Menu
▾
▴
[Linuxconsole-commit]CVS: ruby/linux/drivers/input/touchscreen h3600_ts_input.c,NONE,1.4
|
From: James S. <jsi...@us...> - 2002-01-23 06:39:40
|
Update of /cvsroot/linuxconsole/ruby/linux/drivers/input/touchscreen
In directory usw-pr-cvs1:/tmp/cvs-serv19650
Added Files:
Tag: 1.4
h3600_ts_input.c
Log Message:
Moving around.
--- NEW FILE: h3600_ts_input.c ---
/*
* $Id: h3600_ts_input.c,v 1.4 2002/01/23 06:39:37 jsimmons Exp $
*
* Copyright (c) 2001 "Crazy" James Simmons jsi...@tr...
*
* Sponsored by Transvirtual Technology.
*
* Derived from the code in h3600_ts.[ch] by Charles Flynn
*/
/*
* Driver for the h3600 Touch Screen and other Atmel controlled devices.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Should you need to contact me, the author, you can do so by
* e-mail - mail your message to <jsi...@tr...>.
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
/* SA1100 serial defines */
#include <asm/arch/hardware.h>
#include <asm/arch/irqs.h>
/*
* Definitions & global arrays.
*/
/* The start and end of frame characters SOF and EOF */
#define CHAR_SOF 0x02
#define CHAR_EOF 0x03
#define FRAME_OVERHEAD 3 /* CHAR_SOF,CHAR_EOF,LENGTH = 3 */
/*
Atmel events and response IDs contained in frame.
Programmer has no control over these numbers.
TODO there are holes - specifically 1,7,0x0a
*/
#define VERSION_ID 0 /* Get Version (request/respose) */
#define KEYBD_ID 2 /* Keyboard (event) */
#define TOUCHS_ID 3 /* Touch Screen (event)*/
#define EEPROM_READ_ID 4 /* (request/response) */
#define EEPROM_WRITE_ID 5 /* (request/response) */
#define THERMAL_ID 6 /* (request/response) */
#define NOTIFY_LED_ID 8 /* (request/response) */
#define BATTERY_ID 9 /* (request/response) */
#define SPI_READ_ID 0x0b /* ( request/response) */
#define SPI_WRITE_ID 0x0c /* ( request/response) */
#define FLITE_ID 0x0d /* backlight ( request/response) */
#define STX_ID 0xa1 /* extension pack status (req/resp) */
#define MAX_ID 14
#define H3600_MAX_LENGTH 16
#define H3600_KEY 0xf
#define H3600_SCANCODE_RECORD 1 /* 1 -> record button */
#define H3600_SCANCODE_CALENDAR 2 /* 2 -> calendar */
#define H3600_SCANCODE_CONTACTS 3 /* 3 -> contact */
#define H3600_SCANCODE_Q 4 /* 4 -> Q button */
#define H3600_SCANCODE_START 5 /* 5 -> start menu */
#define H3600_SCANCODE_UP 6 /* 6 -> up */
#define H3600_SCANCODE_RIGHT 7 /* 7 -> right */
#define H3600_SCANCODE_LEFT 8 /* 8 -> left */
#define H3600_SCANCODE_DOWN 9 /* 9 -> down */
static char *h3600_name = "H3600 TouchScreen";
/*
* Per-touchscreen data.
*/
struct h3600_dev {
struct input_dev dev;
struct serio *serio;
unsigned char event; /* event ID from packet */
unsigned char chksum;
unsigned char len;
unsigned char idx;
unsigned char buf[H3600_MAX_LENGTH];
char phys[32];
};
static void action_button_handler(int irq, void *dev_id, struct pt_regs *regs)
{
int down = (GPLR & GPIO_BITSY_ACTION_BUTTON) ? 0 : 1;
struct input_dev *dev = (struct input_dev *) dev_id;
input_report_key(dev, KEY_ENTER, down);
}
static void npower_button_handler(int irq, void *dev_id, struct pt_regs *regs)
{
int down = (GPLR & GPIO_BITSY_NPOWER_BUTTON) ? 0 : 1;
struct input_dev *dev = (struct input_dev *) dev_id;
/*
* This interrupt is only called when we release the key. So we have
* to fake a key press.
