Menu
▾
▴
Re: CVS updates/VGA mode setting
|
From: Christoph H. <hc...@ca...> - 2000-08-27 18:38:16
|
> The CVS has been brought into sync with test7.
Not completly - you missed some updates. Here's the diff:
Christoph
Index: linux/arch/sparc64/config.in
===================================================================
RCS file: /cvsroot/linuxconsole/ruby/linux/arch/sparc64/config.in,v
retrieving revision 1.5
diff -u -r1.5 config.in
--- linux/arch/sparc64/config.in 2000/08/11 00:16:02 1.5
+++ linux/arch/sparc64/config.in 2000/08/27 18:32:45
@@ -81,24 +81,29 @@
bool 'Normal floppy disk support' CONFIG_BLK_DEV_FD
-bool 'Multiple devices driver support' CONFIG_BLK_DEV_MD
-if [ "$CONFIG_BLK_DEV_MD" = "y" ]; then
- tristate ' Linear (append) mode' CONFIG_MD_LINEAR
- tristate ' RAID-0 (striping) mode' CONFIG_MD_STRIPED
-# tristate ' RAID-1 (mirroring) mode' CONFIG_MD_MIRRORING
-# tristate ' RAID-4/RAID-5 mode' CONFIG_MD_RAID5
-fi
+tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
+dep_tristate 'Network block device support' CONFIG_BLK_DEV_NBD $CONFIG_NET
+
+#tristate 'Logical volume manager (LVM) support' CONFIG_BLK_DEV_LVM N
+#if [ "$CONFIG_BLK_DEV_LVM" != "n" ]; then
+# bool ' LVM information in proc filesystem' CONFIG_LVM_PROC_FS Y
+#fi
+
+tristate 'Multiple devices driver support' CONFIG_BLK_DEV_MD
+dep_tristate ' Linear (append) mode' CONFIG_MD_LINEAR $CONFIG_BLK_DEV_MD
+dep_tristate ' RAID-0 (striping) mode' CONFIG_MD_RAID0 $CONFIG_BLK_DEV_MD
+dep_tristate ' RAID-1 (mirroring) mode' CONFIG_MD_RAID1 $CONFIG_BLK_DEV_MD
+#dep_tristate ' RAID-4/RAID-5 mode' CONFIG_MD_RAID5 $CONFIG_BLK_DEV_MD
+#if [ "$CONFIG_MD_LINEAR" = "y" -o "$CONFIG_MD_RAID0" = "y" -o "$CONFIG_MD_RAID1" = "y" -o "$CONFIG_MD_RAID5" = "y" ]; then
+# bool ' Boot support' CONFIG_MD_BOOT
+# bool ' Auto Detect support' CONFIG_AUTODETECT_RAID
+#fi
tristate 'RAM disk support' CONFIG_BLK_DEV_RAM
if [ "$CONFIG_BLK_DEV_RAM" = "y" -o "$CONFIG_BLK_DEV_RAM" = "m" ]; then
int ' Default RAM disk size' CONFIG_BLK_DEV_RAM_SIZE 4096
fi
-if [ "$CONFIG_BLK_DEV_RAM" = "y" ]; then
- bool ' Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD
-fi
-
-tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
-tristate 'Network block device support' CONFIG_BLK_DEV_NBD
+dep_bool ' Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD $CONFIG_BLK_DEV_RAM
