[Linux-mips-commits]CVS: linux/include/linux buttons.h,NONE,1.1 tpanel.h,NONE,1.1 fb.h,1.2,1.3 miscdevice.h,1.3,1.4

[Leblanc f. <fle...@us...>]

Update of /cvsroot/linux-mips/linux/include/linux
In directory usw-pr-cvs1:/tmp/cvs-serv3157/include/linux

Modified Files:
	fb.h miscdevice.h 
Added Files:
	buttons.h tpanel.h 
Log Message:
Adds more VR stuff for Cassiopeia E15 Support.


--- NEW FILE: buttons.h ---
/* 
 * Data defines for button input
 *
 * This was created for the NEC VR41xx GPIO button driver, but should be
 * general enough that it applies to other platforms as well.
 *
 * Copyright (c) 2000 Michael Klar <wyl...@in...>
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 */

#ifndef _LINUX_BUTTONS_H
#define _LINUX_BUTTONS_H


#define BTN_PRESS	0x8000
#define BTN_RELEASE	0

#define BTN_STATE_MASK	0x8000
#define BTN_DATA_MASK	0x0fff

/*
 * The button definitions:
 *
 * Feel free to add more.  With 4096 potential vlaues, we're not going to
 * run out any time soon.  Note that the application types listed for the
 * BTN_AP buttons are only suggestions for which AP buttons to assign to
 * which physical button based on button icon, and may not be applicable
 * to platforms that are not productivity-oriented.
 */

#define BTN_POWER		0	// Button driver might not queue
					// BTN_POWER releases (e.g. on VR41xx).
#define BTN_ACTION		1
#define BTN_EXIT		2
#define BTN_UP			3
#define BTN_DOWN		4
#define BTN_CONTRAST		5
#define BTN_BACKLIGHT		6
#define BTN_NORTH		7
#define BTN_SOUTH		8
#define BTN_EAST		9
#define BTN_WEST		10
#define BTN_NOTIFICATION	11
#define BTN_SYNC		12
#define BTN_POWER_GPIO		13	// Power switch also hooked to GPIO to
					// detect power button releases.
#define BTN_BATT_DOOR		14
#define BTN_PEN				15

#define BTN_AP1			256	// Task list
#define BTN_AP2			257	// Address book
#define BTN_AP3			258	// Notepad
#define BTN_AP4			259	// Calendar
#define BTN_AP5			260	// Voice recorder
#define BTN_AP6			261
#define BTN_AP7			262
#define BTN_AP8			263
#define BTN_AP9			264
#define BTN_AP10		265
#define BTN_AP11		266
#define BTN_AP12		267
#define BTN_AP13		268
#define BTN_AP14		269
#define BTN_AP15		270
#define BTN_AP16		271

#define BTN_AP17		272
#define BTN_AP18		273
#define BTN_AP19		274
#define BTN_AP20		275
#define BTN_AP21		276
#define BTN_AP22		277
#define BTN_AP23		278
#define BTN_AP24		279
#define BTN_AP25		280
#define BTN_AP26		281
#define BTN_AP27		282
#define BTN_AP28		283
#define BTN_AP29		284
#define BTN_AP30		285
#define BTN_AP31		286
#define BTN_AP32		287

#define BTN_AP33		288
#define BTN_AP34		289
#define BTN_AP35		290
#define BTN_AP36		291
#define BTN_AP37		292

#endif /* _LINUX_BUTTONS_H */

--- NEW FILE: tpanel.h ---
/* 
 * Touch Panel Data Structures
 * by Michael Klar, wyl...@in...
 *
 * Created for the touch panel interface built into the NEC VR41xx family of
 * CPUs, but should be applicable to other touch panel hardware
 */

#ifndef _LINUX_TPANEL_H
#define _LINUX_TPANEL_H

#include <linux/ioctl.h>

/*
 * The scan interval and settling time can be set via IOCTL, but the defualt
 * of .01 sec and 480us should suffice for most applications.  The argument to
 * these IOCTL calls is a struct of the values in microseconds, but note that
 * the hardware may have a less precise interval.  If so, the value will be
 * rounded and the actual value returned back.
 */

struct scanparam {
	unsigned int	interval;
	unsigned int	settletime;
};

#define TPGETSCANPARM _IOR( 0xB0, 0x00, struct scanparam )
#define TPSETSCANPARM _IOW( 0xB0, 0x01, struct scanparam )

#endif /* _LINUX_TPANEL_H */

Index: fb.h
===================================================================
RCS file: /cvsroot/linux-mips/linux/include/linux/fb.h,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -d -r1.2 -r1.3
--- fb.h	17 Aug 2001 22:53:26 -0000	1.2
+++ fb.h	7 Mar 2002 09:15:17 -0000	1.3
@@ -32,6 +32,12 @@
 #define FBIOPUT_MODEINFO        0x4617
 #define FBIOGET_DISPINFO        0x4618
 
+/* For Linux VR */
+#define FBIOGET_BACKLIGHT       0x4620
+#define FBIOPUT_BACKLIGHT       0x4621
+#define FBIOGET_CONTRAST        0x4622
+#define FBIOPUT_CONTRAST        0x4623
+#define FBIO_POWER              0x4624
 
 #define FB_TYPE_PACKED_PIXELS		0	/* Packed Pixels	*/
 #define FB_TYPE_PLANES			1	/* Non interleaved planes */

Index: miscdevice.h
===================================================================
RCS file: /cvsroot/linux-mips/linux/include/linux/miscdevice.h,v
retrieving revision 1.3
retrieving revision 1.4
diff -u -d -r1.3 -r1.4
--- miscdevice.h	6 Nov 2001 00:30:47 -0000	1.3
+++ miscdevice.h	7 Mar 2002 09:15:17 -0000	1.4
@@ -13,6 +13,7 @@
 #define APOLLO_MOUSE_MINOR 7
 #define PC110PAD_MINOR 9
 #define ADB_MOUSE_MINOR 10
+#define VR41XX_TPANEL_MINOR 11
 #define WATCHDOG_MINOR		130	/* Watchdog timer     */
 #define TEMP_MINOR		131	/* Temperature Sensor */
 #define RTC_MINOR 135
@@ -21,6 +22,7 @@
 #define LCD_MINOR 140
 #define NVRAM_MINOR 144
 #define I2O_MINOR 166
+#define VR41XX_BUTTONS_MINOR 180
 #define MICROCODE_MINOR		184
 #define GPIO_MINOR             185  
 #define MWAVE_MINOR		219	/* ACP/Mwave Modem */