[Linux-mips-commits]CVS: linux/arch/mips/vr41xx/vr4111/clio-1000 Makefile,NONE,1.1 prom.c,NONE,1.1 setup.c,NONE,1.1

[Paul M. <le...@us...>]

Update of /cvsroot/linux-mips/linux/arch/mips/vr41xx/vr4111/clio-1000
In directory usw-pr-cvs1:/tmp/cvs-serv29866/clio-1000

Added Files:
	Makefile prom.c setup.c 
Log Message:
Add it back in, under the new structure..



--- NEW FILE: Makefile ---
#
# Makefile for the Vadem Clio 1000 / Sharp Mobilon Tripad PV-6000
#
# Note! Dependencies are done automagically by 'make dep', which also
# removes any old dependencies. DON'T put your own dependencies here
# unless it's something special (ie not a .c file).
#

.S.s:
	$(CPP) $(AFLAGS) $< -o $@
.S.o:
	$(CC) $(AFLAGS) -c $< -o $@

O_TARGET := clio-1000.o

all: clio-1000.o

obj-y	 := setup.o prom.o

include $(TOPDIR)/Rules.make

--- NEW FILE: prom.c ---
/*
 * arch/mips/vr4111/clio-1000/prom.c
 *
 * Copyright (C) 1999 Bradley D. LaRonde and Michael Klar
 *
 * Copyright (C) 2001 Jim Paris <ji...@jt...>
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 */

#include <linux/init.h>
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <asm/bootinfo.h>
#include <asm/vr41xx.h>

char arcs_cmdline[CL_SIZE];

extern unsigned long probe_ram_size(void);

const char *get_system_type(void)
{
        return "NEC_Vr41xx Vadem Clio 1000";
}

void __init prom_init(int argc, char **argv, char **envp)
{
	unsigned long mem_detected;
	int i;

	/*
         * Clear ERL and EXL in case the bootloader got us here
	 * through an exception 
	 */
	write_32bit_cp0_register(CP0_STATUS, 0);

	/* 
	 * Collect args and prepare cmd_line
	 */
	strcpy(arcs_cmdline, "");
	for (i = 1; i < argc; i++) {
		strcat(arcs_cmdline, argv[i]);
		if (i < (argc - 1))
			strcat(arcs_cmdline, " ");
	}

	mips_machgroup = MACH_GROUP_NEC_VR41XX;
	mips_machtype = MACH_VADEM_CLIO_1000;

	mem_detected = probe_ram_size();
	printk("Detected %dMB of memory.\n",(int)mem_detected >> 20);

	add_memory_region(0, mem_detected, BOOT_MEM_RAM);
}

void __init prom_free_prom_memory(void)
{
}


--- NEW FILE: setup.c ---
/*
 * linux/arch/mips/vr4111/setup.c
 *
 * VR41xx setup routines
 *
 * Copyright (C) 1999 Bradley D. LaRonde
 * Copyright (C) 1999, 2000 Michael Klar
 *
 * Copyright 2001 MontaVista Software Inc.
 * Author: js...@mv... or js...@ju...
 *
 * Copyright 2001 Jim Paris <ji...@jt...>
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 */

#include <linux/config.h>
#include <linux/console.h>
#ifdef CONFIG_IDE
#include <linux/ide.h>
#endif
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/time.h>
#include <asm/reboot.h>
#include <asm/vr41xx.h>
#include <asm/io.h>

extern void vr41xx_restart(char *c);
extern void vr4111_hibernate(void);
extern void vr4111_wait(void);
extern void vr4111_time_init(void);
extern void vr4111_timer_setup(void);

#ifdef CONFIG_IDE
extern struct ide_ops std_ide_ops;
#endif

#ifdef CONFIG_PCMCIA
void __init put_cf_reg(unsigned char reg, unsigned char val)
{
	/* PCMCIA controller (VG469) is mapped here */
	outb(reg, 0x3e0);
	outb(val, 0x3e1);
}
#endif

void __init bus_error_init(void)
{
}

void __init clio_1000_setup(void)
{
	unsigned short val;
 
	set_io_port_base(VR41XX_PORT_BASE); 
	isa_slot_offset = VR41XX_ISAMEM_BASE;

	board_time_init = vr4111_time_init;
	board_timer_setup = vr4111_timer_setup;

	_machine_restart = vr41xx_restart;
	_machine_halt = vr4111_hibernate;
	_machine_power_off = vr4111_hibernate;
	cpu_wait = vr4111_wait;

#ifdef CONFIG_IDE
	ide_ops = &std_ide_ops;
#endif

#ifdef CONFIG_FB
	conswitchp = &dummy_con;
#endif

#ifdef CONFIG_PCMCIA
	/* Reset the PCMCIA and CF and power them off */
	put_cf_reg(0x03, 0x20);   /* Socket 0 */
	put_cf_reg(0x43, 0x20);   /* Socket 1 */
	put_cf_reg(0x02, 0x00);   /* Socket 0 */
	put_cf_reg(0x42, 0x00);   /* Socket 1 */
#endif

	/* Clio-specific RS232 enable */
	*VR41XX_GIUPODATL |= VR41XX_GIUPODATL_GPIO42;

	vr4111_init_serial();

	/* Turn the green LED on (debug) */
	*VR41XX_GIUPODATH = 0;
	*VR41XX_GIUPODATH = 0x302;
	*VR41XX_GIUPODATH = 0x303;
	*VR41XX_GIUPODATH = 0;
}