endmenu
@@ -226,9 +231,10 @@
if [ "$CONFIG_NETDEVICES" = "y" ]; then
tristate ' Dummy net driver support' CONFIG_DUMMY
tristate ' Bonding driver support' CONFIG_BONDING
+ tristate ' Universal TUN/TAP device driver support' CONFIG_TUN
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
if [ "$CONFIG_NETLINK" = "y" ]; then
- tristate ' Ethertap network tap (EXPERIMENTAL)' CONFIG_ETHERTAP
+ tristate ' Ethertap network tap (OBSOLETE)' CONFIG_ETHERTAP
fi
fi
tristate ' PPP (point-to-point) support' CONFIG_PPP
Index: linux/drivers/Makefile
===================================================================
RCS file: /cvsroot/linuxconsole/ruby/linux/drivers/Makefile,v
retrieving revision 1.4
diff -u -r1.4 Makefile
--- linux/drivers/Makefile 2000/08/11 00:16:02 1.4
+++ linux/drivers/Makefile 2000/08/27 18:32:45
@@ -7,7 +7,7 @@
#
# Note 2! The CFLAGS definitions are now in the main makefile.
-SUB_DIRS := block char net parport sound misc
+SUB_DIRS := block char net parport sound misc media
MOD_SUB_DIRS := $(SUB_DIRS)
ALL_SUB_DIRS := $(SUB_DIRS) pci sgi ide scsi sbus cdrom isdn pnp i2o \
ieee1394 macintosh video dio zorro fc4 \
Index: linux/drivers/char/Config.in
===================================================================
RCS file: /cvsroot/linuxconsole/ruby/linux/drivers/char/Config.in,v
retrieving revision 1.13
diff -u -r1.13 Config.in
--- linux/drivers/char/Config.in 2000/08/11 00:16:02 1.13
+++ linux/drivers/char/Config.in 2000/08/27 18:32:46
@@ -6,10 +6,10 @@
bool 'Virtual terminal' CONFIG_VT
if [ "$CONFIG_VT" = "y" ]; then
- define_bool CONFIG_VT_EXTENDED y
- define_bool CONFIG_INPUT y
+ define_bool CONFIG_VT_EXTENDED y
+ define_bool CONFIG_INPUT y
bool ' Support for console on virtual terminal' CONFIG_VT_CONSOLE
-# if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
# bool ' Extended terminal emulation (EXPERIMENTAL)' CONFIG_VT_EXTENDED
# bool ' DEC ReGIS graphics support (EXPERIMENTAL)' CONFIG_VT_DEC_REGIS
# bool ' DEC Sixel graphics support (EXPERIMENTAL)' CONFIG_VT_DEC_SIXEL
@@ -18,8 +18,7 @@
# bool ' ISO6429 bidirectional support (EXPERIMENTAL)' CONFIG_VT_BDSM
# fi
fi
-
-tristate 'Standard/generic (dumb) serial support' CONFIG_SERIAL
+tristate 'Standard/generic (8250/16550 and compatible UARTs) serial support' CONFIG_SERIAL
if [ "$CONFIG_SERIAL" = "y" ]; then
bool ' Support for console on serial port' CONFIG_SERIAL_CONSOLE
if [ "$CONFIG_ARCH_ACORN" = "y" ]; then
@@ -71,6 +70,15 @@
tristate ' Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
fi
fi
+if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
+ bool 'DC21285 serial port support' CONFIG_SERIAL_21285
+ if [ "$CONFIG_SERIAL_21285" = "y" ]; then
+ if [ "$CONFIG_OBSOLETE" = "y" ]; then
+ bool ' Use /dev/ttyS0 device (OBSOLETE)' CONFIG_SERIAL_21285_OLD
