Re: [Linuxptp-users] [Linuxptp-devel] [announce] version 1.4 released

[Keller, J. E <jac...@in...>]

Excellent. Thanks Richard!

Regards,
Jake

On Fri, 2014-02-14 at 21:09 +0100, Richard Cochran wrote:
> Dear linuxptp users and developers,
> 
> I am happy to announce the version 1.4 of linuxptp. This release comes
> a good six months since the previous one. I have pushed out a v1.4 tag
> and released a tar ball on SF.
> 
> Once again, my thanks go out to the contributors, Delio, Jacob, Ken,
> Miroslav, and Stephan.
> 
> The short log is appended, below.
> 
> Enjoy,
> Richard
> 
> 
> Delio Brignoli (4):
>       Do not qualify announce messages with stepsRemoved >= 255
>       Set sync timeout only on port_synchronize()
>       Reset pdr_missing early in port_nrate_calculate(), implement ratio_valid flag
>       pmc: support retrieving neighborPropDelayThresh and asCapable using management interface
> 
> Jacob Keller (2):
>       missing: add onestep sync to missing.h
>       sk: update error message for Tx timestamp polling
> 
> Ken ICHIKAWA (1):
>       phc2sys: Fix lower bound value of update_rate
> 
> Miroslav Lichvar (23):
>       Use freeifaddrs() to free data from getifaddrs().
>       Fix port numbering in clock log messages.
>       Reset delay timer when switching to P2P delay mechanism.
>       Don't try to forward messages to faulty UDS port.
>       Ignore delay_resp messages from foreign masters.
>       Don't calculate delay with old master's sync time stamp.
>       Add reset function to servo.
>       Add clock sanity check.
>       Add random delay to announce timeout.
>       Drop tmtab module.
>       Make random() more random between machines.
>       Add modular filter interface.
>       Add median filter.
>       Add options to configure delay filter.
>       Adjust tick length with system clock.
>       Fix drift calculation in PI servo with large values.
>       Clarify c1, c2, c3 in negative path delay log message.
>       Change level of negative path delay messages to debug.
>       Print current frequency when PI servo is in unlocked state.
>       phc2sys: Mention that PPS output needs to be enabled without -s.
>       Clarify units used in clock stepping constants.
>       Set printf format attribute for print().
>       Fix new -Wformat warnings.
> 
> Richard Cochran (27):
>       Inhibit lost link recovery in P2P mode.
>       Enforce the absolute lower limit for the announce receipt timeout.
>       Rename the timer for sending sync messages.
>       Add a timer implementing the sync receive timeout.
>       Add a configuration file option for the sync receive timeout.
>       Announce master ambitions right away.
>       Add an optional extra check on sync and follow up message ordering.
>       Add a configuration file option for the extra sync-fup check.
>       Add missing semicolon to enumeration.
>       Merge the gPTP sync timeout branch.
>       Make the CFLAGS more robust.
>       Convert the hard coded UDS server path into a variable.
>       Introduce a configuration file option for the server's UDS address.
>       pmc: add a command line option to select the server's UDS address.
>       Extend the interface name length to allow any UDS address.
>       pmc: bring the man page more up to date.
>       Merge the configurable UDS server path branch.
>       Introduce the gmCapable flag for use with 802.1AS clocks.
>       Inhibit sync messages from unwilling 802.1AS ports.
>       Add a configuration file option for the 802.1AS gmCapable flag.
>       Merge Miroslav's random PTP timeout branch.
>       clock: add missing call to clockcheck_destroy.
>       Fix filter allocation failure on the UDS port.
>       Simplify the text of the driver support matrix in the readme file.
>       uds: take the interface data off the stack.
>       uds: disable the accidentally enabled announce timer.
>       Version 1.4
> 
> Stephan Gatzka (2):
>       Make udp_physical_addr() and udp_protocol_addr() static.
>       Make functions and structs dealing with string literals const correct.
> 
> 
> ------------------------------------------------------------------------------
> Android apps run on BlackBerry 10
> Introducing the new BlackBerry 10.2.1 Runtime for Android apps.
> Now with support for Jelly Bean, Bluetooth, Mapview and more.
> Get your Android app in front of a whole new audience.  Start now.
> http://pubads.g.doubleclick.net/gampad/clk?id=124407151&iu=/4140/ostg.clktrk
> _______________________________________________
> Linuxptp-devel mailing list
> Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linuxptp-devel