Menu
▾
▴
sh: remove support for sh7300 and solution engine 7300
|
From: Magnus D. <mag...@gm...> - 2007-07-24 14:46:34
|
sh: remove support for sh7300 and solution engine 7300
This patch removes old dead code:
- kill off sh7300 cpu support
- get rid of broken solution engine 7300 board support
Signed-off-by: Magnus Damm <da...@ig...>
---
arch/sh/Kconfig | 10
arch/sh/Makefile | 1
arch/sh/boards/se/7300/Makefile | 5
arch/sh/boards/se/7300/io.c | 268 ------------
arch/sh/boards/se/7300/irq.c | 40 -
arch/sh/boards/se/7300/setup.c | 74 ---
arch/sh/configs/se7300_defconfig | 696 ---------------------------------
arch/sh/kernel/cpu/irq/ipr.c | 2
arch/sh/kernel/cpu/sh3/Makefile | 4
arch/sh/kernel/cpu/sh3/clock-sh7300.c | 78 ---
arch/sh/kernel/cpu/sh3/clock-sh7710.c | 78 +++
arch/sh/kernel/cpu/sh3/setup-sh7300.c | 43 --
arch/sh/kernel/setup.c | 1
arch/sh/kernel/timers/timer-tmu.c | 3
arch/sh/mm/Kconfig | 4
drivers/serial/sh-sci.c | 9
drivers/serial/sh-sci.h | 30 -
include/asm-sh/bugs.h | 2
include/asm-sh/cpu-sh3/freq.h | 4
include/asm-sh/cpu-sh3/mmu_context.h | 1
include/asm-sh/cpu-sh3/timer.h | 3
include/asm-sh/processor.h | 2
include/asm-sh/ubc.h | 3
23 files changed, 96 insertions(+), 1265 deletions(-)
--- 0002/arch/sh/Kconfig
+++ work/arch/sh/Kconfig 2007-07-24 19:41:57.000000000 +0900
@@ -258,14 +258,6 @@ config SH_7780_SOLUTION_ENGINE
Select 7780 SolutionEngine if configuring for a Renesas SH7780
evaluation board.
-config SH_7300_SOLUTION_ENGINE
- bool "SolutionEngine7300"
- select SOLUTION_ENGINE
- depends on CPU_SUBTYPE_SH7300
- help
- Select 7300 SolutionEngine if configuring for a Hitachi
- SH7300(SH-Mobile V) evaluation board.
-
config SH_7343_SOLUTION_ENGINE
bool "SolutionEngine7343"
select SOLUTION_ENGINE
@@ -448,7 +440,7 @@ config SH_PCLK_FREQ
default "27000000" if CPU_SUBTYPE_SH73180 || CPU_SUBTYPE_SH7343
default "31250000" if CPU_SUBTYPE_SH7619
default "32000000" if CPU_SUBTYPE_SH7722
- default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || \
+ default "33333333" if CPU_SUBTYPE_SH7770 || \
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7206
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
--- 0001/arch/sh/Makefile
+++ work/arch/sh/Makefile 2007-07-24 19:41:57.000000000 +0900
@@ -91,7 +91,6 @@ machdir-$(CONFIG_SH_SOLUTION_ENGINE) +=
machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722
machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751
machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780
-machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) += se/7300
machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343
machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) += se/73180
machdir-$(CONFIG_SH_HP6XX) += hp6xx
--- 0001/arch/sh/boards/se/7300/Makefile
+++ /dev/null 2007-07-17 09:16:46.626928230 +0900
@@ -1,5 +0,0 @@
-#
-# Makefile for the 7300 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o io.o irq.o
--- 0001/arch/sh/boards/se/7300/io.c
+++ /dev/null 2007-07-17 09:16:46.626928230 +0900
@@ -1,268 +0,0 @@
-/*
- * arch/sh/boards/se/7300/io.c
- *
- * Copyright (C) 2003 YOSHII Takashi <yos...@hi...>
- * Based on arch/sh/kernel/io_shmse.c
- *
- * I/O routine for SH-Mobile3 73180 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <asm/se7300.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
- unsigned long start, end;
- unsigned long base;
- struct iop *(*check) (struct iop * p, unsigned long port);
