Re: Flexradio Flex-3000 supported?
Brought to you by:
aeb,
bencollins
From: David R. <dr...@tr...> - 2017-02-15 01:34:14
|
Hello Christof, David KI6ZHD here and I've been a long time lurker of the 1394 list. Anyway, what application are you thinking of using with your Flex? As far as I know, no Linux SDR application supports Flex as they have been a closed platform. The only program that I'm aware that supports the Flex is their PowerSDR program for MS Windows (only). --David On 02/14/2017 10:59 AM, Christof Bodner wrote: > Hi Firewire community! > > I just got a used HAM transmitter radio with Firewire interface. It is a > very nice piece, but currently I can use it only with Windows. That's > not nice, because I am using Linux since 20 years (not kidding) > > If I plug the radio, this is the setting and messages I get: > > --- > [ 62.065675] firewire_core 0000:06:00.0: rediscovered device fw0 > [ 62.065703] firewire_core 0000:06:00.0: phy config: new root=ffc1, > gap_count=5 > [ 63.842817] firewire_core 0000:06:00.0: phy config: new root=ffc1, > gap_count=5 > [ 67.152374] firewire_core 0000:06:00.0: created device fw1: GUID > 001c2d0400bfffff, S400 > --- > oe8bck@shack-pc ~ $ ls -l /dev/fw* > crw------- 1 root root 248, 0 Feb 14 2017 /dev/fw0 > crw------- 1 root audio 248, 1 Feb 14 19:28 /dev/fw1 > oe8bck@shack-pc ~ $ lspci | grep -i FireWire > 06:00.0 FireWire (IEEE 1394): Texas Instruments XIO2200A IEEE-1394a-2000 > Controller (PHY/Link) (rev 01) > oe8bck@shack-pc ~ $ lsmod | grep firewire > snd_firewire_lib 32768 1 snd_dice > snd_pcm 106496 7 > snd_firewire_lib,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_dice,snd_hda_core > snd_rawmidi 32768 3 snd_firewire_lib,snd_dice,snd_seq_midi > firewire_ohci 40960 0 > firewire_core 65536 3 snd_firewire_lib,firewire_ohci,snd_dice > crc_itu_t 16384 1 firewire_core > oe8bck@shack-pc ~ $ grep . /sys/bus/firewire/devices/fw*/*_name > /sys/bus/firewire/devices/fw0/model_name:Juju > /sys/bus/firewire/devices/fw0/vendor_name:Linux Firewire > /sys/bus/firewire/devices/fw1.0/model_name:FLEX-3000 > /sys/bus/firewire/devices/fw1/model_name:FLEX-3000 > /sys/bus/firewire/devices/fw1/vendor_name:FlexRadio_Systems > --- > > Well, it is somehow recognized, but now I am stuck a little bit. Where > to proceed? How to get the audio tx/rx? I did search for some kind of > how-to's but did not find any. Could anybody help me? > > KR, > Christof > |