Re: isochronous cycle inconsistent
Brought to you by:
aeb,
bencollins
From: Carl K. <ca...@pe...> - 2011-12-17 18:35:53
|
On Sat, Dec 17, 2011 at 11:21 AM, Stefan Richter <st...@s5...> wrote: > On Dec 16 Carl Karsten wrote: >> On Fri, Dec 16, 2011 at 2:53 AM, Clemens Ladisch <cl...@la...> wrote: >> > Carl Karsten wrote: >> >> [ 112.817782] firewire_ohci: isochronous cycle inconsistent >> > >> > FireWire has isochronous transfers, which rely on a common bus time. >> > (AV devices and all host controllers are capable of iso transfers.) >> > To synchronize the time on the bus, one of the iso-capable nodes, the >> > cycle master, broadcasts its current time every 125 µs. >> > >> > As long as the two controllers are not connected, each one is cycle >> > master. When you connect them, one loses its status as cycle master and >> > receives its time from the other one. The resulting change in time is >> > reported as "isochronous cycle inconsistent". This is not a bug when >> > it doesn't happen during normal operation, and the kernel probably >> > shouldn't report it when it is expected. > > firewire-ohci's irq_handler() provides a rather awkward context if we > wanted to determine whether this is expected or not. > > We could make the message conditional on whether there is any IT or IR DMA > context in use. (Better: IT or IR DMA with cycleMatch control flag > enabled, but that would require more code to find out.) See comment in > irq_handler() and OHCI clauses 9.5.1 and 10.5.1. > > Better yet, we just write a cycleInconsistent handler. > >> >> [ 143.392293] firewire_core: giving up on config rom for node id ffc1 >> >> [ 165.404068] firewire_core: giving up on config rom for node id ffc0 >> > >> > Is your problem that the cards don't eventually see each other? >> > >> > >> >> correct. >> >> I also had problems with 2 cams hooked up. I used the loop to remove >> the cams as a source of problem. I'll hook up the cams and post.. > > Please > # echo 3 > /sys/module/firewire_ohci/parameters/debug > before you plug the cameras in or before you plug the two cards together. So this time it didn't error. here is all of dmesg, I am going to reboot and try to get it to error, will post outcome. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-generic (buildd@yellow) (gcc version 4.6.2 (Ubuntu/Linaro 4.6.2-6ubuntu1) ) #10-Ubuntu SMP Sat Dec 10 17:46:09 UTC 2011 (Ubuntu 3.2.0-4.10-generic 3.2.0-rc5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-generic root=UUID=b5c83a0b-baed-4a8b-a828-b65be5fe3d29 ro BOOTIF=01-00-1e-68-09-25-f6 quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bf50000 (usable) [ 0.000000] BIOS-e820: 000000007bf50000 - 000000007bf65000 (ACPI data) [ 0.000000] BIOS-e820: 000000007bf65000 - 000000007bf66000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bf66000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: Hewlett-Packard HP Pavilion dv6700 Notebook PC /30CF, BIOS F.27 01/11/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x7bf50 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f8220] f8220 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000007bf50000 [ 0.000000] 0000000000 - 007be00000 page 2M [ 0.000000] 007be00000 - 007bf50000 page 4k [ 0.000000] kernel direct mapping tables up to 7bf50000 @ 1fffc000-20000000 [ 0.000000] RAMDISK: 3653c000 - 37296000 [ 0.000000] ACPI: RSDP 00000000000f8250 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 000000007bf5c0fb 0006C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 000000007bf649ba 000F4 (v03 NVIDIA MCP67-M 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 000000007bf5c167 087DF (v01 NVIDIA MCP67 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 000000007bf65fc0 00040 [ 0.000000] ACPI: TCPA 000000007bf64aae 00032 (v01 Phoeni x 06040000 TL 00000000) [ 0.000000] ACPI: SRAT 000000007bf64ae0 000A0 (v01 AMD HAMMER 06040000 AMD 00000001) [ 0.000000] ACPI: SSDT 000000007bf64b80 00206 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: MCFG 000000007bf64d86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 000000007bf64dc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 000000007bf64dfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 000000007bf64e62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 000000007bf64e8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] NUMA: Node 0 [0,a0000) + [100000,7bf50000) -> [0,7bf50000) [ 0.000000] Initmem setup node 0 0000000000000000-000000007bf50000 [ 0.000000] NODE_DATA [000000007bf4b000 - 000000007bf4ffff] [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880079600000-ffff88007b5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0007bf50 [ 0.000000] On node 0 totalpages: 507613 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7870 pages used for memmap [ 0.000000] DMA32 zone: 495762 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007bc00000 s82880 r8192 d23616 u1048576 [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 499674 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-generic root=UUID=b5c83a0b-baed-4a8b-a828-b65be5fe3d29 ro BOOTIF=01-00-1e-68-09-25-f6 quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 310000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1967980k/2030912k available (6529k kernel code, 460k absent, 62472k reserved, 6657k data, 916k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2000.383 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.76 BogoMIPS (lpj=8001532) [ 0.004012] pid_max: default: 32768 minimum: 301 [ 0.004042] Security Framework initialized [ 0.004060] AppArmor: AppArmor initialized [ 0.004063] Yama: becoming mindful. [ 0.004359] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005584] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.006149] Mount-cache hash table entries: 256 [ 0.006320] Initializing cgroup subsys cpuacct [ 0.006326] Initializing cgroup subsys memory [ 0.006337] Initializing cgroup subsys devices [ 0.006340] Initializing cgroup subsys freezer [ 0.006342] Initializing cgroup subsys net_cls [ 0.006345] Initializing cgroup subsys blkio [ 0.006354] Initializing cgroup subsys perf_event [ 0.006392] tseg: 007bf80000 [ 0.006395] CPU: Physical Processor ID: 0 [ 0.006397] CPU: Processor Core ID: 0 [ 0.006399] mce: CPU supports 5 MCE banks [ 0.006412] using AMD E400 aware idle routine [ 0.009843] ACPI: Core revision 20110623 [ 0.016016] ftrace: allocating 26889 entries in 106 pages [ 0.020652] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.063262] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 0.064003] Performance Events: AMD PMU driver. [ 0.064003] ... version: 0 [ 0.064003] ... bit width: 48 [ 0.064003] ... generic registers: 4 [ 0.064003] ... value mask: 0000ffffffffffff [ 0.064003] ... max period: 00007fffffffffff [ 0.064003] ... fixed-purpose events: 0 [ 0.064003] ... event mask: 000000000000000f [ 0.064003] Booting Node 0, Processors #1 Ok. [ 0.064003] smpboot cpu 1: start_ip = 98000 [ 0.148058] Brought up 2 CPUs [ 0.148061] Total of 2 processors activated (8001.09 BogoMIPS). [ 0.148056] System has AMD C1E enabled [ 0.148056] Switch to broadcast mode on CPU1 [ 0.148663] Switch to broadcast mode on CPU0 [ 0.148663] devtmpfs: initialized [ 0.149602] EVM: security.selinux [ 0.149605] EVM: security.SMACK64 [ 0.149606] EVM: security.capability [ 0.149683] PM: Registering ACPI NVS region at 7bf65000 (4096 bytes) [ 0.149683] print_constraints: dummy: [ 0.149683] RTC time: 18:24:17, date: 12/17/11 [ 0.149683] NET: Registered protocol family 16 [ 0.152500] Trying to unpack rootfs image as initramfs... [ 0.152500] node 0 link 0: io port [1000, fffff] [ 0.152500] TOM: 0000000080000000 aka 2048M [ 0.152500] node 0 link 0: mmio [a0000, bffff] [ 0.152500] node 0 link 0: mmio [80000000, dfffffff] [ 0.152500] node 0 link 0: mmio [e0000000, efffffff] [ 0.152500] node 0 link 0: mmio [f0000000, fe0bffff] [ 0.152500] bus: [00, ff] on node 0 link 0 [ 0.152500] bus: 00 index 0 [io 0x0000-0xffff] [ 0.152500] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.152500] bus: 00 index 2 [mem 0x80000000-0xfcffffffff] [ 0.152500] ACPI: bus type pci registered [ 0.152500] PCI: MMCONFIG for domain 0000 [bus 00-04] at [mem 0xe0000000-0xe04fffff] (base 0xe0000000) [ 0.152500] PCI: MMCONFIG at [mem 0xe0000000-0xe04fffff] reserved in E820 [ 0.152500] PCI: Using configuration type 1 for base access [ 0.152500] bio: create slab <bio-0> at 0 [ 0.152500] ACPI: Added _OSI(Module Device) [ 0.152500] ACPI: Added _OSI(Processor Device) [ 0.152500] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.152500] ACPI: Added _OSI(Processor Aggregator Device) [ 0.152505] ACPI: EC: Look up EC in DSDT [ 0.156397] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.157298] ACPI: Interpreter enabled [ 0.157303] ACPI: (supports S0 S3 S4 S5) [ 0.157325] ACPI: Using IOAPIC for interrupt routing [ 0.165226] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.165554] ACPI: No dock devices found. [ 0.165557] HEST: Table not found. [ 0.165561] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.165722] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.165885] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.165888] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.165891] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.165894] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] [ 0.165897] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] [ 0.165900] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] [ 0.165903] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] [ 0.165906] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] [ 0.165909] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.165912] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.165915] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.165918] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] [ 0.165921] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] [ 0.165924] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] [ 0.165927] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] [ 0.165930] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] [ 0.165933] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 0.165937] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] [ 0.165945] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cf3ff]) [ 0.165950] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000d3fff] (conflicts with Adapter ROM [mem 0x000cf800-0x000d0fff]) [ 0.165978] pci 0000:00:00.0: [10de:0547] type 0 class 0x000500 [ 0.166141] pci 0000:00:01.0: [10de:0548] type 0 class 0x000601 [ 0.166192] pci 0000:00:01.1: [10de:0542] type 0 class 0x000c05 [ 0.166205] pci 0000:00:01.1: reg 10: [io 0x3080-0x30bf] [ 0.166223] pci 0000:00:01.1: reg 20: [io 0x3040-0x307f] [ 0.166230] pci 0000:00:01.1: reg 24: [io 0x3000-0x303f] [ 0.166253] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.166259] pci 0000:00:01.1: PME# disabled [ 0.166273] pci 0000:00:01.2: [10de:0541] type 0 class 0x000500 [ 0.166325] pci 0000:00:01.3: [10de:0543] type 0 class 0x000b40 [ 0.166342] pci 0000:00:01.3: reg 10: [mem 0xf6200000-0xf627ffff] [ 0.166452] pci 0000:00:02.0: [10de:055e] type 0 class 0x000c03 [ 0.166463] pci 0000:00:02.0: reg 10: [mem 0xf6486000-0xf6486fff] [ 0.166499] pci 0000:00:02.0: supports D1 D2 [ 0.166502] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166506] pci 0000:00:02.0: PME# disabled [ 0.166520] pci 0000:00:02.1: [10de:055f] type 0 class 0x000c03 [ 0.166532] pci 0000:00:02.1: reg 10: [mem 0xf6489000-0xf64890ff] [ 0.166574] pci 0000:00:02.1: supports D1 D2 [ 0.166576] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166580] pci 0000:00:02.1: PME# disabled [ 0.166602] pci 0000:00:04.0: [10de:055e] type 0 class 0x000c03 [ 0.166612] pci 0000:00:04.0: reg 10: [mem 0xf6487000-0xf6487fff] [ 0.166648] pci 0000:00:04.0: supports D1 D2 [ 0.166651] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166655] pci 0000:00:04.0: PME# disabled [ 0.166669] pci 0000:00:04.1: [10de:055f] type 0 class 0x000c03 [ 0.166681] pci 0000:00:04.1: reg 10: [mem 0xf6489400-0xf64894ff] [ 0.166722] pci 0000:00:04.1: supports D1 D2 [ 0.166724] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.166728] pci 0000:00:04.1: PME# disabled [ 0.166750] pci 0000:00:06.0: [10de:0560] type 0 class 0x000101 [ 0.166776] pci 0000:00:06.0: reg 20: [io 0x30c0-0x30cf] [ 0.166813] pci 0000:00:07.0: [10de:055c] type 0 class 0x000403 [ 0.166826] pci 0000:00:07.0: reg 10: [mem 0xf6480000-0xf6483fff] [ 0.166867] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.166870] pci 