problems during testing stage of getting started

[David S. P. <pa...@cs...>]

Hi,

I'm having some trouble at the "Testing" stage of getting started and
would appreciate any suggestions. The details are enclosed below.

--
Scott Page

--------------------------------------------------------------------------
kernel version: 2.2.18 (2.2.17 patches applied - manual apply of two
makefile hunk rejects, and removal of set_connect_state, BUG,
get_order, dma_addr_t definitions from lunix22compat.h)
--------------------------------------------------------------------------
ieee1394 version: CVS, December 13 (latest entry appears to be
/ohci1394.c/1.49/Wed Dec 13 05:59:58 2000//)
--------------------------------------------------------------------------
libraw version: libraw1394-0.7
driver: OHCI
--------------------------------------------------------------------------
dmsg:

raw1394: /dev/raw1394 device initialized
ieee1394: registered ohci1394 driver, initializing now
ohci1394: looking for Ohci1394 cards
ohci1394_0: remapped memory spaces reg 0xc8095000
ohci1394_0: allocated interrupt 5
ohci1394_0: soft reset finished
ohci1394_0: max packet size = 2048 bytes
ohci1394_0: 4 iso receive contexts available
ohci1394_0: 8 iso transmit contexts available
ohci1394_0: Receive DMA ctx=0 initialized
ohci1394_0: Receive DMA ctx=1 initialized
ohci1394_0: AT dma ctx=0 initialized
ohci1394_0: AT dma ctx=1 initialized
ohci1394_0: Receive DMA ctx=2 initialized
ohci1394_0: resetting bus on request
ieee1394: detected 1 ohci1394 adapter 
--------------------------------------------------------------------------
#  cat /proc/ohci1394 
IEEE-1394 OHCI Driver status report:
  bus number: 0x3ff Node ID: 0x3f

### Host data ###
node_count:        0  node_id   : 00000000  <- node count 0 is discouraging
irm_id    : 0000FFFF  busmgr_id : 0000FFFF
initialized in_bus_reset 
...   
--------------------------------------------------------------------------
Adapter hardware:
 ADS 1394 DV
 API-1394-PCI
 260017-001-02 B1

 98FLD7T
 TSB41LV03

 97A0J1J
 TSB12LV23
 F711958A
--------------------------------------------------------------------------
# lspci
...
00:09.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8011
...
--------------------------------------------------------------------------
# ./testlibraw
successfully got handle
current generation number: 0
1 card(s) found
  nodes on bus:  0, card name: ohci1394
using first card found: 0 nodes on bus, local ID is 0

doing transactions with custom tag handler

using standard tag handler and synchronous calls

testing FCP monitoring on local node
got fcp command from node 0 of 8 bytes: 01 23 45 67 89 ab cd ef
got fcp response from node 0 of 8 bytes: 01 23 45 67 89 ab cd ef

polling for leftover messages
--------------------------------------------------------------------------