Menu
▾
▴
linuxsampler-devel
|
From: Mark K. <mar...@ho...> - 2004-05-15 15:53:45
|
I hope someone will add the make -f step to the INSTALL file since it is a non-standard build practice. (Although becoming more standard.) Thanks, Mark >From: Vladimir Senkov <ha...@so...> >Reply-To: han...@im... >To: Garett Shulman <shu...@co...> >CC: Mark Knecht <mar...@ho...>, >lin...@li... >Subject: Re: [Linuxsampler-devel] make failure >Date: Fri, 14 May 2004 15:20:44 -0400 > >Guys, > >Please try: >1) taking the latest LS from cvs >2) make -f Makefile.cvs >3) ./configure >4) make >if it still fails, please send the logs here so it will be fixed . . . >I'll personally try to fix those things asap, but i need to have more info. >I can't reproduce these problems at this time. > >Regards, >Vladimir. > >Garett Shulman wrote: > >>I have found that I have to run ./configure then make then ./configure >>again then make to get ls build. also, I have to remove the lines with >>pedantic in a couple of the makefiles. >> >>Mark Knecht wrote: >> >>>bash-2.05b$ make >>>make all-recursive >>>make[1]: Entering directory `/home/mark/data/linuxsampler' >>>Making all in src >>>make[2]: Entering directory `/home/mark/data/linuxsampler/src' >>>Making all in network >>>make[3]: Entering directory `/home/mark/data/linuxsampler/src/network' >>>make[3]: *** No rule to make target `all'. Stop. >>>make[3]: Leaving directory `/home/mark/data/linuxsampler/src/network' >>>make[2]: *** [all-recursive] Error 1 >>>make[2]: Leaving directory `/home/mark/data/linuxsampler/src' >>>make[1]: *** [all-recursive] Error 1 >>>make[1]: Leaving directory `/home/mark/data/linuxsampler' >>>make: *** [all] Error 2 >>>bash-2.05b$ >>> >>>_________________________________________________________________ >>>FREE pop-up blocking with the new MSN Toolbar get it now! >>>http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/ >>> >>> >>> >>>------------------------------------------------------- >>>This SF.Net email is sponsored by: SourceForge.net Broadband >>>Sign-up now for SourceForge Broadband and get the fastest >>>6.0/768 connection for only $19.95/mo for the first 3 months! >>>http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click >>>_______________________________________________ >>>Linuxsampler-devel mailing list >>>Lin...@li... >>>https://lists.sourceforge.net/lists/listinfo/linuxsampler-devel >> >> >> >> >> >>------------------------------------------------------- >>This SF.Net email is sponsored by: SourceForge.net Broadband >>Sign-up now for SourceForge Broadband and get the fastest >>6.0/768 connection for only $19.95/mo for the first 3 months! >>http://ads.osdn.com/?ad_id%62&alloc_ida84&op=click >>_______________________________________________ >>Linuxsampler-devel mailing list >>Lin...@li... >>https://lists.sourceforge.net/lists/listinfo/linuxsampler-deve >>l > > _________________________________________________________________ Watch LIVE baseball games on your computer with MLB.TV, included with MSN Premium! http://join.msn.click-url.com/go/onm00200439ave/direct/01/ |
|
From: Mark K. <mar...@ho...> - 2004-05-15 15:57:04
|
Garett, None of my machines run telnet! Mark >From: Garett Shulman <shu...@co...> >To: Mark Knecht <mk...@co...>, >lin...@li... >Subject: Re: [Linuxsampler-devel] make failure >Date: Fri, 14 May 2004 19:15:03 -0600 > >Mark, Do: telnet localhost 8888 >You can pass commands to ls through the telnet session. Download the >command spec. from the download page and you should be off and running. >-Garett > >Mark Knecht wrote: > >>Vladimir Senkov wrote: >> >>>Guys, >>> >>>Please try: >>>1) taking the latest LS from cvs >>>2) make -f Makefile.cvs >>>3) ./configure >>>4) make >>>if it still fails, please send the logs here so it will be fixed . . . >>>I'll personally try to fix those things asap, but i need to have more >>>info. I can't reproduce these problems at this time. >>> >>>Regards, >>>Vladimir. >>> >> >>Ah! just like Rosegarden. I'll give it a try... >> >>...and it worked. Good >> >>However, I did read the INSTALL file and it didn't tell me that I needed >>to run the make -f Makefile.cvs step so (shaking my index finger) shame on >>you developers! ;-) >> >>Now, I'm trying to run it but there are no instructions that seem targeted >>to silly users like me. It just starts a LS server and sits there. I guess >>I need new instructions on how to use it since it's switched to the >>client/server approach. I see 3 linuxsampler --help processes in ps aux.) >>man linuxsampler returns nothing. >> >>linuxsampler --help returns no info and starts the program. >> >>There are no other executables in the src directory. >> >>The testcases directory has nothing that I understand. >> >>Where's the instructions guys? >> >>(Sorry to be so pushy, but I only have internet access a couple of hours >>out of the day. I'm trying to get this working in the next hour so that I >>can use it over the weekend. Thanks!) >> >>Cheers, >>Mark >> >> >> >> >> >> >> >>------------------------------------------------------- >>This SF.Net email is sponsored by: SourceForge.net Broadband >>Sign-up now for SourceForge Broadband and get the fastest >>6.0/768 connection for only $19.95/mo for the first 3 months! >>http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click >>_______________________________________________ >>Linuxsampler-devel mailing list >>Lin...@li... >>https://lists.sourceforge.net/lists/listinfo/linuxsampler-devel > > > > >------------------------------------------------------- >This SF.Net email is sponsored by: SourceForge.net Broadband >Sign-up now for SourceForge Broadband and get the fastest >6.0/768 connection for only $19.95/mo for the first 3 months! >http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click >_______________________________________________ >Linuxsampler-devel mailing list >Lin...@li... >https://lists.sourceforge.net/lists/listinfo/linuxsampler-devel _________________________________________________________________ Getting married? Find tips, tools and the latest trends at MSN Life Events. http://lifeevents.msn.com/category.aspx?cid=married |
