[linux-iscsi-devel] [ linux-iscsi-Bugs-1189454 ] iscsi-ls -l gives segmrantion fault with MSA1000 configured

[SourceForge.net <no...@so...>]

Bugs item #1189454, was opened at 2005-04-25 18:44
Message generated for change (Tracker Item Submitted) made by Item Submitter
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=387023&aid=1189454&group_id=26396

Category: iscsi-drvr
Group: 3.6.2
Status: Open
Resolution: None
Priority: 7
Submitted By: Nitin (cnitin)
Assigned to: Smitha Narayanaswamy (smithan)
Summary: iscsi-ls -l gives segmrantion fault with MSA1000 configured

Initial Comment:
(i) Output of iscsi-ls -l
[root@linux-2 src]# iscsi-ls -l
******************************************************************
*************
        SFNet iSCSI Driver Version ... 3.6.2 (27-Sep-2004 )
******************************************************************
*************
Segmentation fault

(ii) On MDS the setup is like:
MDS# sh iscsi virtual-target iqn.2004-
04.com.cisco.cnitin-msafull
target: iqn.2004-04.com.cisco.cnitin-msafull
    Port WWN 50:08:05:f3:00:03:05:31
    Configured node
    No. of advertised interface: 1
      GigabitEthernet 2/1
    No. of initiators permitted: 1
      initiator 10.1.1.24/32 is permitted
    all initiator permit is disabled
    trespass support is  disabled
    revert to primary support is  disabled


----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=387023&aid=1189454&group_id=26396