Re: Local Multi-User X (?) problems

[Kjetil K. <kj...@kj...>]

Hi there! 

Good news! 

On Thursday 30 October 2003 12:48, Svetoslav Slavtchev wrote:

> > > > BTW, /proc/bus/usb/devices does not exist on my system,
>
> probably your init script doesn't like
> built in support for usb,
> this is the case for mandrake as well
> if usb is built in the kernel, not as modules,
> service usb doesn't start -- it doesn't mount
> usbfs and there might be some issues with
> certain usb drivers
> you probably have to mount it yourself then

Helge's advice worked well! Here is my /proc/bus/usb/devices:

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=d000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=186/900 us (21%), #Int=  2, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=c00e Rev=11.10
S:  Manufacturer=Logitech
S:  Product=USB-PS/2 Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=10ms
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=09da ProdID=0006 Rev= 0.01
S:  Manufacturer=A4Tech
S:  Product=USB Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=hid
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=10ms

But now, I've bought the USB to PS/2 converter, so this will change 
soon, I guess!

> please check if putting
> Option "DRI" "false"
> for your second card works OK
> with DRI activated for the first card
> and drop a line
> (i'll add it to the howto if it works)

It works! :-) 

The log says:
(II) MGA(0): [DRI] installation complete

Cool, eh?

Cheers,

Kjetil
-- 
Kjetil Kjernsmo
Astrophysicist/IT Consultant/Skeptic/Ski-orienteer/Orienteer/Mountaineer
kj...@kj...  web...@sk...  ed...@le...
Homepage: http://www.kjetil.kjernsmo.net/        OpenPGP KeyID: 6A6A0BBC