+ fi
+ bool ' Console on DC21285 serial port' CONFIG_SERIAL_21285_CONSOLE
+ fi
+fi
bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
@@ -113,8 +121,9 @@
tristate ' Software Watchdog' CONFIG_SOFT_WATCHDOG
tristate ' Berkshire Products PC Watchdog' CONFIG_PCWATCHDOG
tristate ' Acquire SBC Watchdog Timer' CONFIG_ACQUIRE_WDT
- tristate ' SBC-60XX Watchdog Timer' CONFIG_60XX_WDT
+ tristate ' SBC-60XX Watchdog Timer' CONFIG_60XX_WDT
tristate ' Mixcom Watchdog' CONFIG_MIXCOMWD
+ tristate ' Intel i810 TCO timer / Watchdog' CONFIG_I810_TCO
if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then
tristate ' DC21285 watchdog' CONFIG_21285_WATCHDOG
if [ "$CONFIG_ARCH_NETWINDER" = "y" ]; then
@@ -143,98 +152,7 @@
bool 'Tadpole ANA H8 Support' CONFIG_H8
fi
-mainmenu_option next_comment
-comment 'Video For Linux'
-
-tristate 'Video For Linux' CONFIG_VIDEO_DEV
-if [ "$CONFIG_VIDEO_DEV" != "n" ]; then
- bool ' V4L information in proc filesystem' CONFIG_VIDEO_PROC_FS Y
- dep_tristate ' I2C on parallel port' CONFIG_I2C_PARPORT $CONFIG_PARPORT $CONFIG_I2C
- comment 'Radio Adapters'
- dep_tristate ' ADS Cadet AM/FM Tuner' CONFIG_RADIO_CADET $CONFIG_VIDEO_DEV
- dep_tristate ' AIMSlab RadioTrack (aka RadioReveal) support' CONFIG_RADIO_RTRACK $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_RTRACK" = "y" ]; then
- hex ' RadioTrack i/o port (0x20f or 0x30f)' CONFIG_RADIO_RTRACK_PORT 20f
- fi
- dep_tristate ' AIMSlab RadioTrack II support' CONFIG_RADIO_RTRACK2 $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_RTRACK2" = "y" ]; then
- hex ' RadioTrack II i/o port (0x20c or 0x30c)' CONFIG_RADIO_RTRACK2_PORT 30c
- fi
- dep_tristate ' Aztech/Packard Bell Radio' CONFIG_RADIO_AZTECH $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_AZTECH" = "y" ]; then
- hex ' Aztech/Packard Bell I/O port (0x350 or 0x358)' CONFIG_RADIO_AZTECH_PORT 350
- fi
- dep_tristate ' GemTek Radio Card support' CONFIG_RADIO_GEMTEK $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_GEMTEK" = "y" ]; then
- hex ' GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)' CONFIG_RADIO_GEMTEK_PORT 34c
- fi
- dep_tristate ' Miro PCM20 Radio' CONFIG_RADIO_MIROPCM20 $CONFIG_VIDEO_DEV
- dep_tristate ' SF16FMI Radio' CONFIG_RADIO_SF16FMI $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_SF16FMI" = "y" ]; then
- hex ' SF16FMI I/O port (0x284 or 0x384)' CONFIG_RADIO_SF16FMI_PORT 284
- fi
- dep_tristate ' TerraTec ActiveRadio ISA Standalone' CONFIG_RADIO_TERRATEC $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_TERRATEC" = "y" ]; then
- hex ' Terratec i/o port (normally 0x590)' CONFIG_RADIO_TERRATEC_PORT 590
- fi
- dep_tristate ' Trust FM radio card' CONFIG_RADIO_TRUST $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_TRUST" = "y" ]; then
