|
From: SourceForge.net <no...@so...> - 2005-09-30 13:53:07
|
Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3362233 By: nobody I forgot to say that I compiled my ntfsprogs from the sourceforge tarball source, using Knoppix and they run from the linux partition, /dev/uba2. ______________________________________________________________________ You are receiving this email because you elected to monitor this forum. To stop monitoring this forum, login to SourceForge.net and visit: https://sourceforge.net/forum/unmonitor.php?forum_id=44085 |
|
From: SourceForge.net <no...@so...> - 2005-09-30 14:01:48
|
Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3362250 By: szaka > Using ntfsprogs 1.11.2. I am trying to copy (not clone) the original You can't copy NTFS without losing data. > NTFS partition on my compaq portable, which runs XP home, to a 2nd , > larger drive so I can replace the "original". The 2nd is temporaily in > an external case using USB. > > With a recent Knoppix, the original is /dev/hda1 and the 2nd is /dev/uba1. It > was NTFS but the the NTFS size was smaller than the partition size (don't ask). > > So I tried nfsresize. You mean that you wanted to enlarge the partition? > It kept saying something about " marked offline by XP because not > shutdown, restart XP". Ntfsresize doesn't have any such message. Not even close! My wild guess is either of the belows: "Apparently the NTFS journal file is unclean. Please shutdown Window properly before using this software. If it wouldn't help then please report it to lin...@li.... Thank you." "Apparently you have a corrupted NTFS. Please run the filesystem checker on Windows by invoking chkdsk /f. Don't forget the /f (force) parameter, it's important! You probably also need to reboot Windows to take effect. Then you can try ntfsresize again. No modification was made to your NTFS." In the first case you must boot Windows and in the latter one run chkds /f then reboot Windows __TWICE__. ______________________________________________________________________ You are receiving this email because you elected to monitor this forum. To stop monitoring this forum, login to SourceForge.net and visit: https://sourceforge.net/forum/unmonitor.php?forum_id=44085 |
|
From: SourceForge.net <no...@so...> - 2005-09-30 16:26:36
|
Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3362599 By: nobody > You can't copy NTFS without losing dat I will use XP xcopy. Are you quite sure this will lose data? yes, enlarge My "resize message" was incorrect, it was "Apparently the NTFS partition is hibernated. Windows must be resumed and\n" "turned off properly, thus resizing will be possible later on.\n"; As i said, I rebooted XP, ran chkdsk just in case, shut down XP normally, rebooted Knoppix. Same error message. The only curent problem is the -H & -S options being rejected by mkntfs and messages of the form: "XXXX not specified for %s and it " "could not\nbe obtained automatically." " Setting it to 0. This will cause " "Windows not to\nbe able to boot from " "this volume.\n", Stop the Presses!! The error comes from the following line in mkntfs.c: while ((c = getopt(argc, argv, "c:fh?np:qs:vz:CFTIL:QVl")) != EOF) easy to fix unless some knowledgable person decided these options should not be used. anyone know if they are OK to use? ______________________________________________________________________ You are receiving this email because you elected to monitor this forum. To stop monitoring this forum, login to SourceForge.net and visit: https://sourceforge.net/forum/unmonitor.php?forum_id=44085 |
|
From: SourceForge.net <no...@so...> - 2005-09-30 18:03:43
|
Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3362633 By: szaka > My "resize message" was incorrect, it was "Apparently the NTFS partition > is hibernated. Windows must be resumed and\n" "turned off properly, thus > resizing will be possible later on.\n"; Then either your Windows is indeed hibernated or you have found a bug. But nobody reported this for non-hibernated Windows so please double check this out. If it's indeed not hibernated then could you download this debug version http://linux-ntfs.sourceforge.net/snapshots/ntfsresize-static-1.11.2.tgz run ntfsresize -dff <partition> and send the last 20 lines? ______________________________________________________________________ You are receiving this email because you elected to monitor this forum. To stop monitoring this forum, login to SourceForge.net and visit: https://sourceforge.net/forum/unmonitor.php?forum_id=44085 |
|
From: SourceForge.net <no...@so...> - 2005-09-30 19:23:03
|
Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3362668 By: nobody Szaka, Thanks for your response. I will perform the above procedure after I accomplish my disk copy. The issues are: 1. Assuming I use the corect xcopy options, does anyone know if can i use XP xcopy to copy mounted NTFS partitions without losing data? 2. Is the above code from mkntfs.c a bug or a restriction? Arnold ______________________________________________________________________ You are receiving this email because you elected to monitor this forum. To stop monitoring this forum, login to SourceForge.net and visit: https://sourceforge.net/forum/unmonitor.php?forum_id=44085 |
|
From: SourceForge.net <no...@so...> - 2005-10-03 10:26:02
|
Read and respond to this message at: https://sourceforge.net/forum/message.php?msg_id=3364704 By: szaka Anton has fixed the mkntfs bug. Thanks Arnold. ______________________________________________________________________ You are receiving this email because you elected to monitor this forum. To stop monitoring this forum, login to SourceForge.net and visit: https://sourceforge.net/forum/unmonitor.php?forum_id=44085 |
