Menu
▾
▴
linuxsh-dev
|
From: Markus B. <sup...@go...> - 2007-07-23 07:16:14
|
Hello Paul,
this patch adds support for the Magic Panel Release 2 SH7720 board to 2.6.22.
The board is currently under development and not publicly available. We
thought that it is better to have a template than nothing to get the SH7720
running on another board. Maybe somebody with a Solution Engine Light (MS7720RP01)
volunteers to write a BSP for this board as a template.
Signed-off by: Markus Brunner <sup...@gm...>
Signed-off by: Mark Jonas <to...@gm...>
---
arch/sh/Kconfig | 11
arch/sh/Makefile | 1
arch/sh/boards/magicpanelr2/Makefile | 5
arch/sh/boards/magicpanelr2/irq.c | 80 ++
arch/sh/boards/magicpanelr2/setup.c | 305 +++++++++
arch/sh/configs/magicpanelr2_defconfig | 1016 +++++++++++++++++++++++++++++++++
arch/sh/drivers/heartbeat.c | 4
arch/sh/tools/mach-types | 1
include/asm-sh/magicpanelr2.h | 131 ++++
9 files changed, 1554 insertions(+)
diff -upNr linux-2.6.22-rc7-mod-CPU/arch/sh/boards/magicpanelr2/irq.c linux-2.6.22-rc7-mod/arch/sh/boards/magicpanelr2/irq.c
--- linux-2.6.22-rc7-mod-CPU/arch/sh/boards/magicpanelr2/irq.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.22-rc7-mod/arch/sh/boards/magicpanelr2/irq.c 2007-07-20 18:13:51.000000000 +0200
@@ -0,0 +1,80 @@
+/*
+ * linux/arch/sh/boards/magicpanel/irq.c
+ *
+ * Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ * Magic Panel Release 2 board specific irq setup
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/magicpanelr2.h>
+
+static struct ipr_data mpr2_ipr_map[] = {
+ /* IRQ, IPR-idx, shift, priority */
+ { 32, 2, 0, 13 }, /* IRQ0 CAN1 */
+ { 33, 2, 4, 13 }, /* IRQ1 CAN2 */
+ { 34, 2, 8, 13 }, /* IRQ2 CAN3 */
+ { 35, 2, 12, 6 }, /* IRQ3 SMSC9115 */
+ { 84, 7, 12, 14 }, /* PINTA (FLASH_READY, /PWR1, /PWR2) */
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __initmv init_mpr2_IRQ(void)
+{
+
+
+#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 1
+
+ ctrl_outw(ICR1_IRQ3_LOW | ICR1_IRQ2_LOW | ICR1_IRQ1_FALL | \
+ ICR1_IRQ0_FALL, INTC_ICR1);
+ ctrl_outw(0x0000, INTC_ICR2);
+
+ /* PINT4 and PINT5 are used as independent interrupt pins
+ * PINT4: CAN2_IRQ (low level sensitive)
+ * PINT5: CAN3_IRQ (low level sensitive)
+ */
+ /* set polarity of PINT interrupts to low level */
+ CLRBITS_OUTW(ICR2_PINT4S | ICR2_PINT5S, ICR2);
+ /* enable PINT interrupts */
+ SETBITS_OUTW(PINTER_PINT4E | PINTER_PINT5E, PINTER);
+
+#elif ((CONFIG_SH_MAGIC_PANEL_R2_VERSION >= 2) && \
+ (CONFIG_SH_MAGIC_PANEL_R2_VERSION <= 3))
+ /* IRQ0..3 are independent interrupt pins
+ * IRQ5: BUSY - touch screen - (falling edge sensitive)
+ * IRQ4: PENIRQ - touch screen - (rising edge sensitive)
+ * IRQ3: LAN_IRQ - Ethernet - (low level sensitive)
+ * IRQ2: CAN3_IRQ - CAN - (low level sensitive)
+ * IRQ1: CAN2_IRQ - CAN - (low level sensitive)
+ * IRQ0: CAN1_IRQ - CAN - (low level sensitive)
+ */
+ ctrl_outw(ICR1_IRQ5_FALL | ICR1_IRQ4_RISE | ICR1_IRQ3_LOW | \
+ ICR1_IRQ2_LOW | ICR1_IRQ1_LOW | ICR1_IRQ0_LOW, INTC_ICR1);
+
+
+ /* PINT4, PINT6 and PINT7 are used as independent interrupt pins
+ * PINT7: /PWR2 (low level sensitive)
+ * PINT6: /PWR1 (low level sensitive)
+ * PINT4: FLASH_READY (high level sensitive)
+ */
+ /* set polarity of PINT interrupts to low level */
+ CLRBITS_OUTW((ICR2_PINT7S | ICR2_PINT6S), INTC_ICR2);
+ /* set polarity of PINT interrupts to high level */
+ SETBITS_OUTW(ICR2_PINT4S, INTC_ICR2);