*/
input_report_key(dev, KEY_SUSPEND, 1);
input_report_key(dev, KEY_SUSPEND, down);
}
#ifdef CONFIG_PM
static int flite_brightness = 25;
enum flite_pwr {
FLITE_PWR_OFF = 0,
FLITE_PWR_ON = 1
};
/*
* h3600_flite_power: enables or disables power to frontlight, using last bright */
unsigned int h3600_flite_power(struct input_dev *dev, enum flite_pwr pwr)
{
unsigned char brightness = ((pwr==FLITE_PWR_OFF) ? 0:flite_brightness);
struct h3600_dev *ts = dev->private;
/* Must be in this order */
ts->serio->write(ts->serio, 1);
ts->serio->write(ts->serio, pwr);
ts->serio->write(ts->serio, brightness);
return 0;
}
static int suspended = 0;
static int h3600ts_pm_callback(struct pm_dev *pm_dev, pm_request_t req,
void *data)
{
struct input_dev *dev = (struct input_dev *) data;
switch (req) {
case PM_SUSPEND: /* enter D1-D3 */
suspended = 1;
h3600_flite_power(dev, FLITE_PWR_OFF);
break;
case PM_BLANK:
if (!suspended)
h3600_flite_power(dev, FLITE_PWR_OFF);
break;
case PM_RESUME: /* enter D0 */
/* same as unblank */
case PM_UNBLANK:
if (suspended) {
//initSerial();
suspended = 0;
}
h3600_flite_power(dev, FLITE_PWR_ON);
break;
}
return 0;
}
#endif
/*
* This function translates the native event packets to linux input event
* packets. Some packets coming from serial are not touchscreen related. In
* this case we send them off to be processed elsewhere.
*/
static void h3600ts_process_packet(struct h3600_dev *ts)
{
struct input_dev *dev = &ts->dev;
static int touched = 0;
int key, down = 0;
switch (ts->event) {
/*
Buttons - returned as a single byte
7 6 5 4 3 2 1 0
S x x x N N N N
S switch state ( 0=pressed 1=released)
x Unused.
NNNN switch number 0-15
Note: This is true for non interrupt generated key events.
*/
case KEYBD_ID:
down = (ts->buf[0] & 0x80) ? 0 : 1;
switch (ts->buf[0] & 0x7f) {
case H3600_SCANCODE_RECORD:
key = KEY_RECORD;
break;
case H3600_SCANCODE_CALENDAR:
key = KEY_PROG1;
break;
case H3600_SCANCODE_CONTACTS:
key = KEY_PROG2;
break;
case H3600_SCANCODE_Q:
key = KEY_Q;
break;
case H3600_SCANCODE_START:
key = KEY_PROG3;
break;
case H3600_SCANCODE_UP:
key = KEY_UP;
break;
case H3600_SCANCODE_RIGHT:
key = KEY_RIGHT;
break;
case H3600_SCANCODE_LEFT:
key = KEY_LEFT;
break;
case H3600_SCANCODE_DOWN:
key = KEY_DOWN;
break;
default:
key = 0;
}
if (key)
input_report_key(dev, key, down);
break;
/*
* Native touchscreen event data is formatted as shown below:-
*
* +-------+-------+-------+-------+
* | Xmsb | Xlsb | Ymsb | Ylsb |
* +-------+-------+-------+-------+
* byte 0 1 2 3
*/
case TOUCHS_ID:
if (!touched) {
input_report_key(dev, BTN_TOUCH, 1);
touched = 1;
}
if (ts->len) {
unsigned short x, y;
x = ts->buf[0]; x <<= 8; x += ts->buf[1];
y = ts->buf[2]; y <<= 8; y += ts->buf[3];
input_report_abs(dev, ABS_X, x);
input_report_abs(dev, ABS_Y, y);
} else {
input_report_key(dev, BTN_TOUCH, 0);
touched = 0;
}
break;
default:
/* Send a non input event elsewhere */
break;
}
}
/*
* h3600ts_event() handles events from the input module.
*/
static int h3600ts_event(struct input_dev *dev, unsigned int type,
unsigned int code, int value)
{
struct h3600_dev *ts = dev->private;
switch (type) {
case EV_LED: {
// ts->serio->write(ts->serio, SOME_CMD);
return 0;
}
}
return -1;
}
/*
Frame format
byte 1 2 3 len + 4
+-------+---------------+---------------+--=------------+
|SOF |id |len | len bytes | Chksum |
+-------+---------------+---------------+--=------------+
bit 0 7 8 11 12 15 16
+-------+---------------+-------+
|SOF |id |0 |Chksum | - Note Chksum does not include SOF
+-------+---------------+-------+
bit 0 7 8 11 12 15 16
*/
static int state;
/* decode States */
#define STATE_SOF 0 /* start of FRAME */
#define STATE_ID 1 /* state where we decode the ID & len */
#define STATE_DATA 2 /* state where we decode data */
#define STATE_EOF 3 /* state where we decode checksum or EOF */
static void h3600ts_interrupt(struct serio *serio, unsigned char data,
unsigned int flags)
{
struct h3600_dev *ts = serio->private;
/*
* We have a new frame coming in.
