[LV-kern-commit] CVS: kernel-2.4/arch/i386/kernel apic.c,1.2,1.3 apm.c,1.2,1.3 dmi_scan.c,1.3,1.4 entry.S,1.2,1.3 head.S,1.2,1.3 i386_ksyms.c,1.2,1.3 pci-irq.c,1.2,1.3 pci-pc.c,1.3,1.4 process.c,1.2,1.3 setup.c,1.3,1.4 signal.c,1.2,1.3 time.c,1.2,1.3 vm86.c,1.2,1.3

[Dave A. <ai...@us...>]

Update of /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel
In directory sc8-pr-cvs1:/tmp/cvs-serv23180/arch/i386/kernel

Modified Files:
	apic.c apm.c dmi_scan.c entry.S head.S i386_ksyms.c pci-irq.c 
	pci-pc.c process.c setup.c signal.c time.c vm86.c 
Log Message:
DA: sync to Marcelo 2.4.18 + remove init_mmap (no longer needed)


Index: apic.c
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/apic.c,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- apic.c	10 Apr 2002 14:23:20 -0000	1.2
+++ apic.c	10 Jun 2003 01:45:54 -0000	1.3
@@ -56,6 +56,14 @@
 	maxlvt = get_maxlvt();
 
 	/*
+	 * Masking an LVT entry on a P6 can trigger a local APIC error
+	 * if the vector is zero. Mask LVTERR first to prevent this.
+	 */
+	if (maxlvt >= 3) {
+		v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
+		apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
+	}
+	/*
 	 * Careful: we have to set masks only first to deassert
 	 * any level-triggered sources.
 	 */
@@ -65,10 +73,6 @@
 	apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
 	v = apic_read(APIC_LVT1);
 	apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED);
-	if (maxlvt >= 3) {
-		v = apic_read(APIC_LVTERR);
-		apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
-	}
 	if (maxlvt >= 4) {
 		v = apic_read(APIC_LVTPC);
 		apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
@@ -84,6 +88,12 @@
 		apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
 	if (maxlvt >= 4)
 		apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
+	v = GET_APIC_VERSION(apic_read(APIC_LVR));
+	if (APIC_INTEGRATED(v)) {	/* !82489DX */
+		if (maxlvt > 3)
+			apic_write(APIC_ESR, 0);
+		apic_read(APIC_ESR);
+	}
 }
 
 void __init connect_bsp_APIC(void)
@@ -480,6 +490,7 @@
 	l &= ~MSR_IA32_APICBASE_BASE;
 	l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
 	wrmsr(MSR_IA32_APICBASE, l, h);
+	apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
 	apic_write(APIC_ID, apic_pm_state.apic_id);
 	apic_write(APIC_DFR, apic_pm_state.apic_dfr);
 	apic_write(APIC_LDR, apic_pm_state.apic_ldr);
@@ -487,15 +498,15 @@
 	apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
 	apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
 	apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
+	apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
+	apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
+	apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
+	apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
 	apic_write(APIC_ESR, 0);
 	apic_read(APIC_ESR);
 	apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
 	apic_write(APIC_ESR, 0);
 	apic_read(APIC_ESR);
-	apic_write(APIC_LVTPC, apic_pm_state.apic_lvtpc);
-	apic_write(APIC_LVTT, apic_pm_state.apic_lvtt);
-	apic_write(APIC_TDCR, apic_pm_state.apic_tdcr);
-	apic_write(APIC_TMICT, apic_pm_state.apic_tmict);
 	__restore_flags(flags);
 	if (apic_pm_state.perfctr_pmdev)
 		pm_send(apic_pm_state.perfctr_pmdev, PM_RESUME, data);

