thanks a lot for the quick response.
I downloaded the installation medium and booted the live media.
Attached you can find the dmesg that shows the same behavior as with
Fedora.
On Sun, 2018-04-15 at 14:44 +0000, rizea romulus wrote:
> Try to install Linux Mint 18.3 on that machine
>
>
>
>
>
>
>
> On Sunday, April 15, 2018, 4:43:09 PM GMT+3,
> owa...@gm... <owa...@gm...> wrote:
>
>
>
>
>
> Hello,
>
> I do have an Asus N550 laptop with integrated WebCAM.
>
> However uvc in Fedora FC27 does not provide a /dev/video device for
> it.
> Any suggestions how to configure my Linux to use the WebCAM ?
>
> In Windows the WebCAM works well, however with a generic driver the
> picture is flipped upside down as known for other ASUS integrated
> WebCAMs as well.
>
> dmesg output
> [ 0.000000] microcode: microcode updated early to revision 0x24,
> date = 2018-01-21
> [ 0.000000] Linux version 4.15.15-300.fc27.x86_64 (mockbuild@bkern
> el
> 01.phx2.fedoraproject.org) (gcc version 7.3.1 20180303 (Red Hat
> 7.3.1-
> 5) (GCC)) #1 SMP Mon Apr 2 23:14:02 UTC 2018
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.15.15-
> 300.fc27.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/root
> rd.lvm.lv=fedora/swap rhgb quiet LANG=en_US.UTF-8
> ...
> [19444.843847] usb 3-7: USB disconnect, device number 14
> [19445.098380] usb 3-7: new high-speed USB device number 15 using
> xhci_hcd
> [19445.258263] usb 3-7: New USB device found, idVendor=04f2,
> idProduct=b3fd
> [19445.258267] usb 3-7: New USB device strings: Mfr=3, Product=1,
> SerialNumber=2
> [19445.258270] usb 3-7: Product: USB2.0 HD UVC WebCam
> [19445.258272] usb 3-7: Manufacturer: Chicony Electronics Co.,Ltd.
> [19445.258274] usb 3-7: SerialNumber: 0x0001
> [19445.261264] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam
> (04f2:b3fd)
> [19445.262665] uvcvideo 3-7:1.0: Entity type for entity Extension 4
> was
> not initialized!
> [19445.262671] uvcvideo 3-7:1.0: Entity type for entity Processing 2
> was not initialized!
> [19445.262675] uvcvideo 3-7:1.0: Entity type for entity Camera 1 was
> not initialized!
> [19445.262928] input: USB2.0 HD UVC WebCam: USB2.0 HD as
> /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input35
>
> Attached the lsusb -v output
>
> Thanks a lot for your support.---------------------------------------
> ---------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot__________
> _____________________________________
> Linux-uvc-devel mailing list
> Lin...@li...
> https://lists.sourceforge.net/lists/listinfo/linux-uvc-devel
>
>
> |
