select CPU_HAS_INTC_IRQ
help
Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
|