Index: apm.c
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/apm.c,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- apm.c	10 Apr 2002 14:23:20 -0000	1.2
+++ apm.c	10 Jun 2003 01:45:55 -0000	1.3
@@ -39,6 +39,7 @@
  * Feb 2000, Version 1.13
  * Nov 2000, Version 1.14
  * Oct 2001, Version 1.15
+ * Jan 2002, Version 1.16
  *
  * History:
  *    0.6b: first version in official kernel, Linux 1.3.46
@@ -85,7 +86,7 @@
  *         change APM_NOINTS to CONFIG_APM_ALLOW_INTS
  *         remove dependency on CONFIG_PROC_FS
  *         Stephen Rothwell
- *    1.9: Fix small typo.  <la...@il...>
+ *    1.9: Fix small typo.  <la...@wo...>
  *         Try to cope with BIOS's that need to have all display
  *         devices blanked and not just the first one.
  *         Ross Paterson <ro...@so...>
@@ -164,8 +165,18 @@
  *         If an APM idle fails log it and idle sensibly
  *   1.15: Don't queue events to clients who open the device O_WRONLY.
  *         Don't expect replies from clients who open the device O_RDONLY.
- *         (Idea from Thomas Hood <jdthood at yahoo.co.uk>)
- *         Minor waitqueue cleanups.(John Fremlin <ch...@ba...>)
+ *         (Idea from Thomas Hood <jd...@ma...>)
+ *         Minor waitqueue cleanups. (John Fremlin <ch...@ba...>)
+ *   1.16: Fix idle calling. (Andreas Steinmetz <as...@do...> et al.)
+ *         Notify listeners of standby or suspend events before notifying
+ *         drivers. Return EBUSY to ioctl() if suspend is rejected.
+ *         (Russell King <rm...@ar...> and Thomas Hood)
+ *         Ignore first resume after we generate our own resume event
+ *         after a suspend (Thomas Hood <jd...@ma...>)
+ *         Daemonize now gets rid of our controlling terminal (sfr).
+ *         CONFIG_APM_CPU_IDLE now just affects the default value of
+ *         idle_threshold (sfr).
+ *         Change name of kernel apm daemon (as it no longer idles) (sfr).
  *
  * APM 1.1 Reference:
  *
@@ -238,6 +249,12 @@
  *	    [no-]power[-_]off		power off on shutdown
  *	    bounce[-_]interval=<n>	number of ticks to ignore suspend
  *	    				bounces
+ *          idle[-_]threshold=<n>       System idle percentage above which to
+ *                                      make APM BIOS idle calls. Set it to
+ *                                      100 to disable.
+ *          idle[-_]period=<n>          Period (in 1/100s of a second) over
+ *                                      which the idle percentage is
+ *                                      calculated.
  */
 
 /* KNOWN PROBLEM MACHINES:
@@ -341,15 +358,26 @@
 #define APM_BIOS_MAGIC		0x4101
 
 /*
+ * idle percentage above which bios idle calls are done
+ */
+#ifdef CONFIG_APM_CPU_IDLE
+#define DEFAULT_IDLE_THRESHOLD	95
+#else
+#define DEFAULT_IDLE_THRESHOLD	100
+#endif
+#define DEFAULT_IDLE_PERIOD	(100 / 3)
+
+/*
  * Local variables
  */
 static struct {
 	unsigned long	offset;
 	unsigned short	segment;
 }				apm_bios_entry;
-#ifdef CONFIG_APM_CPU_IDLE
 static int			clock_slowed;
-#endif
+static int			idle_threshold = DEFAULT_IDLE_THRESHOLD;
+static int			idle_period = DEFAULT_IDLE_PERIOD;
+static int			set_pm_idle;
 static int			suspends_pending;
 static int			standbys_pending;
 static int			waiting_for_resume;
@@ -388,7 +416,7 @@
 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
 static struct apm_user *	user_list;
 
-static char			driver_version[] = "1.15";	/* no spaces */
+static char			driver_version[] = "1.16";	/* no spaces */
 
 /*
  *	APM event names taken from the APM 1.2 specification. These are
@@ -684,8 +712,6 @@
 	return set_power_state(APM_DEVICE_ALL, state);
 }
 
-#ifdef CONFIG_APM_CPU_IDLE
-
 /**
  *	apm_do_idle	-	perform power saving
  *
@@ -735,63 +761,89 @@
 	}
 }
 
-#if 0
-extern int hlt_counter;
-
 /*
- * If no process has been interested in this
- * CPU for some time, we want to wake up the
- * power management thread - we probably want
+ * If no process has really been interested in
+ * the CPU for some time, we want to call BIOS
+ * power management - we probably want
  * to conserve power.
  */
-#define HARD_IDLE_TIMEOUT (HZ/3)
+#define IDLE_CALC_LIMIT   (HZ * 100)
+#define IDLE_LEAKY_MAX    16
 