- unsigned char (*inb) (struct iop * p, unsigned long port);
- unsigned short (*inw) (struct iop * p, unsigned long port);
- void (*outb) (struct iop * p, unsigned char value, unsigned long port);
- void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
- if ((p->start <= port) && (port <= p->end))
- return p;
- else
- badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
- if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
- return p;
- return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
- return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
- return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- *(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
- *(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
- unsigned long addr = p->base + port + 0x40000;
- unsigned long v;
-
- if (port & 1)
- addr += 0x00400000;
- v = *(volatile unsigned char *) addr;
- return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- unsigned long addr = p->base + port + 0x40000;
-
- if (port & 1)
- addr += 0x00400000;
- *(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
- badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
- badio(inw, port);
-}
-
-#ifdef CONFIG_SMC91X
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
- .start = 0x300,
- .end = 0x30f,
- .base = 0xb4000000,
- .check = simple_check,
- .inb = simple_inb,
- .inw = simple_inw,
- .outb = simple_outb,
- .outw = simple_outw,
-};
-#endif
-
-/* NE2000 pc card NIC */
-static struct iop neiop = {
- .start = 0x280,
- .end = 0x29f,
- .base = 0xb0600000 + 0x80, /* soft 0x280 -> hard 0x300 */
- .check = simple_check,
- .inb = pcc_inb,
- .inw = simple_inw,
- .outb = pcc_outb,
- .outw = simple_outw,
-};
-
-#ifdef CONFIG_IDE
-/* CF in CF slot */
-static struct iop cfiop = {
- .base = 0xb0600000,
- .check = ide_check,
- .inb = pcc_inb,
- .inw = simple_inw,
- .outb = pcc_outb,
- .outw = simple_outw,
-};
-#endif
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
- if (0) ;
-#if defined(CONFIG_SMC91X)
- else if (laniop.check(&laniop, port))
- return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
- else if (neiop.check(&neiop, port))
- return &neiop;
-#endif
-#if defined(CONFIG_IDE)
- else if (cfiop.check(&cfiop, port))
- return &cfiop;
-#endif
- else
- return &neiop; /* fallback */
-}
-
-static inline void
-delay(void)
-{
- ctrl_inw(0xac000000);
- ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh7300se_inb(unsigned long port)
-{
- struct iop *p = port2iop(port);
- return (p->inb) (p, port);
-}
-
-unsigned char
-sh7300se_inb_p(unsigned long port)
-{
- unsigned char v = sh7300se_inb(port);
- delay();
- return v;
-}
-
-unsigned short
-sh7300se_inw(unsigned long port)
-{
- struct iop *p = port2iop(port);
- return (p->inw) (p, port);
-}
-
-unsigned int
-sh7300se_inl(unsigned long port)
-{
- badio(inl, port);
-}
-
-void
-sh7300se_outb(unsigned char value, unsigned long port)
-{
- struct iop *p = port2iop(port);
- (p->outb) (p, value, port);
-}
-
-void
-sh7300se_outb_p(unsigned char value, unsigned long port)
-{
- sh7300se_outb(value, port);
- delay();
-}
-
-void
-sh7300se_outw(unsigned short value, unsigned long port)
-{
- struct iop *p = port2iop(port);
- (p->outw) (p, value, port);
-}
-
-void
-sh7300se_outl(unsigned int value, unsigned long port)
-{
- badio(outl, port);
-}
-
-void
-sh7300se_insb(unsigned long port, void *addr, unsigned long count)
-{
- unsigned char *a = addr;
- struct iop *p = port2iop(port);