+ /* enable PINT interrupts */
+ ctrl_outw(PINTER_PINT7E | PINTER_PINT6E | PINTER_PINT4E, PINTER);
+#endif
+
+
+ make_ipr_irq(mpr2_ipr_map, ARRAY_SIZE(mpr2_ipr_map));
+}
+
+
diff -upNr linux-2.6.22-rc7-mod-CPU/arch/sh/boards/magicpanelr2/Makefile linux-2.6.22-rc7-mod/arch/sh/boards/magicpanelr2/Makefile
--- linux-2.6.22-rc7-mod-CPU/arch/sh/boards/magicpanelr2/Makefile 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.22-rc7-mod/arch/sh/boards/magicpanelr2/Makefile 2007-07-20 18:14:51.000000000 +0200
@@ -0,0 +1,5 @@
+#
+# Makefile for the Magic Panel specific parts
+#
+
+obj-y := setup.o irq.o
\ No newline at end of file
diff -upNr linux-2.6.22-rc7-mod-CPU/arch/sh/boards/magicpanelr2/setup.c linux-2.6.22-rc7-mod/arch/sh/boards/magicpanelr2/setup.c
--- linux-2.6.22-rc7-mod-CPU/arch/sh/boards/magicpanelr2/setup.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.22-rc7-mod/arch/sh/boards/magicpanelr2/setup.c 2007-07-20 16:30:40.000000000 +0200
@@ -0,0 +1,305 @@
+/*
+ * linux/arch/sh/boards/magicpanel/setup.c
+ *
+ * Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ * Magic Panel Release 2 board setup
+ *
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <asm/magicpanelr2.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+extern void init_mpr2_IRQ(void);
+
+static void __initmv setup_chip_select(void);
+static int __initmv ethernet_reset_finished(void);
+static void __initmv setup_port_multiplexing(void);
+
+#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL)
+
+/* Wait until reset finished. Timeout is 100ms. */
+static int __initmv ethernet_reset_finished(void)
+{
+ int i;
+
+ if (LAN9115_READY) {
+ return 1;
+ }
+
+ for (i = 0; i < 10; ++i) {
+ mdelay(10);
+ if (LAN9115_READY) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static int __initmv reset_ethernet(void)
+{
+ /* PMDR: LAN_RESET=on */
+ CLRBITS_OUTB(0x10, PORT_PMDR);
+
+ udelay(200);
+
+ /* PMDR: LAN_RESET=off */
+ SETBITS_OUTB(0x10, PORT_PMDR);
+}
+
+static void __initmv setup_chip_select(void)
+{
+ /* CS2: LAN (0x08000000 - 0x0bffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x36db0400, CS2BCR);
+ /* (SW:1.5 WR:3 HW:1.5), ext. wait */
+ ctrl_outl(0x000003c0, CS2WCR);
+
+ /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x00000200, CS4BCR);
+ /* (SW:1.5 WR:3 HW:1.5), ext. wait */
+ ctrl_outl(0x00100981, CS4WCR);
+
+ /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x00000200, CS5ABCR);
+ /* (SW:1.5 WR:3 HW:1.5), ext. wait */
+ ctrl_outl(0x00100981, CS5AWCR);
+
+ /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x00000200, CS5BBCR);
+ /* (SW:1.5 WR:3 HW:1.5), ext. wait */
+ ctrl_outl(0x00100981, CS5BWCR);
+
+ /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x00000200, CS6ABCR);
+ /* (SW:1.5 WR:3 HW:1.5), no ext. wait */
+ ctrl_outl(0x001009C1, CS6AWCR);
+}
+
+static void __initmv setup_port_multiplexing(void)
+{
+ /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
+ * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1);
+ */
+ ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
+
+ /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
+ * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0);
+ */
+ ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
+
+ /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
+ * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0;
+ */
+ ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
+