-/* This should wake up kapmd and ask it to slow the CPU */
-#define powermanagement_idle()  do { } while (0)
+static void (*sys_idle)(void);
+
+extern void default_idle(void);
 
 /**
  * apm_cpu_idle		-	cpu idling for APM capable Linux
  *
  * This is the idling function the kernel executes when APM is available. It 
- * tries to save processor time directly by using hlt instructions. A
- * separate apm thread tries to do the BIOS power management.
- *
- * N.B. This is curently not used for kernels 2.4.x.
+ * tries to do BIOS powermanagement based on the average system idle time.
+ * Furthermore it calls the system default idle routine.
  */
 
 static void apm_cpu_idle(void)
 {
-	unsigned int start_idle;
+	static int use_apm_idle = 0;
+	static unsigned int last_jiffies = 0;
+	static unsigned int last_stime = 0;
+
+	int apm_is_idle = 0;
+	unsigned int jiffies_since_last_check = jiffies - last_jiffies;
+	unsigned int t1;
+
+
+recalc:
+	if (jiffies_since_last_check > IDLE_CALC_LIMIT) {
+		use_apm_idle = 0;
+		last_jiffies = jiffies;
+		last_stime = current->times.tms_stime;
+	} else if (jiffies_since_last_check > idle_period) {
+		unsigned int idle_percentage;
+
+		idle_percentage = current->times.tms_stime - last_stime;
+		idle_percentage *= 100;
+		idle_percentage /= jiffies_since_last_check;
+		use_apm_idle = (idle_percentage > idle_threshold);
+		last_jiffies = jiffies;
+		last_stime = current->times.tms_stime;
+	}
+
+	t1 = IDLE_LEAKY_MAX;
+
+	while (!current->need_resched) {
+		if (use_apm_idle) {
+			unsigned int t;
 
-	start_idle = jiffies;
-	while (1) {
-		if (!current->need_resched) {
-			if (jiffies - start_idle < HARD_IDLE_TIMEOUT) {
-				if (!current_cpu_data.hlt_works_ok)
-					continue;
-				if (hlt_counter)
+			t = jiffies;
+			switch (apm_do_idle()) {
+			case 0: apm_is_idle = 1;
+				if (t != jiffies) {
+					if (t1) {
+						t1 = IDLE_LEAKY_MAX;
+						continue;
+					}
+				} else if (t1) {
+					t1--;
 					continue;
-				__cli();
-				if (!current->need_resched)
-					safe_halt();
-				else
-					__sti();
-				continue;
+				}
+				break;
+			case 1: apm_is_idle = 1;
+				break;
 			}
-
-			/*
-			 * Ok, do some power management - we've been idle for too long
-			 */
-			powermanagement_idle();
 		}
-
-		schedule();
-		check_pgt_cache();
-		start_idle = jiffies;
+		if (sys_idle)
+			sys_idle();
+		else
+			default_idle();
+		jiffies_since_last_check = jiffies - last_jiffies;
+		if (jiffies_since_last_check > idle_period)
+			goto recalc;
 	}
+
+	if (apm_is_idle)
+		apm_do_busy();
 }
-#endif
-#endif
 
 #ifdef CONFIG_SMP
 static int apm_magic(void * unused)
@@ -1133,57 +1185,42 @@
 #endif
 }
 