- hex ' Trust i/o port (usually 0x350 or 0x358)' CONFIG_RADIO_TRUST_PORT 350
- fi
- dep_tristate ' Typhoon Radio (a.k.a. EcoRadio)' CONFIG_RADIO_TYPHOON $CONFIG_VIDEO_DEV
- if [ "$CONFIG_PROC_FS" = "y" ]; then
- if [ "$CONFIG_RADIO_TYPHOON" != "n" ]; then
- bool ' Support for /proc/radio-typhoon' CONFIG_RADIO_TYPHOON_PROC_FS
- fi
- fi
- if [ "$CONFIG_RADIO_TYPHOON" = "y" ]; then
- hex ' Typhoon I/O port (0x316 or 0x336)' CONFIG_RADIO_TYPHOON_PORT 316
- int ' Typhoon frequency set when muting the device (kHz)' CONFIG_RADIO_TYPHOON_MUTEFREQ 87500
- fi
- dep_tristate ' Zoltrix Radio' CONFIG_RADIO_ZOLTRIX $CONFIG_VIDEO_DEV
- if [ "$CONFIG_RADIO_ZOLTRIX" = "y" ]; then
- hex ' ZOLTRIX I/O port (0x20c or 0x30c)' CONFIG_RADIO_ZOLTRIX_PORT 20c
- fi
- comment 'Video Adapters'
- if [ "$CONFIG_I2C_ALGOBIT" = "y" -o "$CONFIG_I2C_ALGOBIT" = "m" ]; then
- dep_tristate ' BT848 Video For Linux' CONFIG_VIDEO_BT848 $CONFIG_VIDEO_DEV $CONFIG_PCI $CONFIG_I2C_ALGOBIT
- fi
- dep_tristate ' Mediavision Pro Movie Studio Video For Linux' CONFIG_VIDEO_PMS $CONFIG_VIDEO_DEV
- if [ "$CONFIG_ALL_PPC" = "y" ]; then
- dep_tristate ' PlanB Video-In on PowerMac' CONFIG_VIDEO_PLANB $CONFIG_VIDEO_DEV
- fi
- if [ "$CONFIG_PARPORT" != "n" ]; then
- dep_tristate ' Quickcam BW Video For Linux' CONFIG_VIDEO_BWQCAM $CONFIG_VIDEO_DEV $CONFIG_PARPORT
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- dep_tristate ' QuickCam Colour Video For Linux (EXPERIMENTAL)' CONFIG_VIDEO_CQCAM $CONFIG_VIDEO_DEV $CONFIG_PARPORT
- fi
- fi
- dep_tristate ' CPiA Video For Linux' CONFIG_VIDEO_CPIA $CONFIG_VIDEO_DEV
- if [ "$CONFIG_VIDEO_CPIA" != "n" ]; then
- if [ "CONFIG_PARPORT_1284" != "n" ]; then
- dep_tristate ' CPiA Parallel Port Lowlevel Support' CONFIG_VIDEO_CPIA_PP $CONFIG_VIDEO_CPIA $CONFIG_PARPORT
- fi
- if [ "$CONFIG_USB" != "n" ]; then
- dep_tristate ' CPiA USB Lowlevel Support' CONFIG_VIDEO_CPIA_USB $CONFIG_VIDEO_CPIA $CONFIG_USB
- fi
- fi
- dep_tristate ' SAA5249 Teletext processor' CONFIG_VIDEO_SAA5249 $CONFIG_VIDEO_DEV $CONFIG_I2C
- dep_tristate ' SAB3036 tuner' CONFIG_TUNER_3036 $CONFIG_VIDEO_DEV $CONFIG_I2C
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- if [ "$CONFIG_SGI" = "y" ]; then
- dep_tristate ' SGI Vino Video For Linux (EXPERIMENTAL)' CONFIG_VIDEO_VINO $CONFIG_VIDEO_DEV $CONFIG_SGI
- fi
- dep_tristate ' Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)' CONFIG_VIDEO_STRADIS $CONFIG_VIDEO_DEV $CONFIG_PCI
- fi
- dep_tristate ' Zoran ZR36057/36060 Video For Linux' CONFIG_VIDEO_ZORAN $CONFIG_VIDEO_DEV $CONFIG_PCI
- dep_tristate ' Include support for Iomega Buz' CONFIG_VIDEO_BUZ $CONFIG_VIDEO_ZORAN
- dep_tristate ' Zoran ZR36120/36125 Video For Linux' CONFIG_VIDEO_ZR36120 $CONFIG_VIDEO_DEV $CONFIG_PCI $CONFIG_I2C