0000:00:07.0: PME# disabled [ 0.166893] pci 0000:00:08.0: [10de:0561] type 1 class 0x000604 [ 0.166937] pci 0000:00:09.0: [10de:0550] type 0 class 0x000101 [ 0.166948] pci 0000:00:09.0: reg 10: [io 0x30f0-0x30f7] [ 0.166954] pci 0000:00:09.0: reg 14: [io 0x30e4-0x30e7] [ 0.166960] pci 0000:00:09.0: reg 18: [io 0x30e8-0x30ef] [ 0.166965] pci 0000:00:09.0: reg 1c: [io 0x30e0-0x30e3] [ 0.166971] pci 0000:00:09.0: reg 20: [io 0x30d0-0x30df] [ 0.166977] pci 0000:00:09.0: reg 24: [mem 0xf6484000-0xf6485fff] [ 0.167018] pci 0000:00:0a.0: [10de:054c] type 0 class 0x000200 [ 0.167031] pci 0000:00:0a.0: reg 10: [mem 0xf6488000-0xf6488fff] [ 0.167037] pci 0000:00:0a.0: reg 14: [io 0x30f8-0x30ff] [ 0.167043] pci 0000:00:0a.0: reg 18: [mem 0xf6489c00-0xf6489cff] [ 0.167049] pci 0000:00:0a.0: reg 1c: [mem 0xf6489800-0xf648980f] [ 0.167077] pci 0000:00:0a.0: supports D1 D2 [ 0.167079] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167084] pci 0000:00:0a.0: PME# disabled [ 0.167104] pci 0000:00:0c.0: [10de:0563] type 1 class 0x000604 [ 0.167132] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167135] pci 0000:00:0c.0: PME# disabled [ 0.167153] pci 0000:00:0d.0: [10de:0563] type 1 class 0x000604 [ 0.167180] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167183] pci 0000:00:0d.0: PME# disabled [ 0.167203] pci 0000:00:12.0: [10de:0531] type 0 class 0x000300 [ 0.167212] pci 0000:00:12.0: reg 10: [mem 0xf5000000-0xf5ffffff] [ 0.167219] pci 0000:00:12.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.167227] pci 0000:00:12.0: reg 1c: [mem 0xf4000000-0xf4ffffff 64bit] [ 0.167235] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.167261] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.167290] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.167310] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.167331] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.167393] pci 0000:02:05.0: [1180:0832] type 0 class 0x000c00 [ 0.167404] pci 0000:02:05.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.167407] pci 0000:02:05.0: MMC cards are now supported by standard SDHCI controller [ 0.167418] pci 0000:02:05.0: reg 10: [mem 0xf6100000-0xf61007ff] [ 0.167468] pci 0000:02:05.0: supports D1 D2 [ 0.167471] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167475] pci 0000:02:05.0: PME# disabled [ 0.167491] pci 0000:02:05.1: [1180:0822] type 0 class 0x000805 [ 0.167505] pci 0000:02:05.1: reg 10: [mem 0xf6100800-0xf61008ff] [ 0.167556] pci 0000:02:05.1: supports D1 D2 [ 0.167558] pci 0000:02:05.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167562] pci 0000:02:05.1: PME# disabled [ 0.167578] pci 0000:02:05.2: [1180:0592] type 0 class 0x000880 [ 0.167593] pci 0000:02:05.2: reg 10: [mem 0xf6101000-0xf61010ff] [ 0.167643] pci 0000:02:05.2: supports D1 D2 [ 0.167646] pci 0000:02:05.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167650] pci 0000:02:05.2: PME# disabled [ 0.167665] pci 0000:02:05.3: [1180:0852] type 0 class 0x000880 [ 0.167680] pci 0000:02:05.3: reg 10: [mem 0xf6101400-0xf61014ff] [ 0.167730] pci 0000:02:05.3: supports D1 D2 [ 0.167732] pci 0000:02:05.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.167736] pci 0000:02:05.3: PME# disabled [ 0.167774] pci 0000:00:08.0: PCI bridge to [bus 02-02] (subtractive decode) [ 0.167779] pci 0000:00:08.0: bridge window [mem 0xf6100000-0xf61fffff] [ 0.167784] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.167787] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.167790] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.167793] pci 0000:00:08.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) [ 0.167797] pci 0000:00:08.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) [ 0.167800] pci 0000:00:08.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) [ 0.167803] pci 0000:00:08.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.167807] pci 0000:00:08.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.167810] pci 0000:00:08.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.167813] pci 0000:00:08.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) [ 0.167816] pci 0000:00:08.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) [ 0.167820] pci 0000:00:08.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) [ 0.167823] pci 0000:00:08.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) [ 0.167826] pci 0000:00:08.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode) [ 0.167830] pci 0000:00:08.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) [ 0.167833] pci 0000:00:08.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 0.167860] pci 0000:00:0c.0: PCI bridge to [bus 04-05] [ 0.167865] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff] [ 0.167868] pci 0000:00:0c.0: bridge window [mem 0xf2000000-0xf3ffffff] [ 0.167873] pci 0000:00:0c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.167914] pci 0000:03:00.0: [168c:001c] type 0 class 0x000200 [ 0.167931] pci 0000:03:00.0: reg 10: [mem 0xf6000000-0xf600ffff 64bit] [ 0.168024] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.168037] pci 0000:00:0d.0: PCI bridge to [bus 03-03] [ 0.168042] pci 0000:00:0d.0: bridge window [mem 0xf6000000-0xf60fffff] [ 0.168055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.168151] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.168175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.168207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.168374] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.168529] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c [ 0.168531] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.192806] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10 [ 0.192926] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11 [ 0.193045] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled. [ 0.193163] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled. [ 0.193281] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.193398] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.193520] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 0.193638] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 0.193756] ACPI: PCI Interrupt Link [LSMB] (IRQs *10) [ 0.193873] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11 [ 