-static int send_event(apm_event_t event)
+static int suspend(int vetoable)
 {
-	switch (event) {
-	case APM_SYS_SUSPEND:
-	case APM_CRITICAL_SUSPEND:
-	case APM_USER_SUSPEND:
-		/* map all suspends to ACPI D3 */
-		if (pm_send_all(PM_SUSPEND, (void *)3)) {
-			if (event == APM_CRITICAL_SUSPEND) {
-				printk(KERN_CRIT
-					"apm: Critical suspend was vetoed, "
-					"expect armageddon\n" );
-				return 0;
-			}
+	int		err;
+	struct apm_user	*as;
+
+	if (pm_send_all(PM_SUSPEND, (void *)3)) {
+		/* Vetoed */
+		if (vetoable) {
 			if (apm_info.connection_version > 0x100)
 				apm_set_power_state(APM_STATE_REJECT);
-			return 0;
+			err = -EBUSY;
+			waiting_for_resume = 0;
+			printk(KERN_WARNING "apm: suspend was vetoed.\n");
+			goto out;
 		}
-		break;
-	case APM_NORMAL_RESUME:
-	case APM_CRITICAL_RESUME:
-		/* map all resumes to ACPI D0 */
-		(void) pm_send_all(PM_RESUME, (void *)0);
-		break;
+		printk(KERN_CRIT "apm: suspend was vetoed, but suspending anyway.\n");
 	}
-
-	return 1;
-}
-
-static int suspend(void)
-{
-	int		err;
-	struct apm_user	*as;
-
 	get_time_diff();
 	cli();
 	err = apm_set_power_state(APM_STATE_SUSPEND);
 	reinit_timer();
 	set_time();
+	sti();
 	if (err == APM_NO_ERROR)
 		err = APM_SUCCESS;
 	if (err != APM_SUCCESS)
 		apm_error("suspend", err);
-	send_event(APM_NORMAL_RESUME);
-	sti();
+	err = (err == APM_SUCCESS) ? 0 : -EIO;
+	pm_send_all(PM_RESUME, (void *)0);
 	queue_event(APM_NORMAL_RESUME, NULL);
+	ignore_normal_resume = 1;
+ out:
 	for (as = user_list; as != NULL; as = as->next) {
 		as->suspend_wait = 0;
-		as->suspend_result = ((err == APM_SUCCESS) ? 0 : -EIO);
+		as->suspend_result = err;
 	}
-	ignore_normal_resume = 1;
 	wake_up_interruptible(&apm_suspend_waitqueue);
 	return err;
 }
@@ -1192,6 +1229,7 @@
 {
 	int	err;
 
+	/* If needed, notify drivers here */
 	get_time_diff();
 	err = apm_set_power_state(APM_STATE_STANDBY);
 	if ((err != APM_SUCCESS) && (err != APM_NO_ERROR))
@@ -1235,17 +1273,13 @@
 		if (ignore_bounce
 		    && ((jiffies - last_resume) > bounce_interval))
 			ignore_bounce = 0;
-		if (ignore_normal_resume && (event != APM_NORMAL_RESUME))
-			ignore_normal_resume = 0;
 
 		switch (event) {
 		case APM_SYS_STANDBY:
 		case APM_USER_STANDBY:
-			if (send_event(event)) {
-				queue_event(event, NULL);
-				if (standbys_pending <= 0)
-					standby();
-			}
+			queue_event(event, NULL);
+			if (standbys_pending <= 0)
+				standby();
 			break;
 
 		case APM_USER_SUSPEND:
@@ -1270,12 +1304,10 @@
 			 */
 			if (waiting_for_resume)
 				return;
-			if (send_event(event)) {
-				queue_event(event, NULL);
-				waiting_for_resume = 1;
-				if (suspends_pending <= 0)
-					(void) suspend();
-			}
+			waiting_for_resume = 1;
+			queue_event(event, NULL);
+			if (suspends_pending <= 0)
+				(void) suspend(1);
 			break;
 
 		case APM_NORMAL_RESUME:
@@ -1287,16 +1319,17 @@
 			if ((event != APM_NORMAL_RESUME)
 			    || (ignore_normal_resume == 0)) {
 				set_time();
-				send_event(event);
+				pm_send_all(PM_RESUME, (void *)0);
 				queue_event(event, NULL);
 			}
+			ignore_normal_resume = 0;
 			break;
 
 		case APM_CAPABILITY_CHANGE:
 		case APM_LOW_BATTERY:
 		case APM_POWER_STATUS_CHANGE:
-			send_event(event);
 			queue_event(event, NULL);
+			/* If needed, notify drivers here */
 			break;
 
 		case APM_UPDATE_TIME:
@@ -1304,12 +1337,10 @@
 			break;
 
 		case APM_CRITICAL_SUSPEND:
-			send_event(event);
 			/*
-			 * We can only hope it worked - we are not allowed
-			 * to reject a critical suspend.
+			 * We are not allowed to reject a critical suspend.
 			 */
-			(void) suspend();
+			(void) suspend(0);
 			break;
 		}
 	}
@@ -1337,63 +1368,24 @@
 