- while (count--)
- *a++ = (p->inb) (p, port);
-}
-
-void
-sh7300se_insw(unsigned long port, void *addr, unsigned long count)
-{
- unsigned short *a = addr;
- struct iop *p = port2iop(port);
- while (count--)
- *a++ = (p->inw) (p, port);
-}
-
-void
-sh7300se_insl(unsigned long port, void *addr, unsigned long count)
-{
- badio(insl, port);
-}
-
-void
-sh7300se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned char *a = (unsigned char *) addr;
- struct iop *p = port2iop(port);
- while (count--)
- (p->outb) (p, *a++, port);
-}
-
-void
-sh7300se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned short *a = (unsigned short *) addr;
- struct iop *p = port2iop(port);
- while (count--)
- (p->outw) (p, *a++, port);
-}
-
-void
-sh7300se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- badio(outsw, port);
-}
--- 0001/arch/sh/boards/se/7300/irq.c
+++ /dev/null 2007-07-17 09:16:46.626928230 +0900
@@ -1,40 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7300/irq.c
- *
- * Copyright (C) 2003 Takashi Kusuda <kus...@hi...>
- *
- * SH-Mobile SolutionEngine 7300 Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7300.h>
-
-static struct ipr_data se7300_ipr_map[] = {
- /* PC_IRQ[0-3] -> IRQ0 (32) */
- { IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ },
- /* A_IRQ[0-3] -> IRQ1 (33) */
- { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ },
- { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
- { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
- { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
- { VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init
-init_7300se_IRQ(void)
-{
- ctrl_outw(0x0028, PA_EPLD_MODESET); /* mode set IRQ0,1 active low. */
- ctrl_outw(0xa000, INTC_ICR1); /* IRQ mode; IRQ0,1 enable. */
- ctrl_outw(0x0000, PORT_PFCR); /* use F for IRQ[3:0] and SIU. */
-
- make_ipr_irq(se7300_ipr_map, ARRAY_SIZE(se7300_ipr_map));
-
- ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */
-}
--- 0001/arch/sh/boards/se/7300/setup.c
+++ /dev/null 2007-07-17 09:16:46.626928230 +0900
@@ -1,74 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7300/setup.c
- *
- * Copyright (C) 2003 Takashi Kusuda <kus...@hi...>
- *
- * SH-Mobile SolutionEngine 7300 Support.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7300.h>
-
-void init_7300se_IRQ(void);
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = heartbeat_bit_pos,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct platform_device *se7300_devices[] __initdata = {
- &heartbeat_device,
-};
-
-static int __init se7300_devices_setup(void)
-{
- return platform_add_devices(se7300_devices, ARRAY_SIZE(se7300_devices));
-}
-__initcall(se7300_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7300se __initmv = {
- .mv_name = "SolutionEngine 7300",
- .mv_nr_irqs = 109,
- .mv_inb = sh7300se_inb,
- .mv_inw = sh7300se_inw,
- .mv_inl = sh7300se_inl,
- .mv_outb = sh7300se_outb,
- .mv_outw = sh7300se_outw,
- .mv_outl = sh7300se_outl,
-
- .mv_inb_p = sh7300se_inb_p,
- .mv_inw_p = sh7300se_inw,
- .mv_inl_p = sh7300se_inl,
- .mv_outb_p = sh7300se_outb_p,
- .mv_outw_p = sh7300se_outw,
- .mv_outl_p = sh7300se_outl,
-
- .mv_insb = sh7300se_insb,
- .mv_insw = sh7300se_insw,
- .mv_insl = sh7300se_insl,
- .mv_outsb = sh7300se_outsb,
- .mv_outsw = sh7300se_outsw,
- .mv_outsl = sh7300se_outsl,
-
- .mv_init_irq = init_7300se_IRQ,
-};
--- 0001/arch/sh/configs/se7300_defconfig
+++ /dev/null 2007-07-17 09:16:46.626928230 +0900