|
From: Mark K. <mar...@ho...> - 2004-05-15 16:15:28
|
Currently I have very little time on the internet. If someone can pass me a quick example of how to load a gig file and set it's MIDI and audio outputs I would greatly appreciate it. A good topic for a HOWTO somewhere? Thanks, Mark >>Mark, Do: telnet localhost 8888 >>You can pass commands to ls through the telnet session. Download the >>command spec. from the download page and you should be off and running. >>-Garett >> _________________________________________________________________ Is your PC infected? Get a FREE online computer virus scan from McAfee® Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 |
|
From: Christian S. <chr...@ep...> - 2004-05-15 16:39:43
Attachments:
start.lscp
|
Es geschah am Samstag, 15. Mai 2004 17:56 als Mark Knecht schrieb: > Garett, > None of my machines run telnet! Misapprehension: You don't have to run a telnet deamon on your box. You only need a telnet client to type the LSCP commands manually or 'netcat' or something similar to send a LSCP script file to LS. Es geschah am Samstag, 15. Mai 2004 18:15 als Mark Knecht schrieb: > Currently I have very little time on the internet. If someone can pass me a > quick example of how to load a gig file and set it's MIDI and audio outputs > I would greatly appreciate it. See attached LSCP example script. > A good topic for a HOWTO somewhere? Not yet, but there will be howtos, documentations and even up to date install and readme files ;) when we are near the first release (perhaps in about 1 - 2 months). Just a bit patience! CU Christian |
|
From: Mark K. <mk...@co...> - 2004-05-15 16:52:32
|
Christian Schoenebeck wrote: > Es geschah am Samstag, 15. Mai 2004 17:56 als Mark Knecht schrieb: > >>Garett, >> None of my machines run telnet! > > > Misapprehension: You don't have to run a telnet deamon on your box. You only > need a telnet client to type the LSCP commands manually or 'netcat' or > something similar to send a LSCP script file to LS. Yes, I emerged telnetd and I can see the command and server windows talking, but I didn't understand the language they wanted. Your script will likely help. I'm in the office and will be going back to the house soon. I'll try things out later. Thanks! |
|
From: Garett S. <shu...@co...> - 2004-05-15 17:05:47
|
You DO NOT need telnetd. In fact, telnetd is a massive security problem. think of the ls server as the telnetd. Mark Knecht wrote: > Christian Schoenebeck wrote: > >> Es geschah am Samstag, 15. Mai 2004 17:56 als Mark Knecht schrieb: >> >>> Garett, >>> None of my machines run telnet! >> >> >> >> Misapprehension: You don't have to run a telnet deamon on your box. >> You only need a telnet client to type the LSCP commands manually or >> 'netcat' or something similar to send a LSCP script file to LS. > > > Yes, I emerged telnetd and I can see the command and server windows > talking, but I didn't understand the language they wanted. Your script > will likely help. I'm in the office and will be going back to the > house soon. I'll try things out later. > > Thanks! > > > ------------------------------------------------------- > This SF.Net email is sponsored by: SourceForge.net Broadband > Sign-up now for SourceForge Broadband and get the fastest > 6.0/768 connection for only $19.95/mo for the first 3 months! > http://ads.osdn.com/?ad_id=2562&alloc_id=6184&op=click > _______________________________________________ > Linuxsampler-devel mailing list > Lin...@li... > https://lists.sourceforge.net/lists/listinfo/linuxsampler-devel |
|
From: Mark K. <mk...@co...> - 2004-05-16 17:10:13
|
Christian Schoenebeck wrote: > ------------------------------------------------------------------------ > > ADD CHANNEL > SET CHANNEL AUDIO_OUTPUT_TYPE 0 ALSA > SET CHANNEL MIDI_INPUT_TYPE 0 ALSA > LOAD ENGINE gig 0 > LOAD INSTRUMENT /home/cuse/piano.gig 0 0 > SET CHANNEL VOLUME 0 1.4 > Just reporting that this script did not work for me. The second line reports that something like plughw:0,0 either doesn't exist or is invalid. I forget which and unfortunately don't have the machine with me right now to give you the exact message. I'm running LS (or trying to...) on a Compaq laptop using the snd-atiixp driver. alsaplayer and xine both work fine so this seems to be an LS problem. This is not the only Alsa problem I'm having on this machine though. Jack won't run recently on this laptop either. Typical Alsa problems for me. Say what you want about Windows but I mixed much of a CD yesterday on Pro Tools using this same machine. It was a pleasure. Don't really know how to proceed. Report a bug to the Alsa bug tracker I suppose? Take care, Mark |
Thanks for helping keep SourceForge clean.
X