 /*
  * This is the APM thread main loop.
- *
- * Check whether we're the only running process to
- * decide if we should just power down.
- *
  */
-#define system_idle() (nr_running == 1)
 
 static void apm_mainloop(void)
 {
-	int timeout = HZ;
 	DECLARE_WAITQUEUE(wait, current);
 
 	add_wait_queue(&apm_waitqueue, &wait);
 	set_current_state(TASK_INTERRUPTIBLE);
 	for (;;) {
-		/* Nothing to do, just sleep for the timeout */
-		timeout = 2 * timeout;
-		if (timeout > APM_CHECK_TIMEOUT)
-			timeout = APM_CHECK_TIMEOUT;
-		schedule_timeout(timeout);
+		schedule_timeout(APM_CHECK_TIMEOUT);
 		if (exit_kapmd)
 			break;
-
 		/*
 		 * Ok, check all events, check for idle (and mark us sleeping
 		 * so as not to count towards the load average)..
 		 */
 		set_current_state(TASK_INTERRUPTIBLE);
 		apm_event_handler();
-#ifdef CONFIG_APM_CPU_IDLE
-		if (!system_idle())
-			continue;
-		
-		/*
-		 *	If we can idle...
-		 */
-		if (apm_do_idle() != -1) {
-			unsigned long start = jiffies;
-			while ((!exit_kapmd) && system_idle()) {
-				if (apm_do_idle()) {
-					set_current_state(TASK_INTERRUPTIBLE);
-					/* APM needs us to snooze .. either
-					   the BIOS call failed (-1) or it
-					   slowed the clock (1). We sleep
-					   until it talks to us again */
-					schedule_timeout(1);
-				}
-				if ((jiffies - start) > APM_CHECK_TIMEOUT) {
-					apm_event_handler();
-					start = jiffies;
-				}
-			}
-			apm_do_busy();
-			apm_event_handler();
-			timeout = 1;
-		}
-#endif
 	}
 	remove_wait_queue(&apm_waitqueue, &wait);
 }
@@ -1479,9 +1471,7 @@
 			as->standbys_read--;
 			as->standbys_pending--;
 			standbys_pending--;
-		} else if (!send_event(APM_USER_STANDBY))
-			return -EAGAIN;
-		else
+		} else
 			queue_event(APM_USER_STANDBY, as);
 		if (standbys_pending <= 0)
 			standby();
@@ -1491,13 +1481,10 @@
 			as->suspends_read--;
 			as->suspends_pending--;
 			suspends_pending--;
-		} else if (!send_event(APM_USER_SUSPEND))
-			return -EAGAIN;
-		else
+		} else
 			queue_event(APM_USER_SUSPEND, as);
 		if (suspends_pending <= 0) {
-			if (suspend() != APM_SUCCESS)
-				return -EIO;
+			return suspend(1);
 		} else {
 			as->suspend_wait = 1;
 			wait_event_interruptible(apm_suspend_waitqueue,
@@ -1528,7 +1515,7 @@
 	if (as->suspends_pending > 0) {
 		suspends_pending -= as->suspends_pending;
 		if (suspends_pending <= 0)
-			(void) suspend();
+			(void) suspend(1);
 	}
 	if (user_list == as)
 		user_list = as->next;
@@ -1676,9 +1663,8 @@
 
 	daemonize();
 
-	strcpy(current->comm, "kapm-idled");
+	strcpy(current->comm, "kapmd");
 	sigfillset(&current->blocked);
-	current->tty = NULL;	/* get rid of controlling tty */
 
 	if (apm_info.connection_version == 0) {
 		apm_info.connection_version = apm_info.bios.version;
@@ -1797,7 +1783,14 @@
 		if ((strncmp(str, "bounce-interval=", 16) == 0) ||
 		    (strncmp(str, "bounce_interval=", 16) == 0))
 			bounce_interval = simple_strtol(str + 16, NULL, 0);
-		invert = (strncmp(str, "no-", 3) == 0);
+		if ((strncmp(str, "idle-threshold=", 15) == 0) ||
+		    (strncmp(str, "idle_threshold=", 15) == 0))
+			idle_threshold = simple_strtol(str + 15, NULL, 0);
+		if ((strncmp(str, "idle-period=", 12) == 0) ||
+		    (strncmp(str, "idle_period=", 12) == 0))
+			idle_threshold = simple_strtol(str + 15, NULL, 0);
+		invert = (strncmp(str, "no-", 3) == 0) ||
+			(strncmp(str, "no_", 3) == 0);
 		if (invert)
 			str += 3;
 		if (strncmp(str, "debug", 5) == 0)
@@ -1968,6 +1961,14 @@
 
 	misc_register(&apm_device);
 
