Menu
▾
▴
linuxconsole-commit
|
From: Vojtech P. <vo...@us...> - 2002-01-26 19:20:40
|
Update of /cvsroot/linuxconsole/ruby/linux/drivers/usb In directory usw-pr-cvs1:/tmp/cvs-serv15263/drivers/usb Modified Files: hid-core.c Added Files: Config.help Log Message: psmouse: add a workaround for mice which don't send 0xfa to the ID command hid-core: don't filter out-of-range values - they may be 'null' values Config.help: add new style helpfiles --- NEW FILE: Config.help --- CONFIG_USB Universal Serial Bus (USB) is a specification for a serial bus subsystem which offers higher speeds and more features than the traditional PC serial port. The bus supplies power to peripherals and allows for hot swapping. Up to 127 USB peripherals can be connected to a single USB port in a tree structure. The USB port is the root of the tree, the peripherals are the leaves and the inner nodes are special USB devices called hubs. Many newer PC's have USB ports and newer peripherals such as scanners, keyboards, mice, modems, and printers support the USB protocol and can be connected to the PC via those ports. Say Y here if your computer has a USB port and you want to use USB devices. You then need to say Y to at least one of "UHCI support" or "OHCI support" below (the type of interface that the USB hardware in your computer provides to the operating system) and then choose from among the drivers for USB peripherals. You may want to check out the information provided in <file:Documentation/usb/> and especially the links given in <file:Documentation/usb/usb-help.txt>. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called usbcore.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_DEBUG Say Y here if you want the USB core & hub drivers to produce a bunch of debug messages to the system log. Select this if you are having a problem with USB support and want to see more of what is going on. CONFIG_USB_LONG_TIMEOUT This option makes the standard time out a bit longer. Basically, some devices are just slow to respond, so this makes usb more patient. There should be no harm in selecting this, but it is needed for some MGE Ellipse UPSes. If you have an MGE Ellipse UPS, or you see timeouts in HID transactions, say Y; otherwise say N. CONFIG_USB_UHCI The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB host controller). If your USB host controller conforms to this standard, you may want to say Y, but see below. All recent boards with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX, i810, i820) conform to this standard. Also all VIA PCI chipsets (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro 133). Currently there exist two drivers for UHCI host controllers: this one and the so-called JE driver, which you can get from "UHCI alternate (JE) support", below. You need only one. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called usb-uhci.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_UHCI_ALT The Universal Host Controller Interface is a standard by Intel for accessing the USB hardware in the PC (which is also called the USB host controller). If your USB host controller conforms to this standard, you may want to say Y, but see below. All recent boards with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX, i810, i820) conform to this standard. Also all VIA PCI chipsets (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro 133). If unsure, say Y. Currently there exist two drivers for UHCI host controllers: this so-called JE driver, and the one you get from "UHCI support", above. You need only one. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called uhci.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_OHCI The Open Host Controller Interface is a standard by Compaq/Microsoft/National for accessing the USB PC hardware (also called USB host controller). If your USB host controller conforms to this standard, say Y. The USB host controllers on most non-Intel architectures and on several x86 compatibles with non-Intel chipsets -- like SiS (aktual 610, 610 and so on) or ALi (ALi IV, ALi V, Aladdin Pro..) -- conform to this standard. You may want to read <file:Documentation/usb/ohci.txt>. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called usb-ohci.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_HID Say Y here if you want full HID support to connect keyboards, mice, joysticks, graphic tablets, or any other HID based devices to your computer via USB. You can't use this driver and the HIDBP (Boot Protocol) keyboard and mouse drivers at the same time. More information is available: <file:Documentation/input/input.txt>. If unsure, say Y. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called hid.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_HIDDEV Say Y here if you want to support HID devices (from the USB specification standpoint) that aren't strictly user interface devices, like monitor controls and Uninterruptable Power Supplies. This module supports these devices separately using a separate event interface on /dev/usb/hiddevX (char 180:96 to 180:111). This driver requires CONFIG_USB_HID. If unsure, say N. CONFIG_USB_KBD Say Y here if you don't want to use the generic HID driver for your USB keyboard and prefer to use the keyboard in its limited Boot Protocol mode instead. This driver is much smaller than the HID one. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called usbkbd.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. If unsure, say N. CONFIG_USB_MOUSE Say Y here if you don't want to use the generic HID driver for your USB mouse and prefer to use the mouse in its limited Boot Protocol mode instead. This driver is much smaller than the HID one. