Re: [Linuxsampler-devel] lscp loader

[Nicola P. <nic...@gm...>]

I tried with debug-level=2 several times, but the problem didn't occurs.
To make it occurs, I had to compile linuxsampler with the following options:
./configure --enable-debug-level=2 --enable-refill-streams=2 
--enable-stream-size=320000 --enable-preload-samples=65536 
--enable-max-voices=200 --enable-max-streams=220
I found these options here: http://www.linuxsampler.org/debian.html
The differences between the two versions are:
# Preload Samples: 32768 - (the latter version has 65536)
# Streams to be refilled per Disk Thread Cycle: 4 - (the latter version 
has 2)
# Default Maximum Disk Streams: 90 - (the latter version has 220)
# Default Maximum Voices: 64 - (the latter version has 200)

I attached a .tar.gz that contains the lscp file, and three different 
logs where you can see that the loading stops before the end.


Il 13/04/2014 13:55, Christian Schoenebeck ha scritto:
> On Sunday 13 April 2014 14:38:17 Stjepan Horvat wrote:
>> is there a way to see what did sampler recive before it has send its data
>> for loading....?
> Sure! Recompile the server with increased debug level:
>
> 	./configure --enable-debug-level=2
> 	make
>
> Debug level 2 like suggested, should be enough for this. Then run the sampler
> (no need to install it):
>
> 	src/linuxsampler
>
> Then it should show a debug message for every LSCP command recognized by the
> LSCP server (see src/network/lscpserver.cpp).
>
> In the sampler's source code you see debug messages are placed like this:
>
> 	dmsg(2,("This is some value to debug: %d\n", value));
>
> The number in front indicates the minimum debug level for the debug message to
> be printed to the console.
>
> CU
> Christian
>
> ------------------------------------------------------------------------------
> Put Bad Developers to Shame
> Dominate Development with Jenkins Continuous Integration
> Continuously Automate Build, Test & Deployment
> Start a new project now. Try Jenkins in the cloud.
> http://p.sf.net/sfu/13600_Cloudbees
> _______________________________________________
> Linuxsampler-devel mailing list
> Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linuxsampler-devel


-- 
Nicola