+	if (HZ != 100)
+		idle_period = (idle_period * HZ) / 100;
+	if (idle_threshold < 100) {
+		sys_idle = pm_idle;
+		pm_idle  = apm_cpu_idle;
+		set_pm_idle = 1;
+	}
+
 	return 0;
 }
 
@@ -1975,6 +1976,8 @@
 {
 	int	error;
 
+	if (set_pm_idle)
+		pm_idle = sys_idle;
 	if (((apm_info.bios.flags & APM_BIOS_DISENGAGED) == 0)
 	    && (apm_info.connection_version > 0x0100)) {
 		error = apm_engage_power_management(APM_DEVICE_ALL, 0);
@@ -2012,5 +2015,11 @@
 MODULE_PARM(realmode_power_off, "i");
 MODULE_PARM_DESC(realmode_power_off,
 		"Switch to real mode before powering off");
+MODULE_PARM(idle_threshold, "i");
+MODULE_PARM_DESC(idle_threshold,
+	"System idle percentage above which to make APM BIOS idle calls");
+MODULE_PARM(idle_period, "i");
+MODULE_PARM_DESC(idle_period,
+	"Period (in sec/100) over which to caculate the idle percentage");
 
 EXPORT_NO_SYMBOLS;

Index: dmi_scan.c
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/dmi_scan.c,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- dmi_scan.c	10 Jun 2003 01:13:14 -0000	1.3
+++ dmi_scan.c	10 Jun 2003 01:45:55 -0000	1.4
@@ -467,6 +467,11 @@
 			MATCH(DMI_PRODUCT_NAME, "PowerEdge 300/"),
 			NO_MATCH, NO_MATCH
 			} },
+	{ set_bios_reboot, "Dell PowerEdge 2400", {  /* Handle problems with rebooting on Dell 300/800's */
+			MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
+			MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
+			NO_MATCH, NO_MATCH
+			} },
 	{ set_apm_ints, "Dell Inspiron", {	/* Allow interrupts during suspend on Dell Inspiron laptops*/
 			MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"),
 			MATCH(DMI_PRODUCT_NAME, "Inspiron 4000"),

Index: entry.S
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/entry.S,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- entry.S	10 Apr 2002 14:23:20 -0000	1.2
+++ entry.S	10 Jun 2003 01:45:55 -0000	1.3
@@ -622,6 +622,18 @@
 	.long SYMBOL_NAME(sys_ni_syscall)	/* Reserved for Security */
 	.long SYMBOL_NAME(sys_gettid)
 	.long SYMBOL_NAME(sys_readahead)	/* 225 */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved for setxattr */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved for lsetxattr */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved for fsetxattr */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved for getxattr */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* 230 reserved for lgetxattr */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved for fgetxattr */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved for listxattr */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved for llistxattr */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved for flistxattr */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* 235 reserved for removexattr */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved for lremovexattr */
+	.long SYMBOL_NAME(sys_ni_syscall)	/* reserved for fremovexattr */
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long SYMBOL_NAME(sys_ni_syscall)

Index: head.S
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/head.S,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- head.S	10 Apr 2002 14:23:20 -0000	1.2
+++ head.S	10 Jun 2003 01:45:55 -0000	1.3
@@ -446,12 +446,3 @@
 	.quad 0x00009a0000000000	/* 0x50 APM CS 16 code (16 bit) */
 	.quad 0x0040920000000000	/* 0x58 APM DS    data */
 	.fill NR_CPUS*4,8,0		/* space for TSS's and LDT's */
-		
-/*
- * This is to aid debugging, the various locking macros will be putting
- * code fragments here.  When an oops occurs we'd rather know that it's
- * inside the .text.lock section rather than as some offset from whatever
- * function happens to be last in the .text segment.
- */
-.section .text.lock
-ENTRY(stext_lock)

