Linux hates my camcorder

[Adam G. <ad...@po...>]

Hi,

I'm trying to capture video from a Sony DCR-TRV120. When I turn it on, I 
get a continuous loop of the following messages on the console:

Jun 24 19:00:06 starship kernel: [  845.491993] firewire_ohci 0000:09:00.0: node ID not valid, new bus reset in progress
Jun 24 19:00:07 starship kernel: [  846.632134] firewire_core 0000:09:00.0: rediscovered device fw0
Jun 24 19:00:07 starship kernel: [  846.718717] firewire_core 0000:09:00.0: rediscovered device fw1
Jun 24 19:00:07 starship kernel: [  846.718799] firewire_core 0000:09:00.0: phy config: new root=ffc1, gap_count=5
Jun 24 19:00:07 starship kernel: [  846.718950] firewire_ohci 0000:09:00.0: node ID not valid, new bus reset in progress
Jun 24 19:00:08 starship kernel: [  847.860130] firewire_core 0000:09:00.0: rediscovered device fw0
Jun 24 19:00:08 starship kernel: [  847.946744] firewire_core 0000:09:00.0: rediscovered device fw1
Jun 24 19:00:08 starship kernel: [  847.946834] firewire_core 0000:09:00.0: phy config: new root=ffc1, gap_count=5

This is with a fresh Debian 8.5 install and the vendor kernel. uname
output is:

Linux starship 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) i686 Linux

I'm using an IBM 19K5680 (FRU 19K5686) CardBus host adapter with PCI ID
104c:8019 and the following lspci output:

09:00.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 IEEE-1394 Controller

This camcorder worked OK with the old drivers and a TI-based PCI card 10
years ago. I confirmed that its FireWire port is still functional and
that this host adapter works with other video devices.

Any suggestions?

-- Adam