+ /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
+ * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0);
+ */
+ ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
+
+ /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
+ * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM;
+ */
+ ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
+
+ /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
+ * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc);
+ */
+ ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
+
+ /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
+ * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9);
+ */
+ ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
+
+ /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
+ * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR;
+ */
+ ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
+
+ /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
+ * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC;
+ */
+ ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
+
+ /* K7 (x); K6 (x); K5 (x); K4 (x);
+ * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
+ */
+ ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
+
+ /* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
+ * L3 TCK; L2 (x); L1 (x); L0 (x);
+ */
+ ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
+
+ /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED);
+ * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL);
+ * M1 CS5B(CAN3_CS); M0 GPI+(nc);
+ */
+ ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
+
+ /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
+ * LAN_RESET=off, BUZZER=off, LCD_BL=off
+ */
+ #if (CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2)
+ ctrl_outb(0x30, PORT_PMDR);
+ #elif (CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3)
+ ctrl_outb(0xF0, PORT_PMDR);
+ #else
+ #error Unknown revision of PLATFORM_MP_R2
+ #endif
+
+ /* P7 (x); P6 (x); P5 (x);
+ * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);
+ * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ)
+ */
+ ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
+ ctrl_outb(0x10, PORT_PPDR);
+
+ /* R7 A25; R6 A24; R5 A23; R4 A22;
+ * R3 A21; R2 A20; R1 A19; R0 A0;
+ */
+ ctrl_outw(0x0000, PORT_PRCR); /* 00 00 00 00 00 00 00 00 */
+
+ /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
+ * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK;
+ */
+ ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
+
+ /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
+ * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG)
+ */
+ ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
+
+ /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
+ * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK;
+ */
+ ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
+
+ /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
+ * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT);
+ */
+ ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
+}
+
+static void __initmv mpr2_setup(char **cmdline_p)
+{
+ __set_io_port_base(0xa0000000);
+
+ /* set Pin Select Register A:
+ * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
+ * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
+ */
+ ctrl_outw(0xAABC, PORT_PSELA);
+ /* set Pin Select Register B:
+ * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
+ * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved
+ */
+ ctrl_outw(0x3C00, PORT_PSELB);
+ /* set Pin Select Register C:
+ * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
+ */
+ ctrl_outw(0x0000, PORT_PSELC);
+ /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
+ * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
+ */
+ ctrl_outw(0x0000, PORT_PSELD);
+ /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
+ ctrl_outw(0x0101, PORT_UTRCTL);
+ /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
+ ctrl_outw(0xA5C0, PORT_UCLKCR_W);
+
+ setup_chip_select();
+
+ setup_port_multiplexing();
+
+ reset_ethernet();
+
+ printk(KERN_INFO "%s A.%i\n", get_system_type(),
+ CONFIG_SH_MAGIC_PANEL_R2_VERSION);
+
+ if (ethernet_reset_finished() == 0) {
+ printk(KERN_WARNING "Ethernet not ready\n");
+ }
+}
+
+static struct resource smc911x_resources[] = {
+ [0] = {
+ .start = 0xa8000000,
+ .end = 0xabffffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 35,
+ .end = 35,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc911x_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc911x_resources),
+ .resource = smc911x_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = heartbeat_bit_pos,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct platform_device *mpr2_devices[] __initdata = {
+ &heartbeat_device,
+ &smc911x_device,
+};
+
+static int __init mpr2_devices_setup(void)
+{
+ return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
+}
+__initcall(mpr2_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+
+struct sh_machine_vector mv_mpr2 __initmv = {
+ .mv_name = "Magic Panel Release 2",
+ .mv_setup = mpr2_setup,
+ .mv_nr_irqs = 112,
+ .mv_init_irq = init_mpr2_IRQ,
+};
+ALIAS_MV(mpr2)
diff -upNr linux-2.6.22-rc7-mod-CPU/arch/sh/configs/magicpanelr2_defconfig linux-2.6.22-rc7-mod/arch/sh/configs/magicpanelr2_defconfig
--- linux-2.6.22-rc7-mod-CPU/arch/sh/configs/magicpanelr2_defconfig 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.22-rc7-mod/arch/sh/configs/magicpanelr2_defconfig 2007-07-20 16:55:25.000000000 +0200
@@ -0,0 +1,1016 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc7
+# Fri Jul 20 16:54:11 2007
+#
+CONFIG_SUPERH=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System type
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+# CONFIG_SH_7722_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SOLUTION_ENGINE is not set
+# CONFIG_SH_7780_SOLUTION_ENGINE is not set
+# CONFIG_SH_7300_SOLUTION_ENGINE is not set
+# CONFIG_SH_7343_SOLUTION_ENGINE is not set
+# CONFIG_SH_73180_SOLUTION_ENGINE is not set
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_HP6XX is not set
+# CONFIG_SH_SATURN is not set
+# CONFIG_SH_DREAMCAST is not set
+# CONFIG_SH_MPC1211 is not set
+# CONFIG_SH_SH03 is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_HS7751RVOIP is not set
+# CONFIG_SH_7710VOIPGW is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_HIGHLANDER is not set
+# CONFIG_SH_EDOSK7705 is not set
+# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
+# CONFIG_SH_LBOX_RE2 is not set
+CONFIG_SH_MAGIC_PANEL_R2=y
+# CONFIG_SH_UNKNOWN is not set
+CONFIG_SH_MAGIC_PANEL_R2_VERSION=3
+
+#
+# Processor selection
+#
+CONFIG_CPU_SH3=y
+
+#
+# SH-2 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+
+#
+# SH-3 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+CONFIG_CPU_SUBTYPE_SH7720=y