@@ -1,696 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct 3 11:43:22 2006
-#
-CONFIG_SUPERH=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System type
-#
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-CONFIG_SH_7300_SOLUTION_ENGINE=y
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
-CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-CONFIG_CPU_SUBTYPE_SH7300=y
-# CONFIG_CPU_SUBTYPE_SH7705 is not set
-# CONFIG_CPU_SUBTYPE_SH7706 is not set
-# CONFIG_CPU_SUBTYPE_SH7707 is not set
-# CONFIG_CPU_SUBTYPE_SH7708 is not set
-# CONFIG_CPU_SUBTYPE_SH7709 is not set
-# CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7750 is not set
-# CONFIG_CPU_SUBTYPE_SH7091 is not set
-# CONFIG_CPU_SUBTYPE_SH7750R is not set
-# CONFIG_CPU_SUBTYPE_SH7750S is not set
-# CONFIG_CPU_SUBTYPE_SH7751 is not set
-# CONFIG_CPU_SUBTYPE_SH7751R is not set
-# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7770 is not set
-# CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
-# CONFIG_CPU_SUBTYPE_SH7343 is not set
-
-#
-# Memory management options
-#
-CONFIG_MMU=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_MEMORY_START=0x0c000000
-CONFIG_MEMORY_SIZE=0x04000000
-CONFIG_VSYSCALL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-
-#
-# Cache configuration
-#
-# CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-
-#
-# Processor features
-#
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_SH_FPU_EMU is not set
-CONFIG_SH_DSP=y
-# CONFIG_SH_ADC is not set
-CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_SR_RB=y
-
-#
-# Timer support
-#
-CONFIG_SH_TMU=y
-CONFIG_SH_PCLK_FREQ=33333333
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# DMA support
-#
-# CONFIG_SH_DMA is not set
-
-#
-# Companion Chips
-#
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
-
-#
-# Kernel features
-#
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-
-#
-# Boot options
-#
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00210000
-# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0,38400 root=/dev/ram0"
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=2
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-CONFIG_IPMI_HANDLER=y
-# CONFIG_IPMI_PANIC_EVENT is not set
-CONFIG_IPMI_DEVICE_INTERFACE=y
-# CONFIG_IPMI_SI is not set
-CONFIG_IPMI_WATCHDOG=y
-# CONFIG_IPMI_POWEROFF is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-CONFIG_SOFT_WATCHDOG=y
-# CONFIG_SH_WDT is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
-CONFIG_SH_STANDARD_BIOS=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_KGDB=y
-
-#
-# KGDB configuration options
-#
-# CONFIG_MORE_COMPILE_OPTIONS is not set
-# CONFIG_KGDB_NMI is not set
-# CONFIG_KGDB_THREAD is not set
-# CONFIG_SH_KGDB_CONSOLE is not set
-# CONFIG_KGDB_SYSRQ is not set
-# CONFIG_KGDB_KERNEL_ASSERTS is not set
-
-#
-# Serial port setup
-#
-CONFIG_KGDB_DEFPORT=1
-CONFIG_KGDB_DEFBAUD=115200
-CONFIG_KGDB_DEFPARITY_N=y
-# CONFIG_KGDB_DEFPARITY_E is not set
-# CONFIG_KGDB_DEFPARITY_O is not set
-CONFIG_KGDB_DEFBITS_8=y
-# CONFIG_KGDB_DEFBITS_7 is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
--- 0001/arch/sh/kernel/cpu/irq/ipr.c
+++ work/arch/sh/kernel/cpu/irq/ipr.c 2007-07-24 19:41:57.000000000 +0900
@@ -8,7 +8,7 @@
*
* Supported system:
* On-chip supporting modules (TMU, RTC, etc.).
- * On-chip supporting modules for SH7709/SH7709A/SH7729/SH7300.
+ * On-chip supporting modules for SH7709/SH7709A/SH7729.
