[Linux-gpib-general] progress?

[<tim...@ex...>]

Hello,

I now have the NI AT-GPIB-TNT software compiled.  Everything seems to be OK until I run ibtest.  The response is "trying to open pad 0..."

But the computer is totally hung.  Have to push reset.  As before, this configuration works under Win98.

I've included some supporting files below.  By the way, I've upgraded to 3.1.3.

Any suggestions appreciated.

Thanks,

Tim



gpib.conf

interface {
        minor = 0
        board_type = atgpib 
        pad = 0
        sad = 0
        timeout = 3s

        eos = 0x0a
        set-reos yes
        set-bin no

        base = 0x2C0
        irq  = 15
        dma  = 7

        master yes
}

device {
        name = bk   
        minor = 0
        pad = 26
        sad = 0
}



[root@speedy root]# lsmod
Module                  Size  Used by    Not tainted
soundcore               4100   0  (autoclean)
tnt4882                 5060   0  (unused)
nec7210                 8096   0  [tnt4882]
gpib-common            13536   0  [tnt4882]
autofs                 10244   0  (autoclean) (unused)
3c59x                  26216   1 
ext3                   62048   6 
jbd                    40376   6  [ext3]
aic7xxx               116256   7 
sd_mod                 11552  14 
scsi_mod               96524   2  [aic7xxx sd_mod]
[root@speedy root]# cat /proc/interrupts
           CPU0       
  0:      24213          XT-PIC  timer
  1:        795          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  8:          1          XT-PIC  rtc
 10:       7695          XT-PIC  aic7xxx, eth0
 12:       1334          XT-PIC  PS/2 Mouse
NMI:          0 
ERR:          0
[root@speedy root]# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(auto)
03c0-03df : vga+
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
fc00-fcff : Adaptec AIC-7881U
ff00-ff3f : 3Com Corporation 3c905 100BaseTX [Boomerang]
  ff00-ff3f : 00:0f.0
ffa0-ffaf : Intel Corp. 82371SB PIIX3 IDE [Natoma/Triton II]

dmesg:

Linux-GPIB Driver -- Kernel Release 2.4.18-0.13custom
gpib: registered atgpib interface
gpib: registered ni_pci interface
Available NI device IDs:





------------------------------------------------