+
+#
+# SH-4 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
+# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
+# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+
+#
+# SH4AL-DSP Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0C000000
+CONFIG_MEMORY_SIZE=0x03F00000
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_SH_FPU_EMU is not set
+CONFIG_SH_DSP=y
+CONFIG_SH_ADC=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
+CONFIG_CPU_HAS_SR_RB=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=24000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+CONFIG_SH_DMA_API=y
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=6
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+
+#
+# Companion Chips
+#
+# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options (EXPERIMENTAL)
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_ROCKETPORT is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=48
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_BIND34=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SLAB_LEAK=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_DEBUG_KOBJECT=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+CONFIG_SH_KGDB=y
+
+#
+# KGDB configuration options
+#
+# CONFIG_MORE_COMPILE_OPTIONS is not set
+# CONFIG_KGDB_NMI is not set
+CONFIG_KGDB_SYSRQ=y
+
+#
+# Serial port setup
+#
+CONFIG_KGDB_DEFPORT=1
+CONFIG_KGDB_DEFBAUD=115200
+CONFIG_KGDB_DEFPARITY_N=y
+# CONFIG_KGDB_DEFPARITY_E is not set
+# CONFIG_KGDB_DEFPARITY_O is not set
+CONFIG_KGDB_DEFBITS_8=y
+# CONFIG_KGDB_DEFBITS_7 is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff -upNr linux-2.6.22-rc7-mod-CPU/arch/sh/drivers/heartbeat.c linux-2.6.22-rc7-mod/arch/sh/drivers/heartbeat.c
--- linux-2.6.22-rc7-mod-CPU/arch/sh/drivers/heartbeat.c 2007-07-20 09:57:19.000000000 +0200
+++ linux-2.6.22-rc7-mod/arch/sh/drivers/heartbeat.c 2007-07-17 17:00:37.000000000 +0200
@@ -39,7 +39,11 @@ static void heartbeat_timer(unsigned lon
struct heartbeat_data *hd = (struct heartbeat_data *)data;
static unsigned bit = 0, up = 1;
+#if defined(CONFIG_SH_MAGIC_PANEL_R2)
+ ctrl_outb(~(1 << hd->bit_pos[bit]), (unsigned long)hd->base);
+#else
ctrl_outw(1 << hd->bit_pos[bit], (unsigned long)hd->base);
+#endif
bit += up;
if ((bit == 0) || (bit == ARRAY_SIZE(hd->bit_pos)-1))
up = -up;
diff -upNr linux-2.6.22-rc7-mod-CPU/arch/sh/Kconfig linux-2.6.22-rc7-mod/arch/sh/Kconfig
--- linux-2.6.22-rc7-mod-CPU/arch/sh/Kconfig 2007-07-19 16:24:31.000000000 +0200
+++ linux-2.6.22-rc7-mod/arch/sh/Kconfig 2007-07-20 16:12:37.000000000 +0200
@@ -269,6 +269,12 @@ config SH_LBOX_RE2
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+config SH_MAGIC_PANEL_R2
+ bool "Magic Panel R2"
+ select CPU_SUBTYPE_SH7720
+ help
+ Select Magic Panel R2 if configuring for Magic Panel R2.
+
config SH_UNKNOWN
bool "BareCPU"
help
@@ -283,6 +289,11 @@ config SH_UNKNOWN
endchoice
+config SH_MAGIC_PANEL_R2_VERSION
+ int SH_MAGIC_PANEL_R2_VERSION
+ depends on SH_MAGIC_PANEL_R2
+ default "3"
+
source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
source "arch/sh/boards/renesas/r7780rp/Kconfig"
diff -upNr linux-2.6.22-rc7-mod-CPU/arch/sh/Makefile linux-2.6.22-rc7-mod/arch/sh/Makefile
--- linux-2.6.22-rc7-mod-CPU/arch/sh/Makefile 2007-07-20 14:07:40.000000000 +0200
+++ linux-2.6.22-rc7-mod/arch/sh/Makefile 2007-07-20 16:43:15.000000000 +0200
@@ -113,6 +113,7 @@ machdir-$(CONFIG_SH_SHMIN) := shmin
machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) := se/7206
machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) := se/7619
machdir-$(CONFIG_SH_LBOX_RE2) := lboxre2
+machdir-$(CONFIG_SH_MAGIC_PANEL_R2) := magicpanelr2
machdir-$(CONFIG_SH_UNKNOWN) := unknown
incdir-y := $(notdir $(machdir-y))
diff -upNr linux-2.6.22-rc7-mod-CPU/arch/sh/tools/mach-types linux-2.6.22-rc7-mod/arch/sh/tools/mach-types
--- linux-2.6.22-rc7-mod-CPU/arch/sh/tools/mach-types 2007-07-20 17:48:40.000000000 +0200
+++ linux-2.6.22-rc7-mod/arch/sh/tools/mach-types 2007-07-20 17:48:50.000000000 +0200
@@ -34,3 +34,4 @@ R7785RP SH_R7785RP
TITAN SH_TITAN
SHMIN SH_SHMIN
7710VOIPGW SH_7710VOIPGW
+MAGICPANELR2 SH_MAGIC_PANEL_R2
diff -upNr linux-2.6.22-rc7-mod-CPU/include/asm-sh/magicpanelr2.h linux-2.6.22-rc7-mod/include/asm-sh/magicpanelr2.h
--- linux-2.6.22-rc7-mod-CPU/include/asm-sh/magicpanelr2.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.22-rc7-mod/include/asm-sh/magicpanelr2.h 2007-07-20 18:14:09.000000000 +0200
@@ -0,0 +1,131 @@
+/*
+ * include/asm-sh/magicpanelr2.h
+ *
+ * Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ * I/O addresses and bitmasks for Magic Panel Release 2 board
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_SH_MAGICPANELR2_H
+#define __ASM_SH_MAGICPANELR2_H
+
+#include <asm/port.h>
+
+#define __IO_PREFIX mpr2
+#include <asm/io_generic.h>
+
+
+#define SETBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) | mask, reg)
+#define SETBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) | mask, reg)
+#define SETBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) | mask, reg)
+#define CLRBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) & ~mask, reg)
+#define CLRBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) & ~mask, reg)
+#define CLRBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) & ~mask, reg)
+
+
+#define PA_LED PORT_PADR /* LED */
+
+
+/* BSC */
+#define CMNCR 0xA4FD0000UL
+#define CS0BCR 0xA4FD0004UL
+#define CS2BCR 0xA4FD0008UL
+#define CS3BCR 0xA4FD000CUL
+#define CS4BCR 0xA4FD0010UL
+#define CS5ABCR 0xA4FD0014UL
+#define CS5BBCR 0xA4FD0018UL
+#define CS6ABCR 0xA4FD001CUL
+#define CS6BBCR 0xA4FD0020UL
+#define CS0WCR 0xA4FD0024UL
+#define CS2WCR 0xA4FD0028UL
+#define CS3WCR 0xA4FD002CUL
+#define CS4WCR 0xA4FD0030UL
+#define CS5AWCR 0xA4FD0034UL
+#define CS5BWCR 0xA4FD0038UL
+#define CS6AWCR 0xA4FD003CUL
+#define CS6BWCR 0xA4FD0040UL
+
+
+#define ICR1_MAI 0x8000
+#define ICR1_IRQLVL 0x4000
+#define ICR1_BLMSK 0x2000
+#define ICR1_IRQ5 0x0C00
+#define ICR1_IRQ5_HIGH 0x0C00
+#define ICR1_IRQ5_LOW 0x0800
+#define ICR1_IRQ5_RISE 0x0400
+#define ICR1_IRQ5_FALL 0x0000
+#define ICR1_IRQ4 0x0300
+#define ICR1_IRQ4_HIGH 0x0300
+#define ICR1_IRQ4_LOW 0x0200
+#define ICR1_IRQ4_RISE 0x0100
+#define ICR1_IRQ4_FALL 0x0000
+#define ICR1_IRQ3 0x00C0
+#define ICR1_IRQ3_HIGH 0x00C0
+#define ICR1_IRQ3_LOW 0x0080
+#define ICR1_IRQ3_RISE 0x0040
+#define ICR1_IRQ3_FALL 0x0000
+#define ICR1_IRQ2 0x0030
+#define ICR1_IRQ2_HIGH 0x0030
+#define ICR1_IRQ2_LOW 0x0020
+#define ICR1_IRQ2_RISE 0x0010
+#define ICR1_IRQ2_FALL 0x0000
+#define ICR1_IRQ1 0x000C
+#define ICR1_IRQ1_HIGH 0x000C
+#define ICR1_IRQ1_LOW 0x0008
+#define ICR1_IRQ1_RISE 0x0004
+#define ICR1_IRQ1_FALL 0x0000
+#define ICR1_IRQ0 0x0003
+#define ICR1_IRQ0_HIGH 0x0003
+#define ICR1_IRQ0_LOW 0x0002
+#define ICR1_IRQ0_RISE 0x0001
