Menu
▾
▴
Re: Hardware problems on booting
|
From: vineesh k. <vi...@hc...> - 2004-12-01 05:22:14
|
My configuration is
OS :Redhat Linux 9.0
kernel: 2.4.22-backstreet-ruby
patch used:bruby-2.4.22-20031111.diff
Graphics cards: SiS650/651/M650/740 AGP(On borad)
:ATI Technologies Inc 3D Rage LT Pro(PCI)
My dmesg shows:
Linux version 2.4.22-backstreet-ruby (ro...@vi...) (gcc
version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #13 SMP Tue Nov 30
11:24:18 IST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017bf0000 (usable)
BIOS-e820: 0000000017bf0000 - 0000000017bf8000 (ACPI data)
BIOS-e820: 0000000017bf8000 - 0000000017c00000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
379MB LOWMEM available.
found SMP MP-table at 000fba70
hm, page 000fb000 reserved twice.
hm, page 000fc000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 000f7000 reserved twice.
On node 0 totalpages: 97264
zone(0): 4096 pages.
zone(1): 93168 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: GIGABYTE Product ID: 8SMML APIC at: 0xFEE00000
Processor #0 Pentium 4(tm) APIC version 20
I/O APIC #2 Version 21 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 1
Kernel command line: ro root=/dev/hda9 dumbcon=2 3
Initializing CPU#0
Detected 1715.305 MHz processor.
Console: colour VGA+ 80x25 vc:1-16
Calibrating delay loop... 3420.97 BogoMIPS
Memory: 381340k/389056k available (1894k kernel code, 7328k reserved,
654k data, 132k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rg...@at...)
mtrr: detected mtrr type: Intel
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
CPU: Common caps: 3febfbff 00000000 00000000 00000000
CPU0: Intel(R) Celeron(R) CPU 1.70GHz stepping 03
per-CPU timeslice cutoff: 365.75 usecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Error: only one processor found.
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-9, 2-10, 2-11, 2-19, 2-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178015
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0015
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to lin...@vg...
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 71
0d 001 01 0 0 0 0 0 1 1 79
0e 001 01 0 0 0 0 0 1 1 81
0f 001 01 0 0 0 0 0 1 1 89
10 001 01 1 1 0 1 0 1 1 91
11 001 01 1 1 0 1 0 1 1 99
12 001 01 1 1 0 1 0 1 1 A1
13 000 00 1 0 0 0 0 0 0 00
14 001 01 1 1 0 1 0 1 1 A9
15 001 01 1 1 0 1 0 1 1 B1
16 000 00 1 0 0 0 0 0 0 00
17 001 01 1 1 0 1 0 1 1 B9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ20 -> 0:20
IRQ21 -> 0:21
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1715.3110 MHz.
..... host bus clock speed is 100.9004 MHz.
cpu: 0, clocks: 1009004, slice: 504502
CPU0<T0:1008992,T1:504480,D:10,S:504502,C:1009004>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xfdb21, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
PCI->APIC IRQ transform: (B0,I2,P3) -> 20
PCI->APIC IRQ transform: (B0,I2,P0) -> 18
PCI->APIC IRQ transform: (B0,I2,P2) -> 21
PCI->APIC IRQ transform: (B0,I9,P0) -> 17
PCI->APIC IRQ transform: (B0,I16,P0) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Installing knfsd (copyright (C) 1996 ok...@mo...).