Index: i386_ksyms.c
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/i386_ksyms.c,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- i386_ksyms.c	10 Apr 2002 14:23:20 -0000	1.2
+++ i386_ksyms.c	10 Jun 2003 01:45:55 -0000	1.3
@@ -35,6 +35,8 @@
 #if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
 extern void machine_real_restart(unsigned char *, int);
 EXPORT_SYMBOL(machine_real_restart);
+extern void default_idle(void);
+EXPORT_SYMBOL(default_idle);
 #endif
 
 #ifdef CONFIG_SMP
@@ -93,7 +95,6 @@
 
 EXPORT_SYMBOL(strtok);
 EXPORT_SYMBOL(strpbrk);
-EXPORT_SYMBOL(simple_strtol);
 EXPORT_SYMBOL(strstr);
 
 EXPORT_SYMBOL(strncpy_from_user);

Index: pci-irq.c
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/pci-irq.c,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- pci-irq.c	10 Apr 2002 14:23:21 -0000	1.2
+++ pci-irq.c	10 Jun 2003 01:45:55 -0000	1.3
@@ -225,12 +225,12 @@
  */
 static int pirq_cyrix_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 {
-	return read_config_nybble(router, 0x5C, pirq-1);
+	return read_config_nybble(router, 0x5C, (pirq-1)^1);
 }
 
 static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
-	write_config_nybble(router, 0x5C, pirq-1, irq);
+	write_config_nybble(router, 0x5C, (pirq-1)^1, irq);
 	return 1;
 }
 

Index: pci-pc.c
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/pci-pc.c,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- pci-pc.c	10 Jun 2003 01:13:14 -0000	1.3
+++ pci-pc.c	10 Jun 2003 01:45:56 -0000	1.4
@@ -1109,22 +1109,29 @@
 }
 
 /*
- * Nobody seems to know what this does. Damn.
+ * Addresses issues with problems in the memory write queue timer in
+ * certain VIA Northbridges.  This bugfix is per VIA's specifications.
  *
- * But it does seem to fix some unspecified problem
- * with 'movntq' copies on Athlons.
- *
- * VIA 8363 chipset:
- *  - bit 7 at offset 0x55: Debug (RW)
+ * VIA 8363,8622,8361 Northbridges:
+ *  - bits  5, 6, 7 at offset 0x55 need to be turned off
+ * VIA 8367 (KT266x) Northbridges:
+ *  - bits  5, 6, 7 at offset 0x95 need to be turned off
  */
-static void __init pci_fixup_via_athlon_bug(struct pci_dev *d)
+static void __init pci_fixup_via_northbridge_bug(struct pci_dev *d)
 {
 	u8 v;
-	pci_read_config_byte(d, 0x55, &v);
-	if (v & 0x80) {
-		printk("Trying to stomp on Athlon bug...\n");
-		v &= 0x7f; /* clear bit 55.7 */
-		pci_write_config_byte(d, 0x55, v);
+	int where = 0x55;
+
+	if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
+		where = 0x95; /* the memory write queue timer register is 
+				 different for the kt266x's: 0x95 not 0x55 */
+	}
+
+	pci_read_config_byte(d, where, &v);
+	if (v & 0xe0) {
+		printk("Disabling VIA memory write queue: [%02x] %02x->%02x\n", where, v, v & 0x1f);
+		v &= 0x1f; /* clear bits 5, 6, 7 */
+		pci_write_config_byte(d, where, v);
 	}
 }
 
@@ -1137,7 +1144,10 @@
 	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_5597,		pci_fixup_latency },
 	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_5598,		pci_fixup_latency },
  	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_82371AB_3,	pci_fixup_piix4_acpi },
-	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8363_0,	pci_fixup_via_athlon_bug },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8363_0,	pci_fixup_via_northbridge_bug },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8622,	        pci_fixup_via_northbridge_bug },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8361,	        pci_fixup_via_northbridge_bug },
+	{ PCI_FIXUP_HEADER,	PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_8367_0,	pci_fixup_via_northbridge_bug },
 	{ 0 }
 };
 