0.193991] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7 [ 0.194116] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11 [ 0.194234] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10 [ 0.194352] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10 [ 0.194470] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled. [ 0.194593] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11 [ 0.194711] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5 [ 0.194835] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10 [ 0.194958] ACPI: PCI Interrupt Link [LPMU] (IRQs *11) [ 0.195148] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none [ 0.195158] vgaarb: loaded [ 0.195160] vgaarb: bridge control possible 0000:00:12.0 [ 0.195322] i2c-core: driver [aat2870] using legacy suspend method [ 0.195325] i2c-core: driver [aat2870] using legacy resume method [ 0.195408] SCSI subsystem initialized [ 0.196012] libata version 3.00 loaded. [ 0.196012] usbcore: registered new interface driver usbfs [ 0.196012] usbcore: registered new interface driver hub [ 0.196012] usbcore: registered new device driver usb [ 0.196012] PCI: Using ACPI for IRQ routing [ 0.196012] PCI: pci_cache_line_size set to 64 bytes [ 0.196012] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.196012] reserve RAM buffer: 000000007bf50000 - 000000007bffffff [ 0.196040] NetLabel: Initializing [ 0.196042] NetLabel: domain hash size = 128 [ 0.196044] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.196062] NetLabel: unlabeled traffic allowed by default [ 0.196124] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.196131] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.196136] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.204191] Switching to clocksource hpet [ 0.218942] AppArmor: AppArmor Filesystem Enabled [ 0.218989] pnp: PnP ACPI init [ 0.219011] ACPI: bus type pnp registered [ 0.219493] pnp 00:00: [bus 00-ff] [ 0.219496] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.219499] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.219502] pnp 00:00: [io 0x0d00-0xffff window] [ 0.219505] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.219507] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.219514] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.219517] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.219519] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.219522] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.219525] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.219528] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.219531] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.219533] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.219536] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.219539] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.219542] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.219544] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.219547] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.219550] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.219639] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.219872] pnp 00:01: [irq 0 disabled] [ 0.219887] pnp 00:01: [irq 8] [ 0.219890] pnp 00:01: [mem 0xfed00000-0xfed003ff] [ 0.219938] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.219959] pnp 00:02: [mem 0xe0000000-0xefffffff] [ 0.220080] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved [ 0.220084] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220326] pnp 00:03: [io 0x1000-0x107f] [ 0.220328] pnp 00:03: [io 0x1080-0x10ff] [ 0.220331] pnp 00:03: [io 0x1400-0x147f] [ 0.220333] pnp 00:03: [io 0x1480-0x14ff] [ 0.220336] pnp 00:03: [io 0x1800-0x187f] [ 0.220339] pnp 00:03: [io 0x1880-0x18ff] [ 0.220421] system 00:03: [io 0x1000-0x107f] has been reserved [ 0.220425] system 00:03: [io 0x1080-0x10ff] has been reserved [ 0.220428] system 00:03: [io 0x1400-0x147f] has been reserved [ 0.220431] system 00:03: [io 0x1480-0x14ff] has been reserved [ 0.220435] system 00:03: [io 0x1800-0x187f] has been reserved [ 0.220438] system 00:03: [io 0x1880-0x18ff] has been reserved [ 0.220442] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220459] pnp 00:04: [io 0x0010-0x001f] [ 0.220461] pnp 00:04: [io 0x0022-0x003f] [ 0.220464] pnp 00:04: [io 0x0044-0x005f] [ 0.220466] pnp 00:04: [io 0x0063] [ 0.220469] pnp 00:04: [io 0x0065] [ 0.220471] pnp 00:04: [io 0x0067-0x006f] [ 0.220474] pnp 00:04: [io 0x0072-0x0073] [ 0.220476] pnp 00:04: [io 0x0074-0x007f] [ 0.220479] pnp 00:04: [io 0x0080] [ 0.220481] pnp 00:04: [io 0x0084] [ 0.220483] pnp 00:04: [io 0x0091-0x0093] [ 0.220486] pnp 00:04: [io 0x0097-0x009f] [ 0.220488] pnp 00:04: [io 0x00a2-0x00bf] [ 0.220491] pnp 00:04: [io 0x00e0-0x00ef] [ 0.220494] pnp 00:04: [io 0x0360-0x0361] [ 0.220496] pnp 00:04: [io 0x04d0-0x04d1] [ 0.220582] system 00:04: [io 0x0360-0x0361] has been reserved [ 0.220585] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.220589] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.220610] pnp 00:05: [io 0x0000-0x0008] [ 0.220613] pnp 00:05: [io 0x000a-0x000f] [ 0.220618] pnp 00:05: [io 0x0081-0x0083] [ 0.220621] pnp 00:05: [io 0x0087] [ 0.220623] pnp 00:05: [io 0x0089-0x008b] [ 0.220626] pnp 00:05: [io 0x008f] [ 0.220628] pnp 00:05: [io 0x00c0-0x00d1] [ 0.220631] pnp 00:05: [io 0x00d4-0x00df] [ 0.220633] pnp 00:05: [dma 4] [ 0.220688] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.220700] pnp 00:06: [io 0x0061] [ 0.220747] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.220780] pnp 00:07: [io 0x0070-0x0071] [ 0.220829] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.220842] pnp 00:08: [io 0x00f0-0x00f1] [ 0.220852] pnp 00:08: [irq 13] [ 0.220898] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.220921] pnp 00:09: [io 0x0060] [ 0.220923] pnp 00:09: [io 0x0064] [ 0.220932] pnp 00:09: [irq 1] [ 0.220982] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.221001] pnp 00:0a: [irq 12] [ 0.221060] pnp 00:0a: Plug and Play ACPI device, IDs SYN013b SYN0100 SYN0002 PNP0f13 (active) [ 0.221536] pnp 00:0b: [mem 0xffc00000-0xffffffff] [ 0.221539] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.221541] pnp 00:0b: [mem 0xfee00000-0xfeefffff] [ 0.221544] pnp 00:0b: [mem 0xfed00000-0xfed00fff] [ 0.221547] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.221550] pnp 00:0b: [mem 0xfef00000-0xfef00fff] [ 0.221655] system 00:0b: [mem 0xffc00000-0xffffffff] could not be reserved [ 0.221659] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.221663] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.221666] system 00:0b: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.221670] system 00:0b: [mem 0xfef00000-0xfef00fff] has been reserved [ 0.221674] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.221804] pnp: PnP ACPI: found 12 devices [ 0.221807] ACPI: ACPI bus type pnp unregistered [ 0.228736] PCI: max bus depth: 1 pci_try_num: 2 [ 0.228771] pci 0000:00:12.