+#define ICR1_IRQ0_FALL 0x0000
+#define ICR2_PINT15S 0x8000
+#define ICR2_PINT14S 0x4000
+#define ICR2_PINT13S 0x2000
+#define ICR2_PINT12S 0x1000
+#define ICR2_PINT11S 0x0800
+#define ICR2_PINT10S 0x0400
+#define ICR2_PINT9S 0x0200
+#define ICR2_PINT8S 0x0100
+#define ICR2_PINT7S 0x0080
+#define ICR2_PINT6S 0x0040
+#define ICR2_PINT5S 0x0020
+#define ICR2_PINT4S 0x0010
+#define ICR2_PINT3S 0x0008
+#define ICR2_PINT2S 0x0004
+#define ICR2_PINT1S 0x0002
+#define ICR2_PINT0S 0x0001
+
+
+#define PINTER ( 0xA4140014 )
+#define PINTER_PINT15E 0x8000
+#define PINTER_PINT14E 0x4000
+#define PINTER_PINT13E 0x2000
+#define PINTER_PINT12E 0x1000
+#define PINTER_PINT11E 0x0800
+#define PINTER_PINT10E 0x0400
+#define PINTER_PINT9E 0x0200
+#define PINTER_PINT8E 0x0100
+#define PINTER_PINT7E 0x0080
+#define PINTER_PINT6E 0x0040
+#define PINTER_PINT5E 0x0020
+#define PINTER_PINT4E 0x0010
+#define PINTER_PINT3E 0x0008
+#define PINTER_PINT2E 0x0004
+#define PINTER_PINT1E 0x0002
+#define PINTER_PINT0E 0x0001
+
+/*usb*/
+
+#define PORT_UTRCTL 0xA405012CUL
+#define PORT_UCLKCR_W 0xA40A0008UL
+
+#define INTC_ICR0 0xA414FEE0UL
+#define INTC_ICR1 0xA4140010UL
+#define INTC_ICR2 0xA4140012UL
+
+#endif /* __ASM_SH_MAGICPANELR2_H */
|
|
From: Paul M. <le...@li...> - 2007-07-23 08:03:51
|
On Mon, Jul 23, 2007 at 09:19:39AM +0200, Markus Brunner wrote:
> The board is currently under development and not publicly available. We
> thought that it is better to have a template than nothing to get the
> SH7720 running on another board. Maybe somebody with a Solution Engine
> Light (MS7720RP01) volunteers to write a BSP for this board as a
> template.
>
This is not a problem, it's never been a requirement that a board be mass
produced or even readily available. As long as there are folks testing
and keeping it maintained, we'll do our best to accomodate it.
> +static struct ipr_data mpr2_ipr_map[] = {
> + /* IRQ, IPR-idx, shift, priority */
> + { 32, 2, 0, 13 }, /* IRQ0 CAN1 */
> + { 33, 2, 4, 13 }, /* IRQ1 CAN2 */
> + { 34, 2, 8, 13 }, /* IRQ2 CAN3 */
> + { 35, 2, 12, 6 }, /* IRQ3 SMSC9115 */
> + { 84, 7, 12, 14 }, /* PINTA (FLASH_READY, /PWR1, /PWR2) */
> +};
> +
This will probably want to be re-rolled for INTC.
> + /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
> + * LAN_RESET=off, BUZZER=off, LCD_BL=off
> + */
> + #if (CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2)
> + ctrl_outb(0x30, PORT_PMDR);
> + #elif (CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3)
> + ctrl_outb(0xF0, PORT_PMDR);
> + #else
> + #error Unknown revision of PLATFORM_MP_R2
> + #endif
> +
Please keep pre-processor macros on the far left margin, not indented. If
you run your patch through scripts/checkpatch.pl it should complain about
this and give you an idea of what stylistic things you may want to
address before submission.
> +struct sh_machine_vector mv_mpr2 __initmv = {
> + .mv_name = "Magic Panel Release 2",
Note that with the recent machvec changes, mv_name is something we can
overload sh_mv with, so you might want to give it a more practical name
(ie, mpr2 or so), so you can place this on the kernel command line
without raising eyebrows.
Also as far as the various board revisions go, please throw these in a
board-specific Kconfig. Quite a few boards do this already, and it keeps
the upper-level Kconfig a bit tidier, thanks.
|
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X