Re: [Linuxsampler-devel] Gigedit: Positive Gain

[Ivan M. <iv...@ma...>]

Hi Christian

On 08/12/2019 09:51, Christian Schoenebeck wrote:
> Ivan, you could check your assumption and replace the defines for our own
> chunk names, namely LIST_TYPE_3LS and LIST_TYPE_RTIS in src/gig.h by something
> else.

I think Andreas is right. On modifying the chunk IDs for LIST_TYPE_3LS 
and LIST_TYPE_RTIS I get the same warning about the file being 
protected. I also now get the message: "This file has an irregular 
structure. One possible explanation is that it was written by an 
application other than the GigaStudio Editor. A full save will be 
required if you modify the file." but I think this is probably something 
to do with the new chunk ID values I chose. can

> Since Andreas assumes the crash to be a different issue. You might also just
> copy any original GSt .gig file from some commercial source and just replace
> some gain value with gigedit there, since that would mean less changes to the
> gig file than creating one from scratch.

I made two copies of a commercial instrument and set the gain to +6dB 
and +12dB respectively using gigedit. Both copies load correctly in 
GSEdit3 and GStudio3. The +6dB instrument is louder than the original, 
but the +12dB instrument seems to be the same volume as the original 
instrument. I'll do a more scientific test later and record the audio 
output.

I didn't use Save As in gigedit to create the copies above as 
instruments I created with it caused GStudio3 to crash.

> CU
> Christian

All the best,
Ivan