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref] [ 0.228776] pci 0000:00:08.0: PCI bridge to [bus 02-02] [ 0.228781] pci 0000:00:08.0: bridge window [mem 0xf6100000-0xf61fffff] [ 0.228787] pci 0000:00:0c.0: PCI bridge to [bus 04-05] [ 0.228790] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff] [ 0.228794] pci 0000:00:0c.0: bridge window [mem 0xf2000000-0xf3ffffff] [ 0.228798] pci 0000:00:0c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.228803] pci 0000:00:0d.0: PCI bridge to [bus 03-03] [ 0.228807] pci 0000:00:0d.0: bridge window [mem 0xf6000000-0xf60fffff] [ 0.228819] pci 0000:00:08.0: setting latency timer to 64 [ 0.228825] pci 0000:00:0c.0: setting latency timer to 64 [ 0.228831] pci 0000:00:0d.0: setting latency timer to 64 [ 0.228835] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.228838] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.228841] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.228844] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.228847] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.228850] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.228853] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff] [ 0.228855] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff] [ 0.228858] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff] [ 0.228861] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff] [ 0.228864] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff] [ 0.228867] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff] [ 0.228870] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff] [ 0.228873] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff] [ 0.228876] pci_bus 0000:00: resource 18 [mem 0xfed40000-0xfed44fff] [ 0.228879] pci_bus 0000:00: resource 19 [mem 0x80000000-0xfebfffff] [ 0.228883] pci_bus 0000:02: resource 1 [mem 0xf6100000-0xf61fffff] [ 0.228886] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.228888] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.228891] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.228894] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.228897] pci_bus 0000:02: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.228900] pci_bus 0000:02: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.228903] pci_bus 0000:02: resource 10 [mem 0x000d4000-0x000d7fff] [ 0.228906] pci_bus 0000:02: resource 11 [mem 0x000d8000-0x000dbfff] [ 0.228909] pci_bus 0000:02: resource 12 [mem 0x000dc000-0x000dffff] [ 0.228912] pci_bus 0000:02: resource 13 [mem 0x000e0000-0x000e3fff] [ 0.228915] pci_bus 0000:02: resource 14 [mem 0x000e4000-0x000e7fff] [ 0.228918] pci_bus 0000:02: resource 15 [mem 0x000e8000-0x000ebfff] [ 0.228921] pci_bus 0000:02: resource 16 [mem 0x000ec000-0x000effff] [ 0.228923] pci_bus 0000:02: resource 17 [mem 0x000f0000-0x000fffff] [ 0.228926] pci_bus 0000:02: resource 18 [mem 0xfed40000-0xfed44fff] [ 0.228929] pci_bus 0000:02: resource 19 [mem 0x80000000-0xfebfffff] [ 0.228933] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff] [ 0.228936] pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf3ffffff] [ 0.228939] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref] [ 0.228942] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf60fffff] [ 0.229002] NET: Registered protocol family 2 [ 0.229157] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.230336] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.232738] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.233314] TCP: Hash tables configured (established 262144 bind 65536) [ 0.233318] TCP reno registered [ 0.233330] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.233356] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.233481] NET: Registered protocol family 1 [ 0.344100] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344158] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344221] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344291] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344366] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344446] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.344454] pci 0000:00:12.0: Boot video device [ 0.344480] PCI: CLS 64 bytes, default 64 [ 0.448099] Simple Boot Flag at 0x36 set to 0x80 [ 0.448539] audit: initializing netlink socket (disabled) [ 0.448553] type=2000 audit(1324146256.444:1): initialized [ 0.485038] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.504978] VFS: Disk quotas dquot_6.5.2 [ 0.505056] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.505780] fuse init (API version 7.17) [ 0.505894] msgmni has been set to 3843 [ 0.506306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.506339] io scheduler noop registered [ 0.506342] io scheduler deadline registered [ 0.506395] io scheduler cfq registered (default) [ 0.512279] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.512319] pcieport 0000:00:0c.0: irq 40 for MSI/MSI-X [ 0.512439] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.512466] pcieport 0000:00:0d.0: irq 41 for MSI/MSI-X [ 0.512559] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.512592] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.513096] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.513386] ACPI: AC Adapter [ACAD] (on-line) [ 0.513484] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 0.513491] ACPI: Sleep Button [SLPB] [ 0.513552] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.513789] ACPI: Lid Switch [LID] [ 0.513858] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 0.513863] ACPI: Power Button [PWRB] [ 0.513921] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.513924] ACPI: Power