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called usbmouse.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. If unsure, say N. CONFIG_USB_WACOM Say Y here if you want to use the USB version of the Wacom Intuos or Graphire tablet. Make sure to say Y to "Mouse support" (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well. This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called wacom.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_POWERMATE Say Y here if you want to use the Griffin Technology, Inc. USB PowerMate device. This device is a stainless steel dial which can measure clockwise and anticlockwise rotation. The dial also acts as a pushbutton. The base contains an LED which can be instructed to pulse or to switch to a particular intensity. You can download userspace tools from http://sowerbutts.com/powermate/ This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called powermate.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_SCANNER Say Y here if you want to connect a USB scanner to your computer's USB port. Please read <file:Documentation/usb/scanner.txt> and <file:Documentation/usb/scanner-hp-sane.txt> for more information. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called scanner.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_AUDIO Say Y here if you want to connect USB audio equipment such as speakers to your computer's USB port. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called audio.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_ACM This driver supports USB modems and ISDN adapters which support the Communication Device Class Abstract Control Model interface. Please read <file:Documentation/usb/acm.txt> for details. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called acm.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_PRINTER Say Y here if you want to connect a USB printer to your computer's USB port. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called printer.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_IBMCAM Say Y here if you want to connect a IBM "C-It" camera, also known as "Xirlink PC Camera" to your computer's USB port. For more information, read <file:Documentation/usb/ibmcam.txt>. This driver uses the Video For Linux API. You must enable (Y or M in config) Video For Linux (under Character Devices) to use this driver. Information on this API and pointers to "v4l" programs may be found on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called ibmcam.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. This camera has several configuration options which can be specified when you load the module. Read <file:Documentation/usb/ibmcam.txt> to learn more. CONFIG_USB_OV511 Say Y here if you want to connect this type of camera to your computer's USB port. See <file:Documentation/usb/ov511.txt> for more information and for a list of supported cameras. This driver uses the Video For Linux API. You must say Y or M to "Video For Linux" (under Character Devices) to use this driver. Information on this API and pointers to "v4l" programs may be found on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called ov511.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_CDCETHER This driver supports devices conforming to the Communication Device Class Ethernet Control Model. This is used in some cable modems. For more details on the specification, get the Communication Device Class specification from <http://www.usb.org/>. This driver should work with the following devices: * Ericsson PipeRider (all variants) * Motorola (DM100 and SB4100) * Broadcom Cable Modem (reference design) * Toshiba PCX1100U and possibly other cable modems The device creates a network device (ethX, where X depends on what other networking devices you have in use), as for a normal PCI or ISA based ethernet network card. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called CDCEther.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_PWC Say Y or M here if you want to use one of these Philips USB webcams: PCA645, PCA646, PCVC675, PCVC680, PCVC690, PCVC730, PCVC740, or the Askey VC010. The PCA635, PCVC665 and PCVC720 are not supported by this driver and never will be. This driver has an optional plugin, which is distributed as a binary module only. It contains code that allow you to use higher resolutions and framerates but may not be distributed as source. But even without this plugin you can these cams for most applications. See <file:Documentation/usb/philips.txt> for more information and installation instructions. The built-in microphone is enabled by selecting USB Audio support. This driver uses the Video For Linux API. You must say Y or M to "Video For Linux" (under Character Devices) to use this driver. Information on this API and pointers to "v4l" programs may be found on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called pwc.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_SE401 Say Y here if you want to connect this type of camera to your computer's USB port. See <file:Documentation/usb/se401.txt> for more information and for a list of supported cameras. This driver uses the Video For Linux API. You must say Y or M to "Video For Linux" (under Multimedia Devices) to use this driver. Information on this API and pointers to "v4l" programs may be found on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called se401.