(no subject)
Brought to you by:
aeb,
bencollins
From: Marco B. <be...@ma...> - 2002-10-29 22:33:46
|
Hello, I apologize in advance for my newbieness. I have a Dazzle(tm) card that converts analog video to digital and viceversa; it is a breakout box connected to the computer through two cables. one is a ieee1394 and the other is something else (through which the device receives the power line). It looks like an extended serial connector with more pins (but smaller than a parallel). It came with a Dell dimension 8200 and I think it is a OEM product because it looks different from anything from the Dazzle website. Needless to say, it works under XP home, but I'd like it in Mandrake 9. I'd need some direction from more experienced users to sort this out. Thank you for your help Hereafter is all information I deem pertinent rpm -qa | grep 1394 libraw1394_5-0.9.0-1mdk libavc1394_0-0.4.1-1mdk lsmod Module Size Used by Tainted: P loop 11376 0 (autoclean) sg 31276 0 (autoclean) isofs 25652 1 (autoclean) inflate_fs 17892 0 (autoclean) [isofs] udf 85472 0 (autoclean) raw1394 7004 0 sr_mod 15096 2 (autoclean) floppy 49340 0 (autoclean) parport_pc 21672 1 (autoclean) lp 6720 0 (autoclean) parport 23936 1 (autoclean) [parport_pc lp] agpgart 31840 3 (autoclean) NVdriver 1065920 10 (autoclean) snd-seq-midi 3680 0 (autoclean) (unused) snd-emu10k1-synth 4220 0 (autoclean) (unused) snd-emux-synth 25532 0 (autoclean) [snd-emu10k1-synth] snd-seq-midi-emul 4880 0 (autoclean) [snd-emux-synth] snd-seq-virmidi 2888 0 (autoclean) [snd-emux-synth] snd-seq-oss 26176 0 (unused) snd-seq-midi-event 3208 0 [snd-seq-midi snd-seq-virmidi snd-seq-oss] snd-seq 33264 2 [snd-seq-midi snd-emux-synth snd-seq-midi-emul snd-seq-virmidi snd-seq-oss snd-seq-midi-event] snd-pcm-oss 36932 0 snd-mixer-oss 9016 0 [snd-pcm-oss] snd-emu10k1 56592 0 [snd-emu10k1-synth] snd-pcm 55808 0 [snd-pcm-oss snd-emu10k1] snd-timer 9964 0 [snd-seq snd-pcm] snd-util-mem 1280 0 [snd-emux-synth snd-emu10k1] snd-rawmidi 12864 0 [snd-seq-midi snd-seq-virmidi snd-emu10k1] snd-seq-device 3836 0 [snd-seq-midi snd-emu10k1-synth snd-emux-synth snd-seq-oss snd-seq snd-emu10k1 snd-rawmidi] snd-ac97-codec 25508 0 [snd-emu10k1] snd-hwdep 3840 0 [snd-emu10k1] snd 24804 0 [snd-seq-midi snd-emux-synth snd-seq-virmidi snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-emu10k1 snd-pcm snd-timer snd-util-mem snd-rawmidi snd-seq-device snd-ac97-codec snd-hwdep] soundcore 3780 0 [snd] nfsd 66576 0 (autoclean) lockd 46480 0 (autoclean) [nfsd] sunrpc 60188 0 (autoclean) [nfsd lockd] ip_vs 74328 0 (autoclean) af_packet 13000 0 (autoclean) 8139too 14472 1 (autoclean) mii 1152 0 (autoclean) [8139too] ohci1394 16812 0 ieee1394 31532 0 [raw1394 ohci1394] nls_cp850 3580 1 (autoclean) vfat 9588 1 (autoclean) fat 31864 0 (autoclean) [vfat] nls_iso8859-1 2844 6 (autoclean) ntfs 72908 1 (autoclean) supermount 14340 2 (autoclean) ide-cd 28712 0 cdrom 26848 0 [sr_mod ide-cd] ide-scsi 8212 1 scsi_mod 90372 3 [sg sr_mod ide-scsi] usb-uhci 21676 0 (unused) usbcore 58304 1 [usb-uhci] rtc 6560 0 (autoclean) I also have kino, gscanbus (I tried dvgrab but it just captures nothing). kino does start but it captures nothing, even when a source is connected to the breakout box (I used an ordinary VCR, same setting that works in windows) gscanbus shows me one icon and clicking it I get SelfID Info ----------- Physical ID: 0 Link active: Yes Gap Count: 63 PHY Speed: S400 PHY Delay: <=144ns IRM Capable: Yes Power Class: None Port 0: Not connected Port 1: Not connected Port 2: Not connected Init. reset: Yes CSR ROM Info ------------ GUID: 0x25F3030000323014 Node Capabilities: 0x000083C0 Vendor ID: 0x00000000 Unit Spec ID: 0x00000000 Unit SW Version: 0x00000000 Model ID: 0x00000000 Nr. Textual Leafes: 1 Vendor: XEROX CORPORATION Textual Leafes: Linux OHCI-1394 AV/C Subunits ------------- N/A Here is lspci: 00:00.0 Host bridge: Intel Corp. 82850 850 (Tehama) Chipset Host Bridge (MCH) (rev 04) 00:01.0 PCI bridge: Intel Corp. 82850 850 (Tehama) Chipset AGP Bridge (rev 04) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA PCI Bridge (rev 04) 00:1f.0 ISA bridge: Intel Corp. 82801BA ISA Bridge (LPC) (rev 04) 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 04) 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 04) 00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 04) 00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #2) (rev 04) 01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX420] (rev a3) 02:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev 10) 02:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a) 02:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 0a) 02:0a.0 PCI bridge: Hint Corp HB1-SE33 PCI-PCI Bridge (rev 13) 03:00.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) 03:08.0 Multimedia controller: C-Cube Microsystems E4? (rev b1) |