Re: Flexradio Flex-3000 supported?

[Stefan R. <st...@s5...>]

On Feb 14 Christof Bodner wrote:
> oe8bck@shack-pc ~ $ lsmod | grep firewire
> snd_firewire_lib       32768  1 snd_dice
> snd_pcm               106496  7 
> snd_firewire_lib,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_dice,snd_hda_core
> snd_rawmidi            32768  3 snd_firewire_lib,snd_dice,snd_seq_midi
> firewire_ohci          40960  0
> firewire_core          65536  3 snd_firewire_lib,firewire_ohci,snd_dice
> crc_itu_t              16384  1 firewire_core
> oe8bck@shack-pc ~ $ grep . /sys/bus/firewire/devices/fw*/*_name
> /sys/bus/firewire/devices/fw0/model_name:Juju
> /sys/bus/firewire/devices/fw0/vendor_name:Linux Firewire
> /sys/bus/firewire/devices/fw1.0/model_name:FLEX-3000
> /sys/bus/firewire/devices/fw1/model_name:FLEX-3000
> /sys/bus/firewire/devices/fw1/vendor_name:FlexRadio_Systems
[...]

The ALSA/FireWire driver "snd-dice" is loaded.  Was it bound to fw1.0?
$ ls /sys/bus/firewire/drivers/*
$ tree /sys/bus/firewire/devices/fw1
$ crpp < /sys/bus/firewire/devices/fw1/config_rom
(The last command is part of linux-firewire-utils but can also be
downloaded separately from https://me.in-berlin.de/~s5r6/linux1394/utils/.
It shows a few device identifiers and parameters in a somewhat
human-readable form.)

If snd-dice accessed the device successfully, then there should be an ALSA
soundcard for the Flex-3000.
$ alsa-info.sh
(writes a lot of diagnostics about all present soundcards into a temporary
file)
-- 
Stefan Richter
-======----= --=- -====
http://arcgraph.de/sr/