Button [PWRF] [ 0.514253] ACPI: processor limited to max C-state 1 [ 0.516945] [Firmware Bug]: Invalid critical threshold (0) [ 0.516997] Freeing initrd memory: 13672k freed [ 0.517387] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.517390] ACPI: Thermal Zone [THRM] (60 C) [ 0.517417] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.517431] ACPI: Battery Slot [BAT0] (battery present) [ 0.517528] ERST: Table is not found! [ 0.517530] GHES: HEST is not enabled! [ 0.517637] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.616453] Linux agpgart interface v0.103 [ 0.618500] brd: module loaded [ 0.619635] loop: module loaded [ 0.619923] ahci 0000:00:09.0: version 3.0 [ 0.620203] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 0.620227] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 0.620256] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ [ 0.620259] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP [ 0.620324] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 0.620329] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio slum part [ 0.620333] ahci 0000:00:09.0: setting latency timer to 64 [ 0.621244] scsi0 : ahci [ 0.621382] scsi1 : ahci [ 0.621489] scsi2 : ahci [ 0.621590] scsi3 : ahci [ 0.621793] ata1: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 23 [ 0.621796] ata2: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 23 [ 0.621800] ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 23 [ 0.621803] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 23 [ 0.622088] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.622680] Fixed MDIO Bus: probed [ 0.622711] tun: Universal TUN/TAP device driver, 1.6 [ 0.622713] tun: (C) 1999-2004 Max Krasnyansky <ma...@qu...> [ 0.622792] arcnet loaded. [ 0.622795] PPP generic driver version 2.4.2 [ 0.622945] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.623244] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 0.623266] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 0.623287] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.623290] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.623379] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.623404] ehci_hcd 0000:00:02.1: debug port 1 [ 0.623412] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.623438] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000 [ 0.632025] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.632213] hub 1-0:1.0: USB hub found [ 0.632220] hub 1-0:1.0: 7 ports detected [ 0.632588] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22 [ 0.632593] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22 [ 0.632606] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.632610] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.632676] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.632701] ehci_hcd 0000:00:04.1: debug port 1 [ 0.632708] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.632716] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400 [ 0.644031] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.644180] hub 2-0:1.0: USB hub found [ 0.644185] hub 2-0:1.0: 2 ports detected [ 0.644299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.644557] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18 [ 0.644577] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18 [ 0.644591] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.644594] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.644666] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.644700] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000 [ 0.702164] hub 3-0:1.0: USB hub found [ 0.702171] hub 3-0:1.0: 7 ports detected [ 0.702524] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18 [ 0.702529] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18 [ 0.702543] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.702546] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.702616] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 0.702632] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000 [ 0.758164] hub 4-0:1.0: USB hub found [ 0.758170] hub 4-0:1.0: 2 ports detected [ 0.758270] uhci_hcd: USB Universal Host Controller Interface driver [ 0.758371] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.779776] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.779782] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.779988] mousedev: PS/2 mouse device common for all mice [ 0.781340] rtc_cmos 00:07: RTC can wake from S4 [ 0.781493] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.781534] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.781647] device-mapper: uevent: version 1.0.3 [ 0.781747] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-...@re... [ 0.781756] cpuidle: using governor ladder [ 0.781758] cpuidle: using governor menu [ 0.781761] EFI Variables Facility v0.08 2004-May-17 [ 0.782098] TCP cubic registered [ 0.782271] NET: Registered protocol family 10 [ 0.782931] NET: Registered protocol family 17 [ 0.782955] Registering the dns_resolver key type [ 0.783148] PM: Hibernation image not present or could not be loaded. [ 0.783166] registered taskstats version 1 [ 0.792087] ACPI: Battery Slot [BAT0] (battery present) [ 0.801494] Magic number: 7:598:443 [ 0.801615] rtc_cmos 00:07: setting system clock to 2011-12-17 18:24:18 UTC (1324146258) [ 0.801625] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 (2 cpu cores) (version 2.20.00) [ 0.801670] powernow-k8: fid 0xc (2000 MHz), vid 0x11 [ 0.801672] powernow-k8: fid 0xa (1800 MHz), vid 0x12 [ 0.801674] powernow-k8: fid 0x8 (1600 MHz), vid 0x13 [ 0.801677] powernow-k8: fid 0x0 (800 MHz), vid 0x1e [ 0.801735] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.801737] EDD information not available. [ 0.804817] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.940031] ata3: SATA link down (SStatus 0 SControl 300) [ 0.940053] ata2: SATA link down (SStatus 0 SControl 300) [ 0.944027] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.944043] ata4: SATA link down (SStatus 0 SControl 300) [ 0.944791] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100 [ 0.944795] ata1.00: 488397168 sectors, multi 16: LBA48 [ 0.945720] ata1.00: configured for UDMA/100 [ 0.945903] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5 [ 