Re: [Linux-gpib-general] [Warning Possible spam] Re: RSQ example help

[Søren K. <sq...@dt...>]

Hi list.


We also have a publicly available system which communicates fine with Keithley multimeters (and in the past has worked fine with 2000's although we have phased those out for 2700's as the 2000's are not produced anymore 😊)


It can be downloaded from here: https://www.elchemea.com/gpib/


It has not been tested with a RPi, but as it is written in pure C it should work assuming the linux-gpib driver can be installed


best regards


Søren Koch
Senior Development Engineer
Mob: +45 21325247
sq...@dt...
Fysikvej
Building 310
2800 Kgs. Lyngby


________________________________
From: Julien Salort <li...@sa...>
Sent: Friday, December 24, 2021 7:44:22 PM
To: lin...@li...
Subject: [Warning Possible spam] Re: [Linux-gpib-general] RSQ example help


Le 20/12/2021 à 21:47, lucas a écrit :

> i've successfully installed and tested linux-gpib on a raspberry pi 4+b
> with a NI-GPIB-USB-HS dongle and communicating with a Keithley 2000 DMM
> instrument using python 3.  should be fairly common and pervasive  i
> have python sending *idn? and receiving the proper instrument response,
> "KEITHLEY INSTRUMENT INC., MODEL 2000, ..." etc.  so that much is
> working well.

Hello,

We've made public the code that we use in our lab. It may or may not
suit your needs.

The code is here for the Keithley 2700. I no longer have a Keithley
2000, so I haven't tried with this model for some time.

<https://fluiddyn.readthedocs.io/projects/fluidlab/en/latest/generated/fluidlab.instruments.multiplexer.keithley_2700.html#module-fluidlab.instruments.multiplexer.keithley_2700>

Cheers,

Julien


_______________________________________________
Linux-gpib-general mailing list
Lin...@li...
https://lists.sourceforge.net/lists/listinfo/linux-gpib-general