-fi
-
-endmenu
-
tristate 'Double Talk PC internal speech card support' CONFIG_DTLK
-
tristate 'Siemens R3964 line discipline' CONFIG_R3964
tristate 'Applicom intelligent fieldbus card support' CONFIG_APPLICOM
Index: linux/drivers/char/Makefile
===================================================================
RCS file: /cvsroot/linuxconsole/ruby/linux/drivers/char/Makefile,v
retrieving revision 1.14
diff -u -r1.14 Makefile
--- linux/drivers/char/Makefile 2000/08/11 00:16:02 1.14
+++ linux/drivers/char/Makefile 2000/08/27 18:32:48
@@ -36,13 +36,9 @@
# All of the (potential) objects that export symbols.
# This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
-export-objs := vt.o i2c-old.o keyboard.o sysrq.o \
- misc.o pty.o random.o selection.o serial.o videodev.o \
- tty_io.o bttv-if.o cpia.o
+export-objs := vt.o keyboard.o sysrq.o misc.o pty.o \
+ random.o selection.o serial.o tty_io.o
-list-multi := bttv.o
-bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o
-
KEYMAP =defkeymap.o
CONSOLE =vt.o
SERIAL =serial.o
@@ -57,18 +53,15 @@
endif
ifeq ($(ARCH),arm)
-# we actually need to be able to select various different keymaps
-# and keyboards dependent on which actual machine we're going to
-# run on.
- KEYMAP =
- KEYBD =
+ ifneq ($(CONFIG_PC_KEYMAP),y)
+ KEYMAP =
+ endif
endif
ifeq ($(ARCH),sh)
- CONSOLE =
- ifeq ($(CONFIG_SH_HP600),y)
- KEYMAP = defkeymap.o
- KEYBD = scan_keyb.o hp600_keyb.o
+ ifneq ($(CONFIG_SH_HP600),y)
+ CONSOLE =
+ KEYMAP =
endif
endif
@@ -142,44 +135,10 @@
obj-$(CONFIG_NVRAM) += nvram.o
endif
-obj-$(CONFIG_VIDEO_DEV) += videodev.o
-
obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
obj-$(CONFIG_977_WATCHDOG) += wdt977.o
obj-$(CONFIG_DS1620) += ds1620.o
obj-$(CONFIG_INTEL_RNG) += i810_rng.o
-
-obj-$(CONFIG_BUS_I2C) += i2c-old.o
-obj-$(CONFIG_VIDEO_BT848) += bttv.o msp3400.o \
- tda7432.o tda8425.o tda985x.o tda9875.o tea6300.o tea6420.o tuner.o
-obj-$(CONFIG_SOUND_TVMIXER) += tvmixer.o
-
-obj-$(CONFIG_VIDEO_ZR36120) += zoran.o i2c-old.o tuner.o saa7110.o saa7111.o saa7185.o
-obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o i2c-old.o
-obj-$(CONFIG_VIDEO_SAA5249) += saa5249.o i2c-old.o
-obj-$(CONFIG_VIDEO_CQCAM) += c-qcam.o
-obj-$(CONFIG_VIDEO_BWQCAM) += bw-qcam.o
-obj-$(CONFIG_VIDEO_ZORAN) += buz.o i2c-old.o saa7110.o saa7111.o saa7185.o
-obj-$(CONFIG_VIDEO_LML33) += bt856.o bt819.o
-obj-$(CONFIG_VIDEO_PMS) += pms.o
-obj-$(CONFIG_VIDEO_PLANB) += planb.o
-obj-$(CONFIG_VIDEO_VINO) += vino.o
-obj-$(CONFIG_VIDEO_STRADIS) += stradis.o
-obj-$(CONFIG_VIDEO_CPIA) += cpia.o
-obj-$(CONFIG_VIDEO_CPIA_PP) += cpia_pp.o
-obj-$(CONFIG_VIDEO_CPIA_USB) += cpia_usb.o
-obj-$(CONFIG_RADIO_AZTECH) += radio-aztech.o
-obj-$(CONFIG_RADIO_RTRACK2) += radio-rtrack2.o
-obj-$(CONFIG_RADIO_SF16FMI) += radio-sf16fmi.o
-obj-$(CONFIG_RADIO_CADET) += radio-cadet.o
-obj-$(CONFIG_RADIO_TYPHOON) += radio-typhoon.o
-obj-$(CONFIG_RADIO_TERRATEC) += radio-terratec.o
-obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o
-obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o
-obj-$(CONFIG_RADIO_MIROPCM20) += radio-miropcm20.o
-obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
-obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
-obj-$(CONFIG_TUNER_3036) += tuner-3036.o
obj-$(CONFIG_QIC02_TAPE) += tpqic02.o
ifeq ($(CONFIG_FTAPE),y)
@@ -227,36 +186,17 @@
endif
endif
-# Extract lists of the multi-part drivers.