0.946077] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.946097] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.946151] sd 0:0:0:0: [sda] Write Protect is off [ 0.946155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.946189] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.001350] sda: sda1 sda2 < sda5 > [ 1.001880] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.003924] Freeing unused kernel memory: 916k freed [ 1.004435] Write protecting the kernel read-only data: 12288k [ 1.011487] Freeing unused kernel memory: 1644k freed [ 1.017539] Freeing unused kernel memory: 1208k freed [ 1.044410] udevd[127]: starting version 175 [ 1.068050] usb 2-2: new high-speed USB device number 3 using ehci_hcd [ 1.185146] pata_amd 0000:00:06.0: version 0.4.1 [ 1.185198] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.185727] scsi4 : pata_amd [ 1.189007] scsi5 : pata_amd [ 1.189373] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 1.189377] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 1.204087] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.204327] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 1.204348] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 1.204354] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.211242] sdhci: Secure Digital Host Controller Interface driver [ 1.211246] sdhci: Copyright(c) Pierre Ossman [ 1.368329] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2 [ 1.368340] ata5: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12) [ 1.400248] ata5.00: configured for MWDMA2 [ 1.403378] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632N 0503 PQ: 0 ANSI: 5 [ 1.411148] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.411151] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.411324] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.411471] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.411579] ata6: port disabled--ignoring [ 1.414709] sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22) [ 1.414925] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7 [ 1.414941] sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7 [ 1.415979] sdhci-pci 0000:02:05.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.416033] mmc0: no vmmc regulator found [ 1.417075] Registered led device: mmc0:: [ 1.419104] mmc0: SDHCI controller on PCI [0000:02:05.1] using DMA [ 1.419765] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5 [ 1.419782] firewire_ohci 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5 [ 1.423012] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.476076] firewire_ohci: Added fw-ohci device 0000:02:05.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 1.524032] usb 4-1: new full-speed USB device number 2 using ohci_hcd [ 1.728996] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:09:25:f6 [ 1.729000] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 1.976171] firewire_core: created device fw0: GUID 00241b00964cac00, S400 [ 16.737641] udevd[373]: starting version 175 [ 16.795064] lp: driver loaded but no devices found [ 16.823192] Adding 2029564k swap on /dev/sda5. Priority:-1 extents:1 across:2029564k [ 16.865375] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 16.865399] snd_hda_intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 16.865402] hda_intel: Disabling MSI [ 16.865448] snd_hda_intel 0000:00:07.0: setting latency timer to 64 [ 17.060827] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 17.073837] acpi device:24: registered as cooling_device2 [ 17.073972] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5 [ 17.074069] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no) [ 17.141294] wmi: Mapper loaded [ 17.216187] RPC: Registered named UNIX socket transport module. [ 17.216193] RPC: Registered udp transport module. [ 17.216195] RPC: Registered tcp transport module. [ 17.216197] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 17.218508] FS-Cache: Loaded [ 17.236914] FS-Cache: Netfs 'nfs' registered for caching [ 17.248210] Installing knfsd (copyright (C) 1996 ok...@mo...). [ 17.293551] type=1400 audit(1324146274.986:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=702 comm="apparmor_parser" [ 17.299921] type=1400 audit(1324146274.990:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=702 comm="apparmor_parser" [ 17.300549] type=1400 audit(1324146274.994:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=702 comm="apparmor_parser" [ 17.332171] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input6 [ 17.426783] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 17.427121] acpiphp: Slot [1] registered [ 17.620118] forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X [ 17.887261] init: failsafe main process (779) killed by TERM signal [ 17.937767] type=1400 audit(1324146275.630:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=854 comm="apparmor_parser" [ 17.939694] type=1400 audit(1324146275.630:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=854 comm="apparmor_parser" [ 17.942324] type=1400 audit(1324146275.634:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=854 comm="apparmor_parser" [ 17.950736] type=1400 audit(1324146275.642:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=853 comm="apparmor_parser" [ 17.991790] Bluetooth: Core ver 2.16 [ 17.991909] NET: Registered protocol family 31 [ 17.991912] Bluetooth: HCI device and connection manager initialized [ 17.991916] Bluetooth: HCI socket layer initialized [ 17.991919] Bluetooth: L2CAP socket layer initialized [ 17.991927] Bluetooth: SCO socket layer initialized [ 17.992610] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 17.994913] type=1400 audit(1324146275.686:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=862 comm="apparmor_parser" [ 17.995537] type=1400 audit(1324146275.686:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=862 comm="apparmor_parser" [ 17.996453] usbcore: registered new interface driver btusb [ 18.000302] type=1400 audit(1324146275.694:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=857 comm="apparmor_parser" [ 18.281931] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.281936] Bluetooth: BNEP filters: protocol multicast [ 18.282900] Bluetooth: RFCOMM TTY layer initialized [ 18.282910] Bluetooth: RFCOMM socket layer