Re: chained devices

[Eric H. <Eri...@xi...>]

Actually it is the closest device, since when you chain devices together it
starts with the farthest node and works its way back to the root node.  In other
words node 0 works but node 1 doesn't and the root nodeID is 2.  Yes both
devices will work if they are connected directly to an individual controler, but
i wish to chain more than two devices when im finished.

Mark Knecht wrote:

> Eric,
>    I assume that the device that is not working is the distant device in the
> daisy chain? Does the setup work if both devices are connected directly to
> the OHCI controller? (Presuming that you card has at least two ports...)
>
> Mark
>
> -----Original Message-----
> From: Eric Hammervold [mailto:Eri...@xi...]
> Sent: Tuesday, March 14, 2000 2:37 PM
> To: lin...@li...
> Subject: chained devices
>
> Im running into a problem with using two devices in a daisy chain
> configuration.  I can talk with one device but when i try to talk to the
> other it ignores the data.  These devices are completely identical.  Any
> ideas on what my problem may be?
>
> _______________________________________________
> mailing list lin...@li...
> http://lists.sourceforge.net/mailman/listinfo/linux1394-devel