-# The 'int-*' lists are the intermediate files used to build the multi's.
-
-multi-y := $(filter $(list-multi), $(obj-y))
-multi-m := $(filter $(list-multi), $(obj-m))
-int-y := $(sort $(foreach m, $(multi-y), $($(basename $(m))-objs)))
-int-m := $(sort $(foreach m, $(multi-m), $($(basename $(m))-objs)))
-
# Files that are both resident and modular: remove from modular.
-
obj-m := $(filter-out $(obj-y), $(obj-m))
-int-m := $(filter-out $(int-y), $(int-m))
-# Take multi-part drivers out of obj-y and put components in.
-
-obj-y := $(filter-out $(list-multi), $(obj-y)) $(int-y)
-
# Translate to Rules.make lists.
-
O_OBJS := $(filter-out $(export-objs), $(obj-y))
OX_OBJS := $(filter $(export-objs), $(obj-y))
M_OBJS := $(sort $(filter-out $(export-objs), $(obj-m)))
MX_OBJS := $(sort $(filter $(export-objs), $(obj-m)))
-MI_OBJS := $(sort $(filter-out $(export-objs), $(int-m)))
-MIX_OBJS := $(sort $(filter $(export-objs), $(int-m)))
include $(TOPDIR)/Rules.make
-fastdep:
-
conmakehash: conmakehash.c
$(HOSTCC) $(HOSTCFLAGS) -o conmakehash conmakehash.c
@@ -267,10 +207,3 @@
defkeymap.c: defkeymap.map
loadkeys --mktable defkeymap.map > defkeymap.c
-
-zoran.o: zr36120.o zr36120_i2c.o zr36120_mem.o
- $(LD) $(LD_RFLAG) -r -o $@ zr36120.o zr36120_i2c.o zr36120_mem.o
-
-bttv.o: $(bttv-objs)
- $(LD) $(LD_RFLAG) -r -o $@ $(bttv-objs)
-
Index: linux/drivers/usb/Config.in
===================================================================
RCS file: /cvsroot/linuxconsole/ruby/linux/drivers/usb/Config.in,v
retrieving revision 1.9
diff -u -r1.9 Config.in
--- linux/drivers/usb/Config.in 2000/07/30 14:42:08 1.9
+++ linux/drivers/usb/Config.in 2000/08/27 18:32:50
@@ -68,7 +68,7 @@
dep_tristate ' DABUSB driver' CONFIG_USB_DABUSB $CONFIG_USB
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
dep_tristate ' PLUSB Prolific USB-Network driver (EXPERIMENTAL)' CONFIG_USB_PLUSB $CONFIG_USB $CONFIG_NET
- dep_tristate ' USB ADMtek Pegasus-based device support (EXPERIMENTAL)' CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET
+ dep_tristate ' USB ADMtek Pegasus-based ethernet device support (EXPERIMENTAL)' CONFIG_USB_PEGASUS $CONFIG_USB $CONFIG_NET
dep_tristate ' USB Diamond Rio500 support (EXPERIMENTAL)' CONFIG_USB_RIO500 $CONFIG_USB
dep_tristate ' D-Link USB FM radio support (EXPERIMENTAL)' CONFIG_USB_DSBR $CONFIG_USB $CONFIG_VIDEO_DEV
dep_tristate ' USB Bluetooth support (EXPERIMENTAL)' CONFIG_USB_BLUETOOTH $CONFIG_USB
--
Always remember that you are unique. Just like everyone else.
|