initialized [ 18.282913] Bluetooth: RFCOMM ver 1.11 [ 18.364962] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0 [ 18.371662] Linux video capture interface: v2.00 [ 18.373953] uvcvideo: Found UVC 1.00 device HP Webcam (0408:030c) [ 18.380119] input: HP Webcam as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input7 [ 18.380741] usbcore: registered new interface driver uvcvideo [ 18.380745] USB Video Class driver (1.1.1) [ 18.395804] input: HP WMI hotkeys as /devices/virtual/input/input8 [ 18.443329] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 18.941502] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 18.941507] vesafb: scrolling: redraw [ 18.941511] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 18.942395] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90001400000, using 3072k, total 3072k [ 18.942637] Console: switching to colour frame buffer device 128x48 [ 18.942663] fb0: VESA VGA frame buffer device [ 19.028240] ppdev: user-space parallel port driver [ 19.828857] [drm] Initialized drm 1.1.0 20060810 [ 19.840742] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16 [ 19.840765] nouveau 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16 [ 19.840771] nouveau 0000:00:12.0: setting latency timer to 64 [ 19.842376] [drm] nouveau 0000:00:12.0: Detected an NV40 generation card (0x067000a1) [ 19.842383] checking generic (d0000000 300000) vs hw (d0000000 10000000) [ 19.842386] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver [ 19.842467] Console: switching to colour dummy device 80x25 [ 19.844995] [drm] nouveau 0000:00:12.0: Attempting to load BIOS image from PRAMIN [ 19.888130] [drm] nouveau 0000:00:12.0: ... appears to be valid [ 19.888135] [drm] nouveau 0000:00:12.0: BIT BIOS found [ 19.888139] [drm] nouveau 0000:00:12.0: Bios version 05.67.32.16 [ 19.888143] [drm] nouveau 0000:00:12.0: TMDS table version 1.1 [ 19.888145] [drm] nouveau 0000:00:12.0: TMDS table script pointers not stubbed [ 19.888148] [drm] nouveau 0000:00:12.0: Found Display Configuration Block version 3.0 [ 19.888153] [drm] nouveau 0000:00:12.0: Raw DCB entry 0: 03015323 00000004 [ 19.888156] [drm] nouveau 0000:00:12.0: Raw DCB entry 1: 01000310 00000023 [ 19.888159] [drm] nouveau 0000:00:12.0: Raw DCB entry 2: 020223f1 0040c080 [ 19.888163] [drm] nouveau 0000:00:12.0: DCB connector table: VHER 0x30 5 10 2 [ 19.888167] [drm] nouveau 0000:00:12.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 19.888170] [drm] nouveau 0000:00:12.0: 1: 0x00001161: type 0x61 idx 1 tag 0x07 [ 19.888173] [drm] nouveau 0000:00:12.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 19.888176] [drm] nouveau 0000:00:12.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 19.888180] [drm] nouveau 0000:00:12.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 19.888183] [drm] nouveau 0000:00:12.0: 5: 0x00000340: type 0x40 idx 5 tag 0xff [ 19.888190] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 0 at offset 0xE333 [ 19.888213] [drm] nouveau 0000:00:12.0: ======= misaligned reg 0x001020FB ======= [ 19.888219] [drm] nouveau 0000:00:12.0: ======= misaligned reg 0x001020FB ======= [ 19.888247] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 1 at offset 0xE484 [ 19.888250] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 2 at offset 0xE485 [ 19.888268] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 3 at offset 0xE607 [ 19.888277] [drm] nouveau 0000:00:12.0: Parsing VBIOS init table 4 at offset 0xE687 [ 19.906971] [drm] nouveau 0000:00:12.0: 3 available performance level(s) [ 19.906976] [drm] nouveau 0000:00:12.0: 0: core 100MHz shader 100MHz voltage 1100mV fanspeed 100% [ 19.906981] [drm] nouveau 0000:00:12.0: 1: core 250MHz shader 250MHz voltage 1200mV fanspeed 100% [ 19.906985] [drm] nouveau 0000:00:12.0: 2: core 425MHz shader 425MHz voltage 1200mV fanspeed 100% [ 19.906992] [drm] nouveau 0000:00:12.0: c: core 39MHz [ 19.907178] [TTM] Zone kernel: Available graphics memory: 992710 kiB. [ 19.907181] [TTM] Initializing pool allocator. [ 19.907196] [drm] nouveau 0000:00:12.0: Detected 64MiB VRAM [ 19.907946] [drm] nouveau 0000:00:12.0: 64 MiB GART (aperture) [ 19.909301] [drm] nouveau 0000:00:12.0: ACPI backlight interface available, not registering our own [ 19.909580] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 19.909582] [drm] No driver support for vblank timestamp query. [ 19.909588] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on lvds encoder (output 0) [ 19.909592] [drm] nouveau 0000:00:12.0: Calling LVDS script 6: [ 19.909595] [drm] nouveau 0000:00:12.0: 0xD680: Parsing digital output script table [ 19.909603] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on vga encoder (output 1) [ 19.909607] [drm] nouveau 0000:00:12.0: Setting dpms mode 3 on TV encoder (output 2) [ 20.092031] [drm] nouveau 0000:00:12.0: Load detected on output B [ 20.092350] [drm] nouveau 0000:00:12.0: allocated 1280x800 fb: 0x49000, bo ffff88006966e000 [ 20.092539] fbcon: nouveaufb (fb0) is primary device [ 20.092676] Console: switching to colour frame buffer device 90x36 [ 20.092687] fb0: nouveaufb frame buffer device [ 20.092689] drm: registered panic notifier [ 20.092699] [drm] Initialized nouveau 0.0.16 20090420 for 0000:00:12.0 on minor 0 [ 20.284029] [drm] nouveau 0000:00:12.0: Load detected on output B [ 20.476025] [drm] nouveau 0000:00:12.0: Load detected on output B [ 20.528702] [drm] nouveau 0000:00:12.0: Calling LVDS script 2: [ 20.528708] [drm] nouveau 0000:00:12.0: 0xD6D8: Parsing digital output script table [ 20.659680] [drm] nouveau 0000:00:12.0: Setting dpms mode 0 on lvds encoder (output 0) [ 20.659683] [drm] nouveau 0000:00:12.0: Calling LVDS script 5: [ 20.659685] [drm] nouveau 0000:00:12.0: 0xD676: Parsing digital output script table [ 20.659690] [drm] nouveau 0000:00:12.0: Output LVDS-1 is running on CRTC 0 using output A [ 20.670286] [drm] nouveau 0000:00:12.0: Setting dpms mode 0 on TV encoder (output 2) [ 20.670291] [drm] nouveau 0000:00:12.0: Output TV-1 is running on CRTC 1 using output B [ 21.562495] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 21.961202] init: plymouth-stop pre-start process (1318) terminated with status 1 [ 22.912028] [drm] nouveau 0000:00:12.0: Load detected on output B [ 23.312026] [d... [truncated message content] |