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_STV680 Say Y here if you want to connect this type of camera to your computer's USB port. This includes the Pencam line of cameras. See <file:Documentation/usb/stv680.txt> for more information and for a list of supported cameras. This driver uses the Video For Linux API. You must say Y or M to "Video For Linux" (under Multimedia Devices) to use this driver. Information on this API and pointers to "v4l" programs may be found on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called stv680.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_VICAM Say Y here if you have 3com homeconnect camera (vicam). This driver uses the Video For Linux API. You must say Y or M to "Video For Linux" (under Multimedia Devices) to use this driver. Information on this API and pointers to "v4l" programs may be found on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called vicam.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_PEGASUS Say Y here if you know you have Pegasus or Pegasus II based adapter. If in doubt then look at linux/drivers/usb/pegasus.h for the complete list of supported devices. If your particular adapter is not in the list and you are _sure_ it is Pegasus or Pegasus II based then send me (pma...@ln...) vendor and device IDs. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called pegasus.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_KAWETH Say Y here if you want to use one of the following 10Mbps only USB Ethernet adapters based on the KLSI KL5KUSB101B chipset: 3Com 3C19250 ADS USB-10BT ATEN USB Ethernet ASANTE USB To Ethernet Adapter AOX Endpoints USB Ethernet Correga K.K. D-Link DSB-650C and DU-E10 Entrega / Portgear E45 I-O DATA USB-ET/T Jaton USB Ethernet Device Adapter Kingston Technology USB Ethernet Adapter Linksys USB10T Mobility USB-Ethernet Adapter NetGear EA-101 Peracom Enet and Enet2 Portsmith Express Ethernet Adapter Shark Pocket Adapter SMC 2202USB Sony Vaio port extender This driver is likely to work with most 10Mbps only USB Ethernet adapters, including some "no brand" devices. It does NOT work on SmartBridges smartNIC or on Belkin F5U111 devices - you should use the CATC NetMate driver for those. If you are not sure which one you need, select both, and the correct one should be selected for you. This driver makes the adapter appear as a normal Ethernet interface, typically on eth0, if it is the only ethernet device, or perhaps on eth1, if you have a PCI or ISA ethernet card installed. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called kaweth.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_CATC Say Y if you want to use one of the following 10Mbps USB Ethernet device based on the EL1210A chip. Supported devices are: Belkin F5U111 CATC NetMate CATC NetMate II smartBridges smartNIC This driver makes the adapter appear as a normal Ethernet interface, typically on eth0, if it is the only ethernet device, or perhaps on eth1, if you have a PCI or ISA ethernet card installed. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called catc.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_DC2XX Say Y here if you want to connect this type of still camera to your computer's USB port. See <file:Documentation/usb/dc2xx.txt> for more information; some non-Kodak cameras may also work with this driver, given application support (such as <http://www.gphoto.org/>). This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called dc2xx.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_MDC800 Say Y here if you want to connect this type of still camera to your computer's USB port. This driver can be used with gphoto 0.4.3 and higher (look at <http://www.gphoto.org/>). To use it create a device node with "mknod /dev/mustek c 180 32" and configure it in your software. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called mdc800.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_STORAGE Say Y here if you want to connect USB mass storage devices to your computer's USB port. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called usb-storage.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_STORAGE_DEBUG Say Y here in order to have the USB Mass Storage code generate verbose debugging messages. CONFIG_USB_STORAGE_ISD200 Say Y here if you want to use USB Mass Store devices based on the In-Systems Design ISD-200 USB/ATA bridge. Some of the products that use this chip are: - Archos Jukebox 6000 - ISD SmartCable for Storage - Taiwan Skymaster CD530U/DEL-0241 IDE bridge - Sony CRX10U CD-R/RW drive - CyQ've CQ8060A CDRW drive - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) CONFIG_USB_USS720 This driver is for USB parallel port adapters that use the Lucent Technologies USS-720 chip. These cables are plugged into your USB port and provide USB compatibility to peripherals designed with parallel port interfaces. The chip has two modes: automatic mode and manual mode. In automatic mode, it looks to the computer like a standard USB printer. Only printers may be connected to the USS-720 in this mode. The generic USB printer driver ("USB Printer support", above) may be used in that mode, and you can say N here if you want to use the chip only in this mode. Manual mode is not limited to printers, any parallel port device should work. This driver utilizes manual mode. Note however that some operations are three orders of magnitude slower than on a PCI/ISA Parallel Port, so timing critical applications might not work. Say Y here if you own an USS-720 USB->Parport cable and intend to connect anything other than a printer to it. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called uss720.