Console: mono dummy device 80x25 vc:17-17
Console: mono dummy device 80x25 vc:18-18
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 317M
agpgart: Detected SiS 650 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] AGP 0.99 on SiS @ 0xe0000000 64MB
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm] AGP 0.99 on SiS @ 0xe0000000 64MB
[drm] Initialized i810 1.2.0 20010920 on minor 2
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
hda: Maxtor 6E040L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/usb-uhci.c: $Revision: 1.275 $ time 11:24:24 Nov 30 2004
host/usb-uhci.c: High bandwidth mode enabled
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
host/usb-ohci.c: USB OHCI at membase 0xd8816000, IRQ 20
host/usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] USB 1.0
Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-ohci.c: USB OHCI at membase 0xd8818000, IRQ 18
host/usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] USB 1.0
Controller (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vo...@su...>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
keyboard.c [AT Set 2 keyboard] vc:1-16
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 132k freed
hub.c: new USB device 00:02.2-1, assigned address 2
input: USB HID v1.00 Mouse [1241:1166] on usb-00:02.2-1
hub.c: new USB device 00:02.3-1, assigned address 2
usb_control/bulk_msg: timeout
host/usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: new USB device 00:02.3-1, assigned address 3
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal
Adding Swap: 522072k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb_control/bulk_msg: timeout
host/usb-ohci.c: unlink URB timeout
usb.c: USB device not accepting new address=3 (error=-110)
======================================================================
My lspci shows:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 650 Host (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual
PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
00:02.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
Controller (rev 07)
00:02.3 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
Controller (rev 07)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev
d0)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS]
SiS7012 PCI Audio Accelerator (rev a0)
00:09.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro
(rev dc)
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
SiS650/651/M650/740 PCI/AGP VGA Display Adapter
=================================================================================
cat /proc/bus/input/devices shows
I: Bus=0011 Vendor=0002 Product=0005 Version=0051
N: Name="ImPS/2 Logitech Wheel Mouse"
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0 event0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
I: Bus=0011 Vendor=0001 Product=0002 Version=ab02
N: Name="AT Set 2 keyboard"
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event1
B: EV=120003
B: KEY=4 2000000 8061f9 fbc9d621 efdfffdf ffefffff ffffffff fffffffe
B: LED=7
I: Bus=0003 Vendor=1241 Product=1166 Version=0200
N: Name="1241:1166"
P: Phys=usb-00:02.2-1/input0
H: Handlers=mouse1 event2
B: EV=7
B: KEY=1f0000 0 0 0 0 0 0 0 0
B: REL=103
===================================================================================
cat /proc/bus/usb/devices shows
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=d8818000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=118/900 us (13%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=d8816000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=1241 ProdID=1166 Rev= 2.00
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
On Tue, 2004-11-30 at 23:38, celso Silva wrote:
> Hi vineesh,
> Em Ter 30 Nov 2004 06:34, vineesh kumar escreveu:
> > Hi all,
> > i am a newbie to the list and also multi head booting. I am trying to
> > configure multihead booting on RH Linux 9.0. With an SiS integrated
> > graphics card and ATI radeon LT pro PCI card. I compile the ruby patched
> > kernel.And everything is ok. The problem is that when the kernel loads
> > the usb mouse gets disabled and usb keyboard too. I am using a Silitek
> > keybiard.and an optical mouse.But i can start X server on the secon
> > monitor. After that the system hangsup.
> > I tested the same kernel with some other system, a p4 with original
> > intel MB. There is no problem with the kernel now but there is some
> > hradware incompatibilities so i can't start the x on the second monitor.
> >
> > wat may b the problm
> > thanks in advance
> > vineesh
> >
>
> I don't have much knowledge to write in this list. But, maybe I can share my
> little experience with you if you send more information. Aivils helped me
> some time ago and everything I know is from his 'obsolete site
> (http://startx.times.lv/)'. I stopped in the time.
> This is my configuration:
> bruby-2.4.25-20040219.diff.bz2
> Motherboard: PCCHIPS 701
> video (AGP-onBoard): Sis300/305
> video (PCI): Stealth 3D 2000 PRO(S3-Virge) or Nvidia Riva TNT2
> KDM.
> Slackware 9.1
> This is my 'lspci':
> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 635 Host (rev 11)
> 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual
> PCI-to-PCI bridge (AGP)
> 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
> 00:02.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
> Controller (rev 07)
> 00:02.3 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
> Controller (rev 07)
> 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
> 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012
> PCI Audio Accelerator (rev a0)
> 00:03.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100
> Ethernet (rev 90)
> 00:0b.0 VGA compatible controller: S3 Inc. ViRGE/DX or /GX (rev 01)
> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] SiS300/305
> PCI/AGP VGA Display Adapter (rev 90)
>
> I didn't test this a lot, but It's showing me two heads (or console).
> If you are interested about others configuration email me.
>
> Sorry for my English,
>
> Att.
> Celso.Silva
>
>
>
>
>
>
>
|
