Re: [linuxdc-dev] Just joined

[Michael R. <mro...@fu...>]

It's a proprietary pinout cable and is connected through a destroyed 
modem.  Basically Kiyoshi tore the PCB off of the modem connector and 
soldered this proprietary cable to all of the Dreamcast Parallel port 
pins on the connector.  He then ran the cable into a PLL that used 
programmable logic to convert the Dreamcast parallel port to an IDE bus.

Michael Robinson
mro...@fu...
www.fuzzymuzzle.com

Mike Frysinger wrote:

>On Friday 25 June 2004 12:42 pm, Michael Robinson wrote:
>  
>
>>I just joined the LinuxDC mailing list and wondered if you guys needed
>>any help doing stuff or if you wanted me to work on anything.
>>    
>>
>
>http://www.fuzzymuzzle.com/Kiyoshi/Images/p0206n002.jpg
>
>anyone know if that connector going into the side of the dreamcast just:
>(1) destroyed modem with connector port intact
>(2) 1 25x2 pin head soldered onto the otherside of the connector in (1)
>(3) a 50 pin scsi cable
>-mike
>
>
>-------------------------------------------------------
>This SF.Net email sponsored by Black Hat Briefings & Training.
>Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
>digital self defense, top technical experts, no vendor pitches, 
>unmatched networking opportunities. Visit www.blackhat.com
>_______________________________________________
>Linuxdc-dev mailing list
>Lin...@li...
>https://lists.sourceforge.net/lists/listinfo/linuxdc-dev
>
>
>
>  
>