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_DEVICEFS If you say Y here (and to "/proc file system support" in the "File systems section, above), you will get a file /proc/bus/usb/devices which lists the devices currently connected to your USB bus or busses, a file /proc/bus/usb/drivers which lists the USB kernel client drivers currently loaded, and for every connected device a file named "/proc/bus/usb/xxx/yyy", where xxx is the bus number and yyy the device number; the latter files can be used by user space programs to talk directly to the device. These files are "virtual", meaning they are generated on the fly and not stored on the hard drive. You may need to mount the usbdevfs file system to see the files, use mount -t usbdevfs none /proc/bus/usb For the format of the various /proc/bus/usb/ files, please read <file:Documentation/usb/proc_usb_info.txt>. Please note that this code is completely unrelated to devfs, the "/dev file system support". Most users want to say Y here. CONFIG_USB_BANDWIDTH If you say Y here, the USB subsystem enforces USB bandwidth allocation and will prevent some device opens from succeeding if they would cause USB bandwidth usage to go above 90% of the bus bandwidth. If you say N here, these conditions will cause warning messages about USB bandwidth usage to be logged and some devices or drivers may not work correctly. CONFIG_USB_DABUSB A Digital Audio Broadcasting (DAB) Receiver for USB and Linux brought to you by the DAB-Team (<http://dab.in.tum.de/>). This driver can be taken as an example for URB-based bulk, control, and isochronous transactions. URB's are explained in <file:Documentation/usb/URB.txt>. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called dabusb.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_USBNET This driver supports network links over USB with USB "Network" or "data transfer" cables, often used to network laptops to PCs. Such cables have chips from suppliers such as Belkin/eTEK, GeneSys (GeneLink), NetChip and Prolific. Intelligent USB devices could also use this approach to provide Internet access, using standard USB cabling. You can find these chips also on some motherboards with USB PC2PC support. These links will have names like "usb0", "usb1", etc. They act like two-node Ethernets, so you can use 802.1d Ethernet Bridging (CONFIG_BRIDGE) to simplify your network routing. This code is also available as a kernel module (code which can be inserted in and removed from the running kernel whenever you want). The module will be called usbnet.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_STORAGE_FREECOM Support for the Freecom USB to IDE/ATAPI adaptor. Freecom has a web page at <http://www.freecom.de/>. CONFIG_USB_STORAGE_DPCM Say Y here to support the Microtech ZiO! CompactFlash/SmartMedia reader, details at <http://www.microtechint.com/zio/index.html>. This driver treats the flash card as a removable storage device. CONFIG_USB_STORAGE_SDDR09 Say Y here to include additional code to support the Sandisk SDDR-09 SmartMedia reader in the USB Mass Storage driver. CONFIG_USB_RIO500 Say Y here if you want to connect a USB Rio500 mp3 player to your computer's USB port. Please read <file:Documentation/usb/rio.txt> for more information. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called rio500.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_AUERSWALD Say Y here if you want to connect an Auerswald USB ISDN Device to your computer's USB port. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called auerswald.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_DSBR Say Y here if you want to connect this type of radio to your computer's USB port. Note that the audio is not digital, and you must connect the line out connector to a sound card or a set of speakers. This driver uses the Video For Linux API. You must enable (Y or M in config) Video For Linux (under Character Devices) to use this driver. Information on this API and pointers to "v4l" programs may be found on the WWW at <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called dsbr100.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. CONFIG_USB_MICROTEK Say Y here if you want support for the Microtek X6USB and possibly the Phantom 336CX, Phantom C6 and ScanMaker V6U(S)L. Support for anything but the X6 is experimental. Please report failures and successes. The scanner will appear as a scsi generic device to the rest of the system. Scsi support is required for this driver to compile and work. SANE 1.0.4 or newer is needed to make use of your scanner. This driver can be compiled as a module. CONFIG_USB_HPUSBSCSI Say Y here if you want support for the HP 53xx series of scanners and the Minolta Scan Dual. This driver is experimental. The scanner will be accessible as a SCSI device. CONFIG_USB_BLUETOOTH Say Y here if you want to connect a USB Bluetooth device to your computer's USB port. You will need the Bluetooth stack (available at <http://developer.axis.com/software/index.shtml>) to fully use the device. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called bluetooth.o. If you want to compile it as a module, say M here and read <file:Documentation/modules.txt>. Index: hid-core.c =================================================================== RCS file: /cvsroot/linuxconsole/ruby/linux/drivers/usb/hid-core.c,v retrieving revision 1.40 retrieving revision 1.41 diff -u -d -r1.40 -r1.41 --- hid-core.c 2002/01/24 21:59:47 1.40 +++ hid-core.c 2002/01/26 19:20:37 1.41 @@ -918,11 +918,6 @@ return -1; } } - if ( (value > field->logical_maximum) - || (value < field->logical_minimum)) { - dbg("value %d is invalid", value); - return -1; - } field->value[offset] = value; return 0; } |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X