Re: isochronous cycle inconsistent
Brought to you by:
aeb,
bencollins
From: Carl K. <ca...@pe...> - 2011-12-17 23:17:20
|
> So this time it didn't error. here is all of dmesg, I am going to > reboot and try to get it to error, will post outcome. (that post had 73k of dmesg including boot. it is held up due to list limit of 50k) I tried 3 or 4 time, no error. I switched back to the longer 2m cable I was using when I got the error the first time, now I get it. so short cable: no error, log cable: error - 100% of the 8 tests. [ 114.239762] pci 0000:04:00.0: [11c1:5901] type 0 class 0x000c00 [ 114.239802] pci 0000:04:00.0: reg 10: [mem 0x00000000-0x00000fff 64bit] [ 114.239889] pci 0000:04:00.0: supports D1 D2 [ 114.239896] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 114.239906] pci 0000:04:00.0: PME# disabled [ 114.244450] pci 0000:04:00.0: BAR 0: assigned [mem 0xf2000000-0xf2000fff 64bit] [ 114.244468] pci 0000:04:00.0: BAR 0: set to [mem 0xf2000000-0xf2000fff 64bit] (PCI address [0xf2000000-0xf2000fff]) [ 114.244502] pci 0000:04:00.0: no hotplug settings from platform [ 114.247572] firewire_ohci 0000:04:00.0: enabling device (0000 -> 0002) [ 114.248682] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16 [ 114.248699] firewire_ohci 0000:04:00.0: PCI INT A -> Link[LK1E] -> GSI 16 (level, low) -> IRQ 16 [ 114.248716] firewire_ohci 0000:04:00.0: setting latency timer to 64 [ 114.304118] firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI v1.10, 8 IR + 8 IT contexts, quirks 0x10 [ 114.804418] firewire_core: created device fw1: GUID 0108000000006351, S800 [ 127.652373] firewire_ohci: isochronous cycle inconsistent [ 158.232418] firewire_core: giving up on config rom for node id ffc0 [ 158.232508] firewire_core: giving up on config rom for node id ffc1 [ 158.232528] firewire_core: phy config: card 0, new root=ffc0, gap_count=5 [ 158.732879] firewire_core: created device fw2: GUID 00241b00964cac00, S400 -- Carl K |