*/
switch (state) {
case STATE_SOF:
if (data == CHAR_SOF)
state = STATE_ID;
return;
case STATE_ID:
ts->event = (data & 0xf0) >> 4;
ts->len = (data & 0xf);
ts->idx = 0;
if (ts->event >= MAX_ID) {
state = STATE_SOF;
break;
}
ts->chksum = data;
state=(ts->len > 0 ) ? STATE_DATA : STATE_EOF;
break;
case STATE_DATA:
ts->chksum += data;
ts->buf[ts->idx]= data;
if(++ts->idx == ts->len)
state = STATE_EOF;
break;
case STATE_EOF:
state = STATE_SOF;
if (data == CHAR_EOF || data == ts->chksum )
h3600ts_process_packet(ts);
break;
default:
printk("Error3\n");
break;
}
}
/*
* h3600ts_connect() is the routine that is called when someone adds a
* new serio device. It looks whether it was registered as a H3600 touchscreen
* and if yes, registers it as an input device.
*/
static void h3600ts_connect(struct serio *serio, struct serio_dev *dev)
{
struct h3600_dev *ts;
if (serio->type != (SERIO_RS232 | SERIO_H3600))
return;
if (!(ts = kmalloc(sizeof(struct h3600_dev), GFP_KERNEL)))
return;
memset(ts, 0, sizeof(struct h3600_dev));
/* Device specific stuff */
set_GPIO_IRQ_edge( GPIO_BITSY_ACTION_BUTTON, GPIO_BOTH_EDGES );
set_GPIO_IRQ_edge( GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE );
if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler,
SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM,
"h3600_action", &ts->dev)) {
printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
kfree(ts);
return;
}
if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
SA_SHIRQ | SA_INTERRUPT | SA_SAMPLE_RANDOM,
"h3600_suspend", &ts->dev)) {
free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev);
printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n");
kfree(ts);
return;
}
/* Now we have things going we setup our input device */
ts->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_LED) | BIT(EV_PWR);
ts->dev.absbit[0] = BIT(ABS_X) | BIT(ABS_Y);
ts->dev.ledbit[0] = BIT(LED_SLEEP);
ts->dev.absmin[ABS_X] = 60; ts->dev.absmin[ABS_Y] = 35;
ts->dev.absmax[ABS_X] = 985; ts->dev.absmax[ABS_Y] = 1024;
ts->dev.absfuzz[ABS_X] = 0; ts->dev.absfuzz[ABS_Y] = 0;
ts->serio = serio;
serio->private = ts;
set_bit(KEY_RECORD, ts->dev.keybit);
set_bit(KEY_Q, ts->dev.keybit);
set_bit(KEY_PROG1, ts->dev.keybit);
set_bit(KEY_PROG2, ts->dev.keybit);
set_bit(KEY_PROG3, ts->dev.keybit);
set_bit(KEY_UP, ts->dev.keybit);
set_bit(KEY_RIGHT, ts->dev.keybit);
set_bit(KEY_LEFT, ts->dev.keybit);
set_bit(KEY_DOWN, ts->dev.keybit);
set_bit(KEY_ENTER, ts->dev.keybit);
ts->dev.keybit[LONG(BTN_TOUCH)] |= BIT(BTN_TOUCH);
ts->dev.keybit[LONG(KEY_SUSPEND)] |= BIT(KEY_SUSPEND);
sprintf(ts->phys, "%s/input0", serio->phys);
ts->dev.event = h3600ts_event;
ts->dev.private = ts;
ts->dev.name = h3600_name;
ts->dev.phys = ts->phys;
ts->dev.idbus = BUS_RS232;
ts->dev.idvendor = SERIO_H3600;
ts->dev.idproduct = 0x0666; /* FIXME !!! We can ask the hardware */
ts->dev.idversion = 0x0100;
if (serio_open(serio, dev)) {
free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts);
free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts);
kfree(ts);
return;
}
//h3600_flite_control(1, 25); /* default brightness */
#ifdef CONFIG_PM
ts->dev.pm_dev = pm_register(PM_ILLUMINATION_DEV, PM_SYS_LIGHT,
h3600ts_pm_callback);
printk("registered pm callback\n");
#endif
input_register_device(&ts->dev);
printk(KERN_INFO "input: %s on %s\n", h3600_name, serio->phys);
}
/*
* h3600ts_disconnect() is the opposite of h3600ts_connect()
*/
static void h3600ts_disconnect(struct serio *serio)
{
struct h3600_dev *ts = serio->private;
free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, &ts->dev);
free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, &ts->dev);
input_unregister_device(&ts->dev);
serio_close(serio);
kfree(ts);
}
/*
* The serio device structure.
*/
static struct serio_dev h3600ts_dev = {
interrupt: h3600ts_interrupt,
connect: h3600ts_connect,
disconnect: h3600ts_disconnect,
};
/*
* The functions for inserting/removing us as a module.
*/
static int __init h3600ts_init(void)
{
serio_register_device(&h3600ts_dev);
return 0;
}
static void __exit h3600ts_exit(void)
{
serio_unregister_device(&h3600ts_dev);
}
module_init(h3600ts_init);
module_exit(h3600ts_exit);
|
