Re: [Linuxptp-users] Error when configuring multiple slaves

[Ferenc F. <fe...@in...>]

Hello!

> Dear,
> 
> We want to use Linuxptp by configuring our device as follows:
> 
> Master(192.168.1.100)
> Slave1 (192.168.1.200)
> Slave2 (192.168.1.201)
> Slave3 (192.168.1.202)
> Ethernet connections between devices used hubs.
> 
> I used the following command:
> [Master]
> ./ptp4l -i eno1 -m --step_threshold=1
> ./phc2sys -a -r -r -m --step_threshold=1
> 
> [Slave1-3]
> ./ptp4l -i enp23s0f0 -s -m --step_threshold=1
> ./phc2sys -a -r -r -m --step_threshold=1
> 
> 
> Slave 1 and 2 are normally synchronized with Master's time.
> However, Slave3 is out of sync as "Waiting for ptp4l..." is output in
> the log of phc2sys.
> 
> Up to 2 slaves can be synchronized normally, but if you try to
> configure 3 or more slaves, synchronization will fail.
> 
> When configuring multiple slaves, are there any items that need to be
> set separately?

Not really AFAIK.

> 
> Any advice would be appreciated.
> 
> Regards,
> 
> 
> _______________________________________________
> Linuxptp-users mailing list
> Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linuxptp-users

Did you solved the issue?

Best,
Ferenc