* Hitachi SolutionEngine external I/O:
* MS7709SE01, MS7709ASE01, and MS7750SE01
*
--- 0001/arch/sh/kernel/cpu/sh3/Makefile
+++ work/arch/sh/kernel/cpu/sh3/Makefile 2007-07-24 19:41:57.000000000 +0900
@@ -10,16 +10,14 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7706) += setu
obj-$(CONFIG_CPU_SUBTYPE_SH7707) += setup-sh7709.o
obj-$(CONFIG_CPU_SUBTYPE_SH7708) += setup-sh7708.o
obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh7709.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7300) += setup-sh7300.o
obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o
obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o
# Primary on-chip clocks (common)
clock-$(CONFIG_CPU_SH3) := clock-sh3.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7300) := clock-sh7300.o
clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o
clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o
clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7300.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o
obj-y += $(clock-y)
--- 0001/arch/sh/kernel/cpu/sh3/clock-sh7300.c
+++ /dev/null 2007-07-17 09:16:46.626928230 +0900
@@ -1,78 +0,0 @@
-/*
- * arch/sh/kernel/cpu/sh3/clock-sh7300.c
- *
- * SH7300 support for the clock framework
- *
- * Copyright (C) 2005 Paul Mundt
- *
- * FRQCR parsing hacked out of arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <pr...@tu...>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mr...@li...>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-#include <asm/io.h>
-
-static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
-
-static void master_clk_init(struct clk *clk)
-{
- clk->rate *= md_table[ctrl_inw(FRQCR) & 0x0007];
-}
-
-static struct clk_ops sh7300_master_clk_ops = {
- .init = master_clk_init,
-};
-
-static void module_clk_recalc(struct clk *clk)
-{
- int idx = (ctrl_inw(FRQCR) & 0x0007);
- clk->rate = clk->parent->rate / md_table[idx];
-}
-
-static struct clk_ops sh7300_module_clk_ops = {
- .recalc = module_clk_recalc,
-};
-
-static void bus_clk_recalc(struct clk *clk)
-{
- int idx = (ctrl_inw(FRQCR) & 0x0700) >> 8;
- clk->rate = clk->parent->rate / md_table[idx];
-}
-
-static struct clk_ops sh7300_bus_clk_ops = {
- .recalc = bus_clk_recalc,
-};
-
-static void cpu_clk_recalc(struct clk *clk)
-{
- int idx = (ctrl_inw(FRQCR) & 0x0070) >> 4;
- clk->rate = clk->parent->rate / md_table[idx];
-}
-
-static struct clk_ops sh7300_cpu_clk_ops = {
- .recalc = cpu_clk_recalc,
-};
-
-static struct clk_ops *sh7300_clk_ops[] = {
- &sh7300_master_clk_ops,
- &sh7300_module_clk_ops,
- &sh7300_bus_clk_ops,
- &sh7300_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
- if (idx < ARRAY_SIZE(sh7300_clk_ops))
- *ops = sh7300_clk_ops[idx];
-}
-
--- /dev/null
+++ work/arch/sh/kernel/cpu/sh3/clock-sh7710.c 2007-07-24 19:41:57.000000000 +0900
@@ -0,0 +1,78 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7710.c
+ *
+ * SH7710 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <pr...@tu...>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mr...@li...>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= md_table[ctrl_inw(FRQCR) & 0x0007];
+}
+
+static struct clk_ops sh7710_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0007);
+ clk->rate = clk->parent->rate / md_table[idx];
+}
+
+static struct clk_ops sh7710_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0700) >> 8;
+ clk->rate = clk->parent->rate / md_table[idx];
+}
+
+static struct clk_ops sh7710_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0070) >> 4;
+ clk->rate = clk->parent->rate / md_table[idx];
+}
+
+static struct clk_ops sh7710_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7710_clk_ops[] = {
+ &sh7710_master_clk_ops,
+ &sh7710_module_clk_ops,
+ &sh7710_bus_clk_ops,
+ &sh7710_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7710_clk_ops))
+ *ops = sh7710_clk_ops[idx];
+}
+
--- 0001/arch/sh/kernel/cpu/sh3/setup-sh7300.c
+++ /dev/null 2007-07-17 09:16:46.626928230 +0900
@@ -1,43 +0,0 @@
-/*
- * SH7300 Setup
- *
- * Copyright (C) 2006 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <asm/sci.h>
