[Linux1394-cvslog] rev 678 - trunk
Brought to you by:
aeb,
bencollins
From: SVN U. <ben...@li...> - 2002-11-16 21:32:12
|
Author: bencollins Date: 2002-11-16 16:31:35 -0500 (Sat, 16 Nov 2002) New Revision: 678 Added: trunk/Kconfig Log: New replacement for Config.in/Config.help in 2.5.x Added: trunk/Kconfig ============================================================================== --- trunk/Kconfig (original) +++ trunk/Kconfig 2002-11-16 16:31:35.000000000 -0500 @@ -0,0 +1,161 @@ +# -*- shell-script -*- + +menu "IEEE 1394 (FireWire) support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + +config IEEE1394 + tristate "IEEE 1394 (FireWire) support (EXPERIMENTAL)" + ---help--- + IEEE 1394 describes a high performance serial bus, which is also + known as FireWire(tm) or i.Link(tm) and is used for connecting all + sorts of devices (most notably digital video cameras) to your + computer. + + If you have FireWire hardware and want to use it, say Y here. This + is the core support only, you will also need to select a driver for + your IEEE 1394 adapter. + + If you want to compile this as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called ieee1394.o. + +comment "Device Drivers" + depends on IEEE1394 + +comment "Texas Instruments PCILynx requires I2C bit-banging" + depends on IEEE1394 && (I2C=n || I2C_ALGOBIT=n) + +config IEEE1394_PCILYNX + tristate "Texas Instruments PCILynx support" + depends on IEEE1394 && I2C_ALGOBIT + help + Say Y here if you have an IEEE-1394 controller with the Texas + Instruments PCILynx chip. Note: this driver is written for revision + 2 of this chip and may not work with revision 0. + + If you want to compile this as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called pcilynx.o. + +# Non-maintained pcilynx options +# if [ "$CONFIG_IEEE1394_PCILYNX" != "n" ]; then +# bool ' Use PCILynx local RAM' CONFIG_IEEE1394_PCILYNX_LOCALRAM +# bool ' Support for non-IEEE1394 local ports' CONFIG_IEEE1394_PCILYNX_PORTS +# fi +config IEEE1394_OHCI1394 + tristate "OHCI-1394 support" + depends on IEEE1394 + ---help--- + Enable this driver if you have an IEEE 1394 controller based on the + OHCI-1394 specification. The current driver is only tested with OHCI + chipsets made by Texas Instruments and NEC. Most third-party vendors + use one of these chipsets. It should work with any OHCI-1394 + compliant card, however. + + If you want to compile this as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called ohci1394.o. + +comment "Protocol Drivers" + depends on IEEE1394 + +config IEEE1394_VIDEO1394 + tristate "OHCI-1394 Video support" + depends on IEEE1394_OHCI1394 + help + This option enables video device usage for OHCI-1394 cards. Enable + this option only if you have an IEEE 1394 video device connected to + an OHCI-1394 card. + +config IEEE1394_SBP2 + tristate "SBP-2 support (Harddisks etc.)" + depends on SCSI && IEEE1394 + help + This option enables you to use SBP-2 devices connected to your IEEE + 1394 bus. SBP-2 devices include harddrives and DVD devices. + +config IEEE1394_SBP2_PHYS_DMA + bool "Enable Phys DMA support for SBP2 (Debug)" + depends on IEEE1394_SBP2 + +config IEEE1394_ETH1394 + tristate "Ethernet over 1394" + depends on IEEE1394 + help + Extremely Experimental! This driver is a Linux specific way to use your + IEEE1394 Host as an Ethernet type device. This is _NOT_ IP1394. + +config IEEE1394_DV1394 + tristate "OHCI-DV I/O support" + depends on IEEE1394_OHCI1394 + ---help--- + This driver allows you to transmit and receive DV (digital video) + streams on an OHCI-1394 card using a simple frame-oriented + interface. + + The user-space API for dv1394 is documented in dv1394.h. + + If you want to compile this as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called dv1394.o. + +config IEEE1394_RAWIO + tristate "Raw IEEE1394 I/O support" + depends on IEEE1394 + help + Say Y here if you want support for the raw device. This is generally + a good idea, so you should say Y here. The raw device enables + direct communication of user programs with the IEEE 1394 bus and + thus with the attached peripherals. + + If you want to compile this as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called raw1394.o. + +config IEEE1394_CMP + tristate "IEC61883-1 Plug support" + depends on IEEE1394 + help + This option enables the Connection Management Procedures + (IEC61883-1) driver, which implements input and output plugs. + + If you want to compile this as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called amdtp.o. + +config IEEE1394_AMDTP + tristate "IEC61883-6 (Audio transmission) support" + depends on IEEE1394_OHCI1394 && IEEE1394_CMP + ---help--- + This option enables the Audio & Music Data Transmission Protocol + (IEC61883-6) driver, which implements audio transmission over + IEEE1394. + + The userspace interface is documented in amdtp.h. + + If you want to compile this as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called amdtp.o. + +config IEEE1394_VERBOSEDEBUG + bool "Excessive debugging output" + depends on IEEE1394 + help + If you say Y here, you will get very verbose debugging logs from the + subsystem which includes a dump of the header of every sent and + received packet. This can amount to a high amount of data collected + in a very short time which is usually also saved to disk by the + system logging daemons. + + Say Y if you really want or need the debugging output, everyone else + says N. + +endmenu + |