Update of /cvsroot/linuxconsole/ruby/linux/drivers/char
In directory usw-pr-cvs1:/tmp/cvs-serv1083
Modified Files:
Config.in
Log Message:
Not every serial driver has been converted over to new serial api.
Index: Config.in
===================================================================
RCS file: /cvsroot/linuxconsole/ruby/linux/drivers/char/Config.in,v
retrieving revision 1.33
retrieving revision 1.34
diff -u -d -r1.33 -r1.34
--- Config.in 2001/12/13 22:04:42 1.33
+++ Config.in 2001/12/22 17:04:47 1.34
@@ -31,48 +31,49 @@
bool ' Support special multiport boards' CONFIG_SERIAL_MULTIPORT
bool ' Support the Bell Technologies HUB6 card' CONFIG_HUB6
fi
- bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD
- if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then
- tristate ' Computone IntelliPort Plus serial support' CONFIG_COMPUTONE
- tristate ' Comtrol Rocketport support' CONFIG_ROCKETPORT
- tristate ' Cyclades async mux support' CONFIG_CYCLADES
- if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then
- bool ' Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR
- fi
- tristate ' Digiboard Intelligent Async Support' CONFIG_DIGIEPCA
- if [ "$CONFIG_DIGIEPCA" = "n" ]; then
- tristate ' Digiboard PC/Xx Support' CONFIG_DIGI
- fi
- tristate ' Hayes ESP serial port support' CONFIG_ESPSERIAL
- tristate ' Moxa Intellio support' CONFIG_MOXA_INTELLIO
- tristate ' Moxa SmartIO support' CONFIG_MOXA_SMARTIO
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- dep_tristate ' Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m
- fi
- tristate ' Microgate SyncLink card support' CONFIG_SYNCLINK
- tristate ' HDLC line discipline support' CONFIG_N_HDLC
- tristate ' SDL RISCom/8 card support' CONFIG_RISCOM8
- tristate ' Specialix IO8+ card support' CONFIG_SPECIALIX
- if [ "$CONFIG_SPECIALIX" != "n" ]; then
- bool ' Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS
- fi
- tristate ' Specialix SX (and SI) card support' CONFIG_SX
- tristate ' Specialix RIO system support' CONFIG_RIO
- if [ "$CONFIG_RIO" != "n" ]; then
- bool ' Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI
- fi
- bool ' Stallion multiport serial support' CONFIG_STALDRV
- if [ "$CONFIG_STALDRV" = "y" ]; then
- tristate ' Stallion EasyIO or EC8/32 support' CONFIG_STALLION
- tristate ' Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
- fi
- if [ "$CONFIG_MIPS" = "y" ]; then
- bool ' TMPTX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912
- dep_bool ' Console on TMPTX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912
- bool ' Enable Au1000 UART Support' CONFIG_AU1000_UART
- if [ "$CONFIG_AU1000_UART" = "y" ]; then
- bool ' Enable Au1000 serial console' CONFIG_AU1000_SERIAL_CONSOLE
- fi
+fi
+
+bool 'Non-standard serial port support' CONFIG_SERIAL_NONSTANDARD
+if [ "$CONFIG_SERIAL_NONSTANDARD" = "y" ]; then
+ tristate ' Computone IntelliPort Plus serial support' CONFIG_COMPUTONE
+ tristate ' Comtrol Rocketport support' CONFIG_ROCKETPORT
+ tristate ' Cyclades async mux support' CONFIG_CYCLADES
+ if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_CYCLADES" != "n" ]; then
+ bool ' Cyclades-Z interrupt mode operation (EXPERIMENTAL)' CONFIG_CYZ_INTR
+ fi
+ tristate ' Digiboard Intelligent Async Support' CONFIG_DIGIEPCA
+ if [ "$CONFIG_DIGIEPCA" = "n" ]; then
+ tristate ' Digiboard PC/Xx Support' CONFIG_DIGI
+ fi
+ tristate ' Hayes ESP serial port support' CONFIG_ESPSERIAL
+ tristate ' Moxa Intellio support' CONFIG_MOXA_INTELLIO
+ tristate ' Moxa SmartIO support' CONFIG_MOXA_SMARTIO
+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ dep_tristate ' Multi-Tech multiport card support (EXPERIMENTAL)' CONFIG_ISI m
+ fi
+ tristate ' Microgate SyncLink card support' CONFIG_SYNCLINK
+ tristate ' HDLC line discipline support' CONFIG_N_HDLC
+ tristate ' SDL RISCom/8 card support' CONFIG_RISCOM8
+ tristate ' Specialix IO8+ card support' CONFIG_SPECIALIX
+ if [ "$CONFIG_SPECIALIX" != "n" ]; then
+ bool ' Specialix DTR/RTS pin is RTS' CONFIG_SPECIALIX_RTSCTS
+ fi
+ tristate ' Specialix SX (and SI) card support' CONFIG_SX
+ tristate ' Specialix RIO system support' CONFIG_RIO
+ if [ "$CONFIG_RIO" != "n" ]; then
+ bool ' Support really old RIO/PCI cards' CONFIG_RIO_OLDPCI
+ fi
+ bool ' Stallion multiport serial support' CONFIG_STALDRV
+ if [ "$CONFIG_STALDRV" = "y" ]; then
+ tristate ' Stallion EasyIO or EC8/32 support' CONFIG_STALLION
+ tristate ' Stallion EC8/64, ONboard, Brumby support' CONFIG_ISTALLION
+ fi
+ if [ "$CONFIG_MIPS" = "y" ]; then
+ bool ' TMPTX3912/PR31700 serial port support' CONFIG_SERIAL_TX3912
+ dep_bool ' Console on TMPTX3912/PR31700 serial port' CONFIG_SERIAL_TX3912_CONSOLE $CONFIG_SERIAL_TX3912
+ bool ' Enable Au1000 UART Support' CONFIG_AU1000_UART
+ if [ "$CONFIG_AU1000_UART" = "y" ]; then
+ bool ' Enable Au1000 serial console' CONFIG_AU1000_SERIAL_CONSOLE
fi
fi
fi
|