Index: process.c
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/process.c,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- process.c	10 Apr 2002 14:23:21 -0000	1.2
+++ process.c	10 Jun 2003 01:45:56 -0000	1.3
@@ -41,6 +41,7 @@
 #include <asm/ldt.h>
 #include <asm/processor.h>
 #include <asm/i387.h>
+#include <asm/irq.h>
 #include <asm/desc.h>
 #include <asm/mmu_context.h>
 #ifdef CONFIG_MATH_EMULATION
@@ -77,7 +78,7 @@
  * We use this if we don't have any better
  * idle routine..
  */
-static void default_idle(void)
+void default_idle(void)
 {
 	if (current_cpu_data.hlt_works_ok && !hlt_counter) {
 		__cli();
@@ -542,6 +543,8 @@
 			BUG();
 		}
 	}
+
+	release_x86_irqs(dead_task);
 }
 
 /*

Index: setup.c
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/setup.c,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -r1.3 -r1.4
--- setup.c	10 Jun 2003 01:13:14 -0000	1.3
+++ setup.c	10 Jun 2003 01:45:56 -0000	1.4
@@ -827,10 +827,8 @@
 #define PFN_PHYS(x)	((x) << PAGE_SHIFT)
 
 /*
- * 128MB for vmalloc and initrd
+ * Reserved space for vmalloc and iomap - defined in asm/page.h
  */
-#define VMALLOC_RESERVE	(unsigned long)(128 << 20)
-#define MAXMEM		(unsigned long)(-PAGE_OFFSET-VMALLOC_RESERVE)
 #define MAXMEM_PFN	PFN_DOWN(MAXMEM)
 #define MAX_NONPAE_PFN	(1 << 20)
 
@@ -2234,7 +2232,7 @@
 			 */
 #define NR_SIBLINGS	2
 			if (smp_num_siblings != NR_SIBLINGS) {
-				printk(KERN_WARNING "CPU: Unsuppored number of the siblings %d", smp_num_siblings);
+				printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings);
 				smp_num_siblings = 1;
 				goto too_many_siblings;
 			}

Index: signal.c
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/signal.c,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- signal.c	10 Apr 2002 14:23:21 -0000	1.2
+++ signal.c	10 Jun 2003 01:45:56 -0000	1.3
@@ -28,7 +28,7 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-asmlinkage int FASTCALL(do_signal(struct pt_regs *regs, sigset_t *oldset));
+int FASTCALL(do_signal(struct pt_regs *regs, sigset_t *oldset));
 
 int copy_siginfo_to_user(siginfo_t *to, siginfo_t *from)
 {

Index: time.c
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/time.c,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- time.c	10 Apr 2002 14:23:21 -0000	1.2
+++ time.c	10 Jun 2003 01:45:56 -0000	1.3
@@ -681,7 +681,6 @@
 #ifndef do_gettimeoffset
 			do_gettimeoffset = do_fast_gettimeoffset;
 #endif
-			do_get_fast_time = do_gettimeofday;
 
 			/* report CPU clock rate in Hz.
 			 * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) =

Index: vm86.c
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.4/arch/i386/kernel/vm86.c,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- vm86.c	10 Apr 2002 14:23:21 -0000	1.2
+++ vm86.c	10 Jun 2003 01:45:56 -0000	1.3
@@ -16,6 +16,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgalloc.h>
 #include <asm/io.h>
+#include <asm/irq.h>
 
 /*
  * Known problems:
@@ -62,7 +63,7 @@
         ( (unsigned)( & (((struct kernel_vm86_regs *)0)->VM86_REGS_PART2) ) )
 #define VM86_REGS_SIZE2 (sizeof(struct kernel_vm86_regs) - VM86_REGS_SIZE1)
 
-asmlinkage struct pt_regs * FASTCALL(save_v86_state(struct kernel_vm86_regs * regs));
+struct pt_regs * FASTCALL(save_v86_state(struct kernel_vm86_regs * regs));
 struct pt_regs * save_v86_state(struct kernel_vm86_regs * regs)
 {
 	struct tss_struct *tss;
@@ -610,6 +611,14 @@
 	}
 	read_unlock(&tasklist_lock);
 	return ret;
+}
+
+void release_x86_irqs(struct task_struct *task)
+{
+	int i;
+	for (i=3; i<16; i++)
+	    if (vm86_irqs[i].tsk == task)
+		free_vm86_irq(i);
 }
 
 static inline void handle_irq_zombies(void)