#603 SIIG dual usb2/firewire card "almost" working

[David A. Desrosiers]

I'm trying to get this SIIG usb2.0/firewire
card working with 2.4.x
(tried from .21 to .27-pre3) or 2.6.x (tried 2.6.1 to
2.6.6), without luck.
The USB portion of the card works fine, no issues, but
the firewire portion
doesn't want to see my firewire drive (the drive works
on another system
with a firewire pci card).

The card model is a US2311, dual usb/firewire
card from SIIG. You
can see a picture of it over here:

http://siig.com/product.asp?query=us2311&x=0&y=0&mode=both&pid=302&catid=10&subcatid=95

Here is the error I get when loading sbp2:

May 29 17:20:42 wrath kernel: sbp2: $Rev$ Ben Collins
<bcollins@debian.org>
May 29 17:20:42 wrath kernel: scsi0 : SCSI emulation
for IEEE-1394 SBP-2
Devices
May 29 17:20:42 wrath kernel: blk: queue dc19ce74, I/O
limit 0Mb (mask 0x0)
May 29 17:20:42 wrath kernel: ieee1394: sbp2: Node
0-00:1023: Using 36byte
inquiry workaround
May 29 17:20:43 wrath kernel: ieee1394: send packet
400: ffc0e110 ffc1ffff
f0010020 00080000
May 29 17:20:43 wrath kernel: ohci1394_0: Inserting
packet for node
0-00:1023, tlabel=56, tcode=0x1, speed=2
May 29 17:20:43 wrath kernel: ohci1394_0: Waking
transmit DMA ctx=0
May 29 17:20:43 wrath kernel: ohci1394_0: IntEvent:
00000001
May 29 17:20:43 wrath kernel: ohci1394_0: Got
reqTxComplete interrupt
status=0x00008011
May 29 17:20:43 wrath kernel: ohci1394_0: Packet sent
to node 0 tcode=0x1
tLabel=56 ack=0x11 spd=0 dataLength=8 ctx=0
May 29 17:21:03 wrath kernel: ieee1394: sbp2: Error
logging into SBP-2
device - login timed-out

What other info can I provide to help figure
this out? I tried the
latest drivers from linux1394, and I have SCSI cdrom
support enabled (as a
module) in the kernel. I've tried loading and unloading
the modules, that
didn't seem to help either. Is there anything else I
can provide? Maybe add
some more printk to the drivers?

Let me know, if you can. I'd love to get this
card working.