Update of /cvsroot/linux-mips/linux/arch/mips/philips/nino
In directory usw-pr-cvs1:/tmp/cvs-serv26774/arch/mips/philips/nino
Modified Files:
Makefile prom.c setup.c
Added Files:
TODO power.c
Removed Files:
time.c
Log Message:
Nino updates.
--- NEW FILE: TODO ---
This is a basic TODO list for the Philips Nino porting effort. Things
will be added and removed from time to time. Pick an item and help
me out! Thanks!
- COMPACTFLASH
* get IDE/PCMCIA chip interface working to read flash cards and the
ethernet card
- FRAMEBUFFER
* complete rewrite to match new framebuffer API
* get 2bpp and 4bpp working (use Microwindows driver examples)
- GPIO
* go through all the interrupt sources in status registers 1-5
and see what all the different IO pins are hooked to
- KGDB
* get stub working
- SERIAL
* complete rewrite and use only one interrupt instead of two
Index: Makefile
===================================================================
RCS file: /cvsroot/linux-mips/linux/arch/mips/philips/nino/Makefile,v
retrieving revision 1.7
retrieving revision 1.8
diff -u -d -r1.7 -r1.8
--- Makefile 2001/11/04 19:20:38 1.7
+++ Makefile 2001/11/13 17:10:09 1.8
@@ -15,12 +15,9 @@
all: nino.o
-obj-y := int-handler.o irq.o setup.o \
- prom.o power.o time.o
+obj-y := int-handler.o irq.o setup.o prom.o power.o
int-handler.o: int-handler.S
-
-obj-$(CONFIG_REMOTE_DEBUG) += kgdb.o
clean:
rm -f *.o
Index: prom.c
===================================================================
RCS file: /cvsroot/linux-mips/linux/arch/mips/philips/nino/prom.c,v
retrieving revision 1.5
retrieving revision 1.6
diff -u -d -r1.5 -r1.6
--- prom.c 2001/11/06 20:23:54 1.5
+++ prom.c 2001/11/13 17:10:09 1.6
@@ -30,7 +30,6 @@
unsigned long magic, int *prom_vec)
{
unsigned long mem_size;
- unsigned int i;
strcpy(arcs_cmdline, "console=tty0 console=ttyS0,115200");
Index: setup.c
===================================================================
RCS file: /cvsroot/linux-mips/linux/arch/mips/philips/nino/setup.c,v
retrieving revision 1.6
retrieving revision 1.7
diff -u -d -r1.6 -r1.7
--- setup.c 2001/11/06 20:23:54 1.6
+++ setup.c 2001/11/13 17:10:09 1.7
@@ -9,6 +9,7 @@
*
* Interrupt and exception initialization for Philips Nino
*/
+#include <linux/console.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
@@ -46,15 +47,17 @@
static __init void nino_time_init(void)
{
- unsigned int scratch = 0;
+ /* Load the counter and enable the timer */
+ outl(TX3912_SYS_TIMER_VALUE, TX3912_TIMER_PERIOD);
+ outl(TX3912_TIMER_CTRL_ENPERTIMER, TX3912_TIMER_CTRL);
- RTCperiodTimer = PER_TIMER_COUNT;
- RTCtimerControl = TIM_ENPERTIMER;
- IntEnable5 |= INT5_PERIODICINT;
+ /* Enable the timer clock line */
+ outl(inl(TX3912_CLK_CTRL) | TX3912_CLK_CTRL_ENTIMERCLK,
+ TX3912_CLK_CTRL);
- scratch = inl(TX3912_CLK_CTRL_BASE);
- scratch |= TX3912_CLK_CTRL_ENTIMERCLK;
- outl(scratch, TX3912_CLK_CTRL_BASE);
+ /* Enable the interrupt */
+ outl(inl(TX3912_INT5_ENABLE) | TX3912_INT5_PERINT,
+ TX3912_INT5_ENABLE);
}
static __init void nino_timer_setup(struct irqaction *irq)
@@ -79,6 +82,10 @@
board_timer_setup = nino_timer_setup;
cpu_wait = nino_wait;
+
+#ifdef CONFIG_FB
+ conswitchp = &dummy_con;
+#endif
nino_board_init();
}
--- time.c DELETED ---
|
