Re: [Linuxptp-users] Software timestamping

[糸川直樹 / ITOKAWA，N. <nao...@hi...>]

Hello,


I could make ptp4l working on Raspberry Pi, then I'd like to write about it.

- Raspberry Pi 3 Model B
- write image of Raspbian Jessie with Pixel to microSD 
- installed linuxPTP v1.8
- installed ethtool 


*** Rebuilding kernel configuration ***

(1) Make directory of kernel

$ cd
$ mkdir kernel
$ cd kernel

(2) Download kernel

$ git clone --depth=1 https://github.com/raspberrypi/linux
$ sudo apt-get update
$ sudo apt-get install bc

(3) Configuration of kernal

$ cd linux
$ KERNEL=kernel7
$ make bcm2709_defconfig

(4) Configuration with menuconfig

$ sudo apt-get install libncurses5-dev
$ make menuconfig

Activate following three configuration with "menu-config"
    CONFIG_PPS
    CONFIG_NETWORK_PHY_TIMESTAMPING
    PTP_1588_CLOCK
Save configuration.

(5) Modify ethernet driver

Search "drivers/net/usb/smsc95xx.c", and edit it with vi editor.

Add a sentence "   .get_ts_info            = ethtool_op_get_ts_info,"
 to end of " smsc95xx_ethtool_ops = "

 static const struct ethtool_ops smsc95xx_ethtool_ops = {
         .get_link       = usbnet_get_link,
         .nway_reset     = usbnet_nway_reset,
         .get_drvinfo    = usbnet_get_drvinfo,
         .get_msglevel   = usbnet_get_msglevel,
         .set_msglevel   = usbnet_set_msglevel,
         .get_settings   = smsc95xx_get_settings,
         .set_settings   = smsc95xx_set_settings,
         .get_eeprom_len = smsc95xx_ethtool_get_eeprom_len,
         .get_eeprom     = smsc95xx_ethtool_get_eeprom,
         .set_eeprom     = smsc95xx_ethtool_set_eeprom,
         .get_regs_len   = smsc95xx_ethtool_getregslen,
         .get_regs       = smsc95xx_ethtool_getregs,
         .get_wol        = smsc95xx_ethtool_get_wol,
         .set_wol        = smsc95xx_ethtool_set_wol,
         .get_ts_info    = ethtool_op_get_ts_info,
 };


(6) Name extraversion of rebuilding kernel

$ cd ~/kernel/linux
$ vi Makefile

edit extraversion in Makefile such as;

EXTRAVERSION = ptprpi


(7) Building kernel

$ make -j4 zImage modules dtbs
$ sudo make modules_install
$ sudo cp arch/arm/boot/dts/*.dtb /boot/
$ sudo cp arch/arm/boot/dts/overlays/*.dtb* /boot/overlays/
$ sudo cp arch/arm/boot/dts/overlays/README /boot/overlays/
$ sudo scripts/mkknlimg arch/arm/boot/zImage /boot/$KERNEL.img

(8) Reboot in new kernel

$ sudo shutdown -r now

----------------------------

In my case, ptp4l on rpi has become working with these procedure.

Thank you.
Best Regards,

Naoki Itokawa