Update of /cvsroot/linux-vax/kernel-2.5/arch/vax
In directory sc8-pr-cvs1.sourceforge.net:/tmp/cvs-serv22341
Modified Files:
Makefile
Log Message:
- Just sorting out some diffs to HEAD. No real changes here...
Index: Makefile
===================================================================
RCS file: /cvsroot/linux-vax/kernel-2.5/arch/vax/Makefile,v
retrieving revision 1.35
retrieving revision 1.36
diff -u -d -r1.35 -r1.36
--- Makefile 7 Apr 2005 22:56:26 -0000 1.35
+++ Makefile 20 Apr 2005 10:13:11 -0000 1.36
@@ -21,12 +21,11 @@
# in the top-level Makefile. We want -O1, not -O2.
CFLAGS := $(subst -O2,-O1,$(CFLAGS) )
-
+
# These flags are used by the top-level makefile when linking
# the kernel
-LDFLAGS_vmlinux=-N -nostartfiles -nostdlib \
- -noinhibit-exec -warn-once \
- -Map vmlinux.map -cref
+LDFLAGS_vmlinux=-N -nostartfiles -nostdlib -noinhibit-exec -warn-once \
+ -Map vmlinux.map -cref
# Tell the top-level makefile about the addition arch-specific
# stuff that's needed
@@ -52,13 +51,14 @@
TOOLS:
$(Q)$(MAKE) $(build)=$(TOOLSDIR)
+#
# This will make a disk-bootable image. dd this directly to a
-# disk and then tell your VAX to boot from this disk
+# disk and then tell your VAX to boot from this disk.
#
-# NOTE:
+# NOTE:
# If you want to keep a partition table on the disk, and use
# a boot loader to load the kernel from a file system, then
-# use the vmlinux.SYS and something like asbl. Dont forget to
+# use the vmlinux.SYS and something like asbl. Don't forget to
# set the command line to something useful like "root=/dev/sda1"
#
diskboot: vmlinux.dsk
@@ -87,17 +87,17 @@
vmlinux.dsk: vmlinux.bin TOOLS
$(call cmd,mkdsk)
$(call cmd,setcmd)
-
-# this is helpful for low level debuggery
-listfile:
+
+# This is helpful for low level debuggery
+listfile:
rm -f vmlinux.lst
- $(OBJDUMP) -D vmlinux > vmlinux.lst
+ $(OBJDUMP) -D vmlinux > vmlinux.lst
CLEAN_FILES += include/asm-$(ARCH)/asm_offsets.h
prepare: include/asm-$(ARCH)/asm_offsets.h
arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
- include/config/MARKER
+ include/config/MARKER
include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s
$(call filechk,gen-asm-offsets)
@@ -106,14 +106,14 @@
@rm -f vmlinux.* vmlinux
@cd $(TOPDIR)/arch/vax ; rm -f *.out TEST.BIN TEST.SYS
@cd $(TOOLSDIR) ; rm -f setcmdline showcmdline mkbootblk
-
+
archmrproper:
define archhelp
- echo '* mopboot - MOP-bootable kernel image (vmlinux.SYS)'
- echo '* diskboot - HDD bootable kernel image (vmlinux.dsk)'
- echo ''
- echo 'Notice: module support is not complete right now'
+ echo '* mopboot - MOP-bootable kernel image (vmlinux.SYS)'
+ echo '* diskboot - HDD bootable kernel image (vmlinux.dsk)'
+ echo ''
+ echo 'Notice: module support is not complete right now'
endef
clean: archclean
|
