Configrom errors on plugin
Brought to you by:
aeb,
bencollins
Menu
▾
▴
#646 Configrom errors on plugin
When I turn on an ATAPI disk in a Firewire carrier, the
operation always fails. Syslog says:
ieee1394: Error parsing configrom for node 0-00:1023
Aug 18 02:34:45 umbra kernel: ieee1394: sbp2: Error
logging into SBP-2 device - login timed-out
Aug 18 02:34:45 umbra kernel: sbp2: probe of
0050c564e0006a03-1 failed with error -16
And Messages says:
Aug 18 02:33:32 umbra kernel: ieee1394: raw1394:
/dev/raw1394 device initialized
Aug 18 02:34:24 umbra kernel: scsi1 : SCSI emulation
for IEEE-1394 SBP-2 Devices
Aug 18 02:38:14 umbra kernel: scsi2 : SCSI emulation
for IEEE-1394 SBP-2 Devices
We're running Linux 2.6.8.1, ieee1394 compiled in,
libraw0.10.1,
using OHCI, /proc/bus lacks any 1394 entry, adapter is
VIA VT6307 (said to work great), DMESG gives no
relevant info.
LSPCI gives
00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM
Controller/Host-Hub Interface (rev 02)
00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP
Controller (rev 02)
00:1d.0 USB Controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corp. 82801EB/ER
(ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub
interface to PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R)
LPC Bridge (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801EB/ER
(ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R)
SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp.
82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation
NV34 [GeForce FX 5200] (rev a1)
02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc.
IEEE 1394 Host Controller (rev 80)
02:05.0 Ethernet controller: Marvell Yukon Gigabit
Ethernet 10/100/1000Base-T Adapter (rev 13)
I'm sure this is a simple configuration problem but
I've been over the instructions several times and don't
see what I'm missing.
Any help would be great. I have lots of Firewire stuff
and hope to use it all with Linux.
I've attached the .config for the running kernel.
I apologize in advance if I should have followed some
other path for assistance; the web page suggested I do
this.
Thanks in advance.
Fred Watkins
fw891@hyperlogic.com
.config for running kernel