Re: Independ multiple users on G550

[Svetoslav S. <sv...@gm...>]

> 
> >> > this way  you can configure VT- keyboard mapping
> >> > & consistent evdev[n] mouse[n] devices
> >> > /* although udev is probably much better for the evdev & mice */
> >> >
> >> I'll look at this someday.  Do I need modules for this to work?
> >
> >good question
> 
> When "foo" device detected, then kernel call /etc/hotplug/input.agent
> Troubles are non-existing file systems in bootime, /proc and so on.
> So all Your devices detected in boot time and input.agent has read-only
> root filesytem and nothing more. This is main reason to use input device
> drivers modular. Instead modules exists input.rc scripts, which do same.
> 
> >how do you setup the fb mode?
> >i'm still using a single monitor with switch
> >@ 640x480, and fbset doesn't seem to work
> 
> video=matroxfb:800x600@75
> 
> for 1st head. Also i use fbset. Modular fbcon donot resize after
> fbset resize.
> 

nice but
------- modpreobe.conf -------------
options matroxfb_base mem=16 vesa=0x117
options matroxfb_crtc2 mem=16
---------------------------------------

matroxfb: Matrox G550 detected
matroxfb: MTRR's turned on
matroxfb: 1024x768x16bpp (virtual: 1024x65536)
matroxfb: framebuffer at 0xD8000000, mapped to 0xe0ca9000, size 16777216
fb0: MATROX frame buffer device
fb0: initializing hardware
matroxfb_crtc2: secondary head of fb0 was registered as fb1
fbcon_startup: mode:   MATROX
fbcon_startup: visual: 2
fbcon_startup: res:    1024x0-16
Console: switching to colour MATROX 128x25 vc:1-16
fbcon_startup: mode:   MATROX DH
fbcon_startup: visual: 2
fbcon_startup: res:    640x480-32
Console: Colour MATROX DH 80x30 vc:17-32

do you see  the nice "fbcon_startup: res:    1024x0-16"
both heads are off after that
/* everything quite normal before loading fbcon */

and 
---------------------------------------
[root@tux root]# fbset -fb /dev/fb0 1024x768-70
[root@tux root]# fbset -fb /dev/fb0

mode "1024x0-1486"
    # D: 74.996 MHz, H: 56.473 kHz, V: 1486.134 Hz
    geometry 1024 0 1024 0 8
    timings 13334 144 24 29 3 136 6
    accel true
    rgba 8/0,8/0,8/0,0/0
endmode

[root@tux root]# fbset -fb /dev/fb0 800x600-70
[root@tux root]# fbset -fb /dev/fb0

mode "800x0-1237"
    # D: 44.899 MHz, H: 44.543 kHz, V: 1237.308 Hz
    geometry 800 0 832 0 8
    timings 22272 40 24 15 9 144 12
    hsync high
    accel true
    rgba 8/0,8/0,8/0,0/0
endmode
-------------------------------------------------

any clues, ideas ?


svetljo

PS.
the latest cvs works OK modular,
at least in default mode 640x480

-- 
HoHoHo! Seid Ihr auch alle schön brav gewesen?

GMX Weihnachts-Special: Die 1. Adresse für Weihnachts-
männer und -frauen! http://www.gmx.net/de/cgi/specialmail

+++ GMX - die erste Adresse für Mail, Message, More! +++