[Linux-gpib-general] another try

[<tim...@ex...>]

 Hello,

I have done a fresh install of RedHat 7.3 Beta with kernel 2.4.18.  I
also installed Win98.  Under Win98, the NI AT-GPIB board installed OK
at IRQ 5, DMA 7, and IO 0x2C0.  I was able to communicate with the
board and instrument using the NI Windows software.

I was able to get linux-gpib-3.1.2 to compile and the modules to
install, but cannot communicate.

gpib.conf:

/*******************/
interface {
        minor = 0
        board_type = ni_isa
        pad = 0
        sad = 0
        timeout = 10s

        eos = 0x0a
        set-reos yes
        set-bin no

        base = 0x2C0
        irq  = 5
        dma  = 7

        master yes
}
/*********************/

/* now the device section defines the device characteristics for each device.
 */


device {
        name = bk   
        minor = 0
        pad = 26
        sad = 0
}


dmesg:

Linux-GPIB Driver -- Kernel Release 2.4.18-0.13custom
gpib: registered atgpib interface
gpib: registered ni_pci interface
Available NI device IDs:

lsmod:

[root@speedy linux-gpib-3.1.2]# lsmod
Module                  Size  Used by    Not tainted
nls_iso8859-1           2816   0  (autoclean)
sr_mod                 15192   0  (autoclean)
cdrom                  27872   0  (autoclean) [sr_mod]
soundcore               4100   0  (autoclean)
tnt4882                 5060   0  (unused)
nec7210                 8064   0  [tnt4882]
gpib-common            13504   0  [tnt4882]
autofs                 10244   0  (autoclean) (unused)
3c59x                  26216   1 
usb-uhci               21636   0  (unused)
usbcore                59072   1  [usb-uhci]
ext3                   62048   6 
jbd                    40376   6  [ext3]
aic7xxx               116256   7 
sd_mod                 11552  14 
scsi_mod               96524   3  [sr_mod aic7xxx sd_mod]



ibtest:

[root@speedy linux-gpib-3.1.2]# examples/ibtest
enter primary address for device [0-30]: 0
trying to open pad = 0 on /dev/gpib0 ...

 ibBoardFunc    :[Tue Apr 30 17:53:34 2002](-)  EDVR 
               -- errno=19 (No such device)

 ibBoardFunc    :[Tue Apr 30 17:53:34 2002](-)  EDVR 
               -- errno=19 (No such device)

 ibBoardFunc    :[Tue Apr 30 17:53:34 2002](-)  EDVR 
               -- errno=19 (No such device)
failed to get descriptor


[root@speedy linux-gpib-3.1.2]# examples/ibtest
enter primary address for device [0-30]: 26
trying to open pad = 26 on /dev/gpib0 ...

 ibBoardFunc    :[Tue Apr 30 17:54:09 2002](-)  EDVR 
               -- errno=19 (No such device)

 ibBoardFunc    :[Tue Apr 30 17:54:09 2002](-)  EDVR 
               -- errno=19 (No such device)

 ibBoardFunc    :[Tue Apr 30 17:54:09 2002](-)  EDVR 
               -- errno=19 (No such device)
failed to get descriptor


/var/log/messages when ibtest is run:

Apr 30 10:58:28 speedy kernel: gpib: no gpib board configured on /dev/gpib0




Any ideas?

Thanks,

Tim 







------------------------------------------------