Error when running dvgrab and gscanbus

[Morten M. <mm...@cl...>]

When I try a make with the libraw I get:

make  all-recursive
make[1]: Entering directory `/usr/src/libraw1394-0.8.2'
Making all in src
make[2]: Entering directory `/usr/src/libraw1394-0.8.2/src'
/bin/sh ../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I..     -g
-O2 -Wall -Wunused -c main.c
rm -f .libs/main.lo
gcc -DHAVE_CONFIG_H -I. -I. -I.. -g -O2 -Wall -Wunused -c  -fPIC -DPIC
main.c -o .libs/main.lo
In file included from main.c:19:
kernel-raw1394.h:49:23: asm/types.h: No such file or directory
make[2]: *** [main.lo] Error 1
make[2]: Leaving directory `/usr/src/libraw1394-0.8.2/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/usr/src/libraw1394-0.8.2'
make: *** [all-recursive-am] Error 2





after

insmod ohci1394
insmod raw1394
lsmod

I get the following:
Module                  Size  Used by
raw1394                 6608   0  (unused)
ohci1394               23040   0  (unused)
hisax                 137168   3 
ne2k-pci                4800   1  (autoclean)
8390                    6352   0  (autoclean) [ne2k-pci]
es1371                 25712   0 
soundcore               3952   4  [es1371]
ac97_codec              7824   0  [es1371]

Now, when I try to run ./gscanbus I get:
successfully got handle
current generation number: 1
using first card found: 1 nodes on bus, local ID is 0
Error: invalid or unsupported selfid format!

and when I try dvgrab test:
raw1394 - couldn't get card info: Invalid argument

a cat /proc/ohci1394 gives:

IEEE-1394 OHCI Driver status report:
  bus number: 0x3ff Node ID: 0x0
  
  ### Host data ###
  node_count:        2  node_id   : 0000FFC0
  irm_id    : 0000FFC1  busmgr_id : 0000FFFF
  initialized  
     
  
  ---Iso Receive DMA---
  Current buf: 0 offset: 0
  
  ---Async Receive DMA---
  Ar req current buf: 0 offset: 112
  AR resp current buf: 0 offset: 0
  
  ---Async Transmit DMA---
  AT req prg: 3 sent: 3 free: 32 branchAddrPtr: caa82008
  AT req queue: first: 00000000 last: 00000000
  AR resp prg: 0 sent: 0 free: 32 branchAddrPtr: 00000000
  AT resp queue: first: 00000000 last: 00000000
  
  ### HC Register dump ###
  Version     : 01010000  GUID_ROM    : 00000000  ATRetries   : 00000822
  CSRData     : 00000000  CSRCompData : 00000000  CSRControl  : 80000000
  ConfigROMhdr: 04047d8a  BusID       : 31333934  BusOptions  : f07da002
  GUIDHi      : 08002856  GUIDLo      : 00000075  ConfigROMmap: 07d3c000
  PtdWrAddrLo : 00000000  PtdWrAddrHi : 00000000  VendorID    : 00000000
  HCControl   : 000e0000  SelfIDBuffer: 07d4c000  SelfIDCount : 0007001c
  IRMuChMaskHi: 00000000  IRMuChMaskLo: 00000000  IntEvent    : 00700000
  IntMask     : 840300ff  IsoXmIntEvnt: 00000000  IsoXmIntMask: 00000000
  IsoRcvIntEvt: 00000000  IsoRcvIntMsk: 00000001  FairnessCtrl: 00000000
  LinkControl : 00300200  NodeID      : 8800ffc0  PhyControl  : 000001ff
  IsoCyclTimer: 400c5242  AsRqFilterHi: ffffffff  AsRqFilterLo: ffffffff
  PhyReqFiltHi: ffffffff  PhyReqFiltLo: ffffffff  PhyUpperBnd : 00000000
  AsRqTrCxtCtl: 0000801e  AsRqTrCmdPtr: 0aa82002  AsRsTrCtxCtl: 00000000
  AsRsTrCmdPtr: 00000000  AsRqRvCtxCtl: 00008409  AsRqRvCmdPtr: 07d50001
  AsRsRvCtxCtl: 00008400  AsRsRvCmdPtr: 07e2b001  IntEvent    : 00700000
  IsoRCtxCtl00: d0008400  IsoRCmdPtr00: 01ac3001  IsoRCxtMch00: f0000000
  IsoRCtxCtl01: 00000000  IsoRCmdPtr01: 00000000  IsoRCxtMch01: 00000000
  IsoRCtxCtl02: 00000000  IsoRCmdPtr02: 00000000  IsoRCxtMch02: 00000000
  IsoRCtxCtl03: 00000000  IsoRCmdPtr03: 00000000  IsoRCxtMch03: 00000000
  IsoTCtxCtl00: 00000000  IsoTCmdPtr00: 00000000
  IsoTCtxCtl01: 00000000  IsoTCmdPtr01: 00000000
  IsoTCtxCtl02: 00000000  IsoTCmdPtr02: 00000000
  IsoTCtxCtl03: 00000000  IsoTCmdPtr03: 00000000
  IsoTCtxCtl04: 00000000  IsoTCmdPtr04: 00000000
  IsoTCtxCtl05: 00000000  IsoTCmdPtr05: 00000000
  IsoTCtxCtl06: 00000000  IsoTCmdPtr06: 00000000
  IsoTCtxCtl07: 00000000  IsoTCmdPtr07: 00000000
  
Does anybody know what's wrong?