Re: Ann : Capture & Ether1394
Brought to you by:
aeb,
bencollins
From: <fra...@ya...> - 2000-05-24 11:18:13
|
--- fir...@se... a écrit : > > > On Tue, 23 May 2000, [iso-8859-1] Franck Bonin > wrote: > > > You should insmod the IEEE 1394 subsystem modules > > (ieee1394.o and > > ohci1394.o) FIRST on ALL the machines. > > > > And then insmod eth1394.o and ifup interfaces on > all > > the machines. > > > > This will fix the problem with HW address. > > Ok, I did the following: > > Machine 1: > insmod ieee1394.o > insmod pcilynx.o > insmod raw1394.o > > Machine 2: > insmod ieee1394.o > insmod pcilynx.o > insmod raw1394.o > > Machine 1: > insmod eth1394.o > ifup eth3 > > Machine 2: > insmod eth1394.o > ifup eth3 > > Now when I do a ifconfig eth3 I get: > > Machine 1: > eth3 Link encap:Ethernet HWaddr 00:00:69:65:65:00 > inet addr:192.168.3.10 Bcast:192.168.3.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:186 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > > Machine 2: > eth3 Link encap:Ethernet HWaddr 00:00:69:65:65:00 > inet addr:192.168.3.11 Bcast:192.168.3.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:186 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:100 > > This driver does not rely on any type of card does > it? > > Judd Tracy > jt...@is... > This is very strange because the last byte of each HW address should be the node number. See line 481 of file eth1384.c : dev->dev_addr[ETH_ALEN-1] = priv->host->node_id & 0x3f; This should works but I haven't tested with pcilynx driver... So I may ask few questions : 1/ Are nodes numbers correctly generated ? (See with gscanbus) 1.1/ If yes, is eth1394 find your card ? (See with dmesg when you insmod eth1394 and send me the output if you want) Card detection is handle by function add_host(), line 354 and cards found are used by function ether1394_init(), near line 735. 1.2/ If no, did you try with the modules I have include with eth1394 archive ? 2/ If the driver init correctly except for HW address, you could assign one to each node yourself line 481. ----- Franck Bonin ___________________________________________________________ Do You Yahoo!? Achetez, vendez! À votre prix! Sur http://encheres.yahoo.fr |