-
-static struct plat_sci_port sci_platform_data[] = {
- {
- .mapbase = 0xa4430000,
- .flags = UPF_BOOT_AUTOCONF,
- .type = PORT_SCI,
- .irqs = { 80, 80, 80, 80 },
- }, {
- .flags = 0,
- }
-};
-
-static struct platform_device sci_device = {
- .name = "sh-sci",
- .id = -1,
- .dev = {
- .platform_data = sci_platform_data,
- },
-};
-
-static struct platform_device *sh7300_devices[] __initdata = {
- &sci_device,
-};
-
-static int __init sh7300_devices_setup(void)
-{
- return platform_add_devices(sh7300_devices,
- ARRAY_SIZE(sh7300_devices));
-}
-__initcall(sh7300_devices_setup);
--- 0001/arch/sh/kernel/setup.c
+++ work/arch/sh/kernel/setup.c 2007-07-24 19:41:57.000000000 +0900
@@ -276,7 +276,6 @@ void __init setup_arch(char **cmdline_p)
static const char *cpu_name[] = {
[CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619",
- [CPU_SH7300] = "SH7300",
[CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706",
[CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708",
[CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710",
--- 0001/arch/sh/kernel/timers/timer-tmu.c
+++ work/arch/sh/kernel/timers/timer-tmu.c 2007-07-24 19:41:57.000000000 +0900
@@ -173,8 +173,7 @@ static int tmu_timer_init(void)
tmu_timer_stop();
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && \
- !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
+#if !defined(CONFIG_CPU_SUBTYPE_SH7760) && \
!defined(CONFIG_CPU_SUBTYPE_SH7785) && \
!defined(CONFIG_CPU_SUBTYPE_SHX3)
ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
--- 0002/arch/sh/mm/Kconfig
+++ work/arch/sh/mm/Kconfig 2007-07-24 19:41:57.000000000 +0900
@@ -62,10 +62,6 @@ config CPU_SUBTYPE_SH7206
# SH-3 Processor Support
-config CPU_SUBTYPE_SH7300
- bool "Support SH7300 processor"
- select CPU_SH3
-
config CPU_SUBTYPE_SH7705
bool "Support SH7705 processor"
select CPU_SH3
--- 0001/drivers/serial/sh-sci.c
+++ work/drivers/serial/sh-sci.c 2007-07-24 19:41:57.000000000 +0900
@@ -12,6 +12,7 @@
* Modified to support multiple serial ports. Stuart Menefy (May 2000).
* Modified to support SecureEdge. David McCullough (2002)
* Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
+ * Removed SH7300 support (Jul 2007).
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -289,13 +290,7 @@ static void sci_init_pins_irda(struct ua
#endif
#if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-/* SH7300 doesn't use RTS/CTS */
-static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
-{
- sci_out(port, SCFCR, 0);
-}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
{
unsigned int fcr_val = 0;
--- 0001/drivers/serial/sh-sci.h
+++ work/drivers/serial/sh-sci.h 2007-07-24 22:20:18.000000000 +0900
@@ -9,6 +9,7 @@
* Modified to support multiple serial ports. Stuart Menefy (May 2000).
* Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
* Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
+ * Removed SH7300 support (Jul 2007).
*/
#include <linux/serial_core.h>
#include <asm/io.h>
@@ -73,11 +74,6 @@
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
-# define SCPCR 0xA4050116 /* 16 bit SCIF */
-# define SCPDR 0xA4050136 /* 16 bit SCIF */
-# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
-# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
# define SCSPTR0 0xA4400000 /* 16 bit SCIF */
# define SCI_NPORTS 2
@@ -230,7 +226,7 @@
#define SCIF_RDF 0x0002 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
#define SCIF_DR 0x0001 /* 7705 SCIF, 7707 SCIF, 7709 SCIF, 7750 SCIF */
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
#define SCIF_ORER 0x0200
#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER)
#define SCIF_RFDC_MASK 0x007f
@@ -259,7 +255,7 @@
# define SCxSR_ERRORS(port) SCIF_ERRORS
# define SCxSR_RDxF(port) SCIF_RDF
# define SCxSR_TDxE(port) SCIF_TDFE
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
# define SCxSR_ORER(port) SCIF_ORER
#else
# define SCxSR_ORER(port) 0x0000
@@ -267,13 +263,13 @@
# define SCxSR_FER(port) SCIF_FER
# define SCxSR_PER(port) SCIF_PER
# define SCxSR_BRK(port) SCIF_BRK
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
