Update of /cvsroot/linuxconsole/ruby/linux/arch/ppc
In directory usw-pr-cvs1:/tmp/cvs-serv1749/linux/arch/ppc
Modified Files:
Config.help config.in
Log Message:
Synced to 2.5.7
Index: Config.help
===================================================================
RCS file: /cvsroot/linuxconsole/ruby/linux/arch/ppc/Config.help,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -d -r1.2 -r1.3
--- Config.help 14 Mar 2002 22:32:22 -0000 1.2
+++ Config.help 22 Mar 2002 20:13:57 -0000 1.3
@@ -340,6 +340,19 @@
answer will get "defaulted" for you if you enable any of the Linux
CD-ROM drivers).
+CONFIG_INPUT_ADBHID
+ Say Y here if you want to have ADB (Apple Desktop Bus) HID devices
+ such as keyboards, mice, joysticks, or graphic tablets handled by
+ the input layer. If you say Y here, make sure to say Y to the
+ corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV),
+ "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface
+ support" (CONFIG_INPUT_EVDEV) as well.
+
+ If you say N here, you still have the option of using the old ADB
+ keyboard and mouse drivers.
+
+ If unsure, say Y.
+
CONFIG_PREP_RESIDUAL
Some PReP systems have residual data passed to the kernel by the
firmware. This allows detection of memory size, devices present and
@@ -404,34 +417,6 @@
here. If you also have regular serial ports and enable the driver
for them, you can't currently use the serial console feature.
-CONFIG_SOUND
- If you have a sound card in your computer, i.e. if it can say more
- than an occasional beep, say Y. Be sure to have all the information
- about your sound card and its configuration down (I/O port,
- interrupt and DMA channel), because you will be asked for it.
-
- You want to read the Sound-HOWTO, available from
- <http://www.linuxdoc.org/docs.html#howto>. General information about
- the modular sound system is contained in the files
- <file:Documentation/sound/Introduction>. The file
- <file:Documentation/sound/README.OSS> contains some slightly
- outdated but still useful information as well.
-
- If you have a PnP sound card and you want to configure it at boot
- time using the ISA PnP tools (read
- <http://www.roestock.demon.co.uk/isapnptools/>), then you need to
- compile the sound card support as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want)
- and load that module after the PnP configuration is finished. To do
- this, say M here and read <file:Documentation/modules.txt> as well
- as <file:Documentation/sound/README.modules>; the module will be
- called soundcore.o.
-
- I'm told that even without a sound card, you can make your computer
- say more than an occasional beep, by programming the PC speaker.
- Kernel patches and supporting utilities to do that are in the pcsp
- package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
CONFIG_MAGIC_SYSRQ
If you say Y here, you will have some control over the system even
if the system crashes for example during kernel debugging (e.g., you
@@ -865,6 +850,26 @@
Date of Release: early 2001 (?)
End of life: -
URL: <http://www.microsys.de/html/cu824.html>
+
+CONFIG_MAC_ADBKEYCODES
+ This provides support for sending raw ADB keycodes to console
+ devices. This is the default up to 2.4.0, but in future this may be
+ phased out in favor of generic Linux keycodes. If you say Y here,
+ you can dynamically switch via the
+ /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
+ sysctl and with the "keyboard_sends_linux_keycodes=" kernel
+ argument.
+
+ If unsure, say Y here.
+
+CONFIG_MAC_EMUMOUSEBTN
+ This provides generic support for emulating the 2nd and 3rd mouse
+ button with keypresses. If you say Y here, the emulation is still
+ disabled by default. The emulation is controlled by these sysctl
+ entries:
+ /proc/sys/dev/mac_hid/mouse_button_emulation
+ /proc/sys/dev/mac_hid/mouse_button2_keycode
+ /proc/sys/dev/mac_hid/mouse_button3_keycode
CONFIG_PPC_RTC
If you say Y here and create a character special file /dev/rtc with
Index: config.in
===================================================================
RCS file: /cvsroot/linuxconsole/ruby/linux/arch/ppc/config.in,v
retrieving revision 1.27
retrieving revision 1.28
diff -u -d -r1.27 -r1.28
--- config.in 18 Mar 2002 19:29:09 -0000 1.27
+++ config.in 22 Mar 2002 20:13:57 -0000 1.28
@@ -422,7 +422,6 @@
if [ "$CONFIG_IDE" != "n" ]; then
source drivers/ide/Config.in
else
- define_bool CONFIG_BLK_DEV_IDE_MODES n
define_bool CONFIG_BLK_DEV_HD n
fi
endmenu
|