# define SCxSR_RDxF_CLEAR(port) (sci_in(port,SCxSR)&0xfffc)
# define SCxSR_ERROR_CLEAR(port) (sci_in(port,SCxSR)&0xfd73)
# define SCxSR_TDxE_CLEAR(port) (sci_in(port,SCxSR)&0xffdf)
# define SCxSR_BREAK_CLEAR(port) (sci_in(port,SCxSR)&0xffe3)
#else
-/* SH7705 can also use this, clearing is same between 7705 and 7709 and 7300 */
+/* SH7705 can also use this, clearing is same between 7705 and 7709 */
# define SCxSR_RDxF_CLEAR(port) 0x00fc
# define SCxSR_ERROR_CLEAR(port) 0x0073
# define SCxSR_TDxE_CLEAR(port) 0x00df
@@ -375,8 +371,7 @@
CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size)
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
-#elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \
- defined(CONFIG_CPU_SUBTYPE_SH7705)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
#define SCIF_FNS(name, scif_offset, scif_size) \
CPU_SCIF_FNS(name, scif_offset, scif_size)
#else
@@ -402,8 +397,7 @@
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
- defined(CONFIG_CPU_SUBTYPE_SH7705)
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
SCIF_FNS(SCSMR, 0x00, 16)
SCIF_FNS(SCBRR, 0x04, 8)
@@ -562,13 +556,6 @@ static inline int sci_rxd_in(struct uart
return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
-static inline int sci_rxd_in(struct uart_port *port)
-{
- if (port->mapbase == 0xa4430000)
- return ctrl_inb(SCPDR)&0x01 ? 1 : 0; /* SCIF0 */
- return 1;
-}
#elif defined(CONFIG_CPU_SUBTYPE_SH73180)
static inline int sci_rxd_in(struct uart_port *port)
{
@@ -721,8 +708,7 @@ static inline int sci_rxd_in(struct uart
* -- Mitch Davis - 15 Jul 2000
*/
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
- defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
--- 0001/include/asm-sh/bugs.h
+++ work/include/asm-sh/bugs.h 2007-07-24 19:41:57.000000000 +0900
@@ -29,7 +29,7 @@ static void __init check_bugs(void)
*p++ = '2';
*p++ = 'a';
break;
- case CPU_SH7705 ... CPU_SH7300:
+ case CPU_SH7705 ... CPU_SH7729:
*p++ = '3';
break;
case CPU_SH7750 ... CPU_SH4_501:
--- 0001/include/asm-sh/cpu-sh3/freq.h
+++ work/include/asm-sh/cpu-sh3/freq.h 2007-07-24 19:41:57.000000000 +0900
@@ -10,11 +10,7 @@
#ifndef __ASM_CPU_SH3_FREQ_H
#define __ASM_CPU_SH3_FREQ_H
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-#define FRQCR 0xa415ff80
-#else
#define FRQCR 0xffffff80
-#endif
#define MIN_DIVISOR_NR 0
#define MAX_DIVISOR_NR 4
--- 0001/include/asm-sh/cpu-sh3/mmu_context.h
+++ work/include/asm-sh/cpu-sh3/mmu_context.h 2007-07-24 19:41:57.000000000 +0900
@@ -30,7 +30,6 @@
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
defined(CONFIG_CPU_SUBTYPE_SH7709) || \
defined(CONFIG_CPU_SUBTYPE_SH7706) || \
- defined(CONFIG_CPU_SUBTYPE_SH7300) || \
defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7712) || \
defined(CONFIG_CPU_SUBTYPE_SH7710)
--- 0001/include/asm-sh/cpu-sh3/timer.h
+++ work/include/asm-sh/cpu-sh3/timer.h 2007-07-24 19:41:57.000000000 +0900
@@ -19,7 +19,6 @@
* SH7729R
* SH7710
* SH7720
- * SH7300
* SH7710
* ---------------------------------------------------------------------------
*/
@@ -28,7 +27,7 @@
#define TMU_TOCR 0xfffffe90 /* Byte access */
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
#define TMU_012_TSTR 0xa412fe92 /* Byte access */
#define TMU0_TCOR 0xa412fe94 /* Long access */
--- 0001/include/asm-sh/processor.h
+++ work/include/asm-sh/processor.h 2007-07-24 19:41:57.000000000 +0900
@@ -45,7 +45,7 @@ enum cpu_type {
CPU_SH7705, CPU_SH7706, CPU_SH7707,
CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
- CPU_SH7729, CPU_SH7300,
+ CPU_SH7729,
/* SH-4 types */
CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
--- 0001/include/asm-sh/ubc.h
+++ work/include/asm-sh/ubc.h 2007-07-24 19:41:57.000000000 +0900
@@ -15,8 +15,7 @@
#include <asm/cpu/ubc.h>
/* User Break Controller */
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7300)
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
#define UBC_TYPE_SH7729 (current_cpu_data.type == CPU_SH7729)
#else
#